bit screw power drive

General Accessories Screws, Power Drive Bits, Power Drive Bit Phillips No.2

Catalogue Number: 357PB
bit screw power drive
RRP (Inc. GST)


hide show
Product brand
Shaft length
100 mm
Screwdriver shape
Philips No 2
Package 1 Weight
27 g
Package 1 Height
5 mm
Package 1 width
54 mm
Package 1 Length
173 mm
EU RoHS Directive
Mercury free
RoHS exemption information
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information
Environmental Disclosure

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Specifications

  • Corporate Marketing

Frequently Asked Questions

hide show

What is the part number for the bitsa box?

The part number for the bitsa box is 357TB.
Some of the key features are:
  • Tool boxes
  • 12 compartment transparent box with assorted screws, screws and quantities included
  • Includes: 357WF30 (100), 357/20 (150), 357WH12 (350), 357P30 (200), 357P20 (300), 357WH25 (100), 357PH50 (50), 357/63 (50), 357WHP32 (100), 357PH45 (100), 357/35 (100), 357/40 (100)
For further information please visit


Can the PDL 654PB do 2 way switching?

• The 654M dimmer incorporates an integral switch, and is designed for One-Way operation only. If Two-Way switching is required, then a separately switched dimmer mechanism must be used.

What is the material of construction of 357P20, pan head screws?

357P20 is made of Zinc plated steel. 

For further information, please visit


Can the PDL 654PB push button dimmer do two way dimming

No, 2 way dimming can not be achived via 654PB
However we do have a number of products which are and will enable this  
Saturn One Touch can be two 3 and 4 way dimmed
Iconic 300 series can do this with the control link slave mechs the slave mech talks to any control link master mech dimmer, timer , timeclock or switch  

We also have a number of modules that will enable two and 3 switch switching or dimming using a master iconic mech and push button or a Nero dim module

How to Install a Duct System in an EcoAisle.

How to Install a Duct System in an EcoAisle.

Product line:




Duct System Installation

IMPORTANT: Install support brackets before proceeding with the remainder of this installation.

Refer to “Support Bracket Installation” on page 38 for instructions on how to install the support brackets.


How do you set the IP Address of a M340 BMXNOE?

To set the IP Address to a M340 BMXNOE01x0 module, a new network needs to be setup. In the Unity project browser, expand the Communication folder then right click on Networks and select New Network…

Set up an Ethernet network and name it. The default name is Ethernet_1. Click OK. You will see Ethernet_1 under your Networks folder. Double-click the Ethernet_1 network and the configuration screen will appear.
Within the Ethernet network configuration the appropriate Model Family needs to be selected. The default Ethernet model family is set to a NOE. Leave the default selection. If you hover over the different model family options with your mouse you will see what each option covers as far as CPU's and NOE's.

Once the correct model family has been selected, the new network has to be linked to the BMXNOE. To link the network, select the BMXNOE Ethernet port from the Project Browser. The BMXNOE Ethernet Configuration screen will come up. On that screen you will link the network previously setup, as seen below.

Rev Date 7/18/2017

Video: How to Start your Symmetra PX 250/500 UPS

How to Start your Symmetra PX 250/500 UPS
Product line:
Symmetra PX 250/500
All Product models, all serial numbers

Begin by applying power to the UPS by Closing the Q1 Breaker (Located in System I/O Cabinet)

Once the display is completely powered up and the Home screen is displayed, press the wrench icon in the lower left of the screen

Then select the operation button
Select System Startup

Follow the on screen prompts for starting up the UPS.  As each option is performed it will highlight the next step.

Some options are automated and will be done for you.

The following video demonstrates this procedure:

Video: What causes an StF fault on an Altistart 22 Soft Starter?

Troubleshooting StF Fault on Altistart 22

Product Line:
ATS22 Soft Starter

All models

The StF fault means the starter has exceeded the maximum start time setting, tLS, in the SEt menu.  

tLS needs to be set higher than the ACC time.  
For example:  If ACC (ramp up time) is 10 seconds, then set the tLS max starting time to 20 seconds.

If ILt current limit is too low, the motor may not reach full speed within tLS limit.
Mechanical problems on the load may prevent the motor from reaching full speed within tLS limit.
See page 51 in the ATS22 User Manual:

The following video is a guide for troubleshooting the StF fault code, indicating a longer than expected start-up time, on the Altistart ATS22 soft starter by adjusting the tLS (maximum start time in seconds) and ACC (ramp up time) parameters under the SET menu. tLS must be set higher then the ACC time value.