Frequently Asked Questions
hide
show
Is there a recessed wall mount sensor?
There are a few options of PIR sensors that can be flush mounted in a wall, such as 753, or any of the ceiling mount sensors, depending on what range and angle you want to sense, but the best option for a stand alone sensor would be the Iconic 41EPIRM module mounted in an Iconic plate.
There is also an Iconic nightlight (3025NW) that fits on an Iconic 3025G double horizontal socket that has a PIR sensor and daylight switch that asctivates an inbuilt LED. (This does not have an independant output to switch any other load.)
Is there a PIR motion sensor mechanism in the Iconic Range?
Yes there is a new sensor mech
NZ PDL cat number is PDL352MPIR-TN
AU Clipsal cat number is 41EPIRM-TN
The Iconic PIR (Passive Infrared) Sensor Module is suitable for automatic switching (Power Saving) or security
applications in domestic and commercial premises.
The Sensor has a 100° horizontal and 82° vertical field of view with a 5-metre range. Switching capacity is 750W
incandescent, 100W fluorescent, 150W LED and 100W motor ratings.
The sensor controlled light is switched ON when infrared radiation from a moving target is detected and OFF again
when movement stops and the pre-set time delay is reached. Time delay is adjusted between 10 seconds and 15
minutes. The Sensor has a lux (light level) adjustment.
The PIR is fitted with a red LED indicating that the device is sensing the target.
