Clipsal Iconic Blank Rocker 10 Pack

Vivid White | Clipsal Iconic Blank Rocker 10 Pack

Clipsal Iconic Blank Rocker 10 Pack

Item Number: 40AR-VW

RRP (Inc. GST)

The Clipsal Iconic Blank Dolly Rocker is designed to be used with electrical switches in the Clipsal Iconic accessories range. This handy dolly rocker is ideal for use in the home.

Product Dimensions

Width icon

Width23 mm

Height icon

Height23 mm

Depth icon

Depth9 mm



Qty UoM EAN Colour




Clipsal Iconic

Product or component type


Colour tint

vivid white (VW)

Sustainable offer status

Green Premium product


Quantity per set

set of 10

Switch function

2 positions


23 mm


23 mm


9 mm

REACh Regulation

Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive


Mercury free


RoHS exemption information


China RoHS Regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental Disclosure



Unit Type of Package 1


Number of Units in Package 1


Package 1 Weight

14 g

Package 1 Height

9.17 mm

Package 1 width

20.39 mm

Package 1 Length

23.25 mm
Show all specifications

Frequently Asked Questions

hide show

What is the part code for a 40A 2P 10mA RCBO

The part number for a 40A 2pole 10mA RCBO is 4RCBE240/10.

For further information please visit https://www.clipsal.com/products/detail?CatNo=4RCBE240/10&backto=/search?q=4rcbe240/10&tab-document-1=0&itemno=4RCBE240/10
4RCBE240/10 - Max 4 Miniature Circuit Breaker/RCD, 2 Module, 2 Pole, 40A, 10mA, 10kA, 240V

Is there a 100mA, 40A, single phase RCCB?

What items come with the KITWALLBOX7?

A9Z51240 = Type B single phase RCCD
A9F54240 = 2 pole, 40A, Curve MCB
A9A26969 = Under voltage release

What protective devices are required for EV Chargers?

Protective devices which are required for EV chargers can be either RCBO or MCB+RCCB. 

For 1P 16A  => 3,7Kw load    protection devices = 20A curve C + type B 30mA ( A9F54220 + A9Z51240)
For 1P 32A  => 7Kw load       protection devices = 40A curve C + type B 30mA  ( A9F54240 + A9Z51240)
For 3P 16A  => 11Kw load     protection devices = 20A curve C + type B 30mA  ( A9F54420 + A9Z51440)
For 3P 32A  => 22Kw load     protection devices = 40A curve C + type B 30mA  ( A9F54440 + A9Z51440)

The circuit breaker value (20A or 40A) depends on the cable size, length and environmental parameters (up to the electrician)
For further information see:https://www.se.com/au/en/product-subcategory/80408-evlink-charging-station/


What are the input circuit requirements for an EV Charging Station?

What are the feeder circuit requirements for an EV Charging station?

Product Line:

The EVlink series of Level 2 charging station require a 40A, non-GFI type breaker for each charging outlet.  #8 wire is required (L1, L2, and GND).  For dual outlet charging stations, two 40A non-GFI breakers will be required (one for each charging outlet).  A neutral connection is not required for EVlink stations.
A 40A circuit breaker is required as the continuous output current from the charging station can be as high as 30A. 
The wiring dagram for a single outlet charging station is shown in the figure below.
EVlink Basic Wiring Diagram
Click the link for more information on EVlink Electric Vehicle Products
Show More