Frequently Asked Questions
hide
show
Where can I find the ASB230501 Data Sheet?
Attached is the ASB230501 Data Sheet.
Where is C/C++ program stored in memory of SCADAPack controller?
The SCADAPack 32 stores C/C++ applications in flash, but runs from RAM. The SCADAPack 3xx series stores it's C/C++ applications on a flash file system, but runs them from RAM.
What does the "383" suffix represent on and ATV71....N4383 ?
Issue:
"383" suffix on and ATV71....N4383
Product Line:
ATV71
Environment:
ATV 71H075N4…HD75N4
Cause:
N/A
Resolution:
Variable speed drive for synchronous motor with speed feedback
The drives are supplied as standard for asynchronous motors with or without sensor feedback.
ATV 71H075N4…HD75N4 drives can control not only those motors included in the standard offer, but also synchronous motors with speed feedback, by adding 383 at the end of the reference.
Example: ATV 71H075N4 becomes ATV 71H075N4383.
See available encoder interface cards.
Can a 63.75" tall PDU be installed into a 38U NetShelter CX cabinet?
Issue:
The 63.75" tall PDU does not fit onto the accessory rail. Will it fit anywhere else inside the cabinet?
Product Line:
NetShelter CX
Environment:
AR4038A, AR4038IA
Cause:
One of the 63.75" tall PDUs has been specc'd into a 38U NetShelter CX cabinet.
Resolution:
Yes, the 63.75" tall PDUs can attach to the rear mounting rail. Please see the attached file for mounting instructions.
What is the heat loss for the ATV31HU75M3X?
Issue: What is the heat loss for the ATV31HU75M3X?
Product Line: ATV31
Environment: ATV31HU75M3X
Cause: Watts dissipated
Resolution:
The total dissipated power at rated load is 388 Watts.
Is it SDI-12 protocol supported in SCADAPack controllers?
The SDI-12 protocol is a master-slave protocol and SCADAPack 32 or SCADAPack 3xx series controller can be used as a master to communicate with slave SDI-12 devices. The SCADAPack SDI-12 master can communicate with multiple slave devices. 5915 SDI-12 Interface Module (SE p/n TBUX297475) or the third party device is used as SDI-12 hardware communication layer. The SCADAPack SDI-12 driver (custom C/C++ application) enables the SCADAPack 32 or SCADAPack 3xx series controller to communicate with SDI-12 devices.SDI-12 user manual and driver are in the attachment.
Show More
