MASTER YOUR CASTLE with your new build or reno project
Enter competition
Side Image of 31E2PUDM Integrally Switched 350W Push Button Universal Dimmer Mech

31E2PUDM

Light Dimmer, Universal, ISPB, 350VA, Series 30

Side Image of 31E2PUDM Integrally Switched 350W Push Button Universal Dimmer Mech
Colour: White Electric
Colour: Per UOM Std.
  • Black 1 PCE
  • White Electric 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
  • 30 series standard range
  • Leading edge/trailing edge phase control
  • Mounting center: 84 mm
  • 0 to 45 deg C
  • AS/NZS3100, AS/NZS3133, IEC60669
  • Compatible with selected dimmable CFL and LED loads
  • User selectable soft-start / kick-start operation
  • User adjustable minimum brightness
  • Multi-gang capacity up to six (6) dimmer mechanisms per plate
  • Wall or architrave mounting options
  • Wide range of plate styles and colour variants available
  • Suitable for new installations or retro-fit applications
  • Inbuilt over-current and over-temperature protection
  • Full short circuit protection
  • Fitted with suppressors to minimise radio frequency interference
  • Complies with Australian and international EMC standards
Range of product
  • Series 30
  • C-Thru
    • Product brand
      Clipsal
      Device presentation
      basic element
      Dimmer type
      universal
      Power consumption in W
      350 W
      [Ue] rated operational voltage
      250 V
      Network frequency
      50 Hz
      Function available
      with light value memory
      Control type
      button
      Actuator
      push-button
      Mounting support
      wall
      Standards
    • AS/NZS 3100
    • IEC 60669-2-1
    • AS/NZS 3133
    • IEC 60669
    • AS/NZS CISPR 15
    • IEC 61000-3-2
      • REACh Regulation
        Reference contains Substances of Very High Concern above the threshold
        EU RoHS Directive
        Pro-active compliance (Product out of EU RoHS legal scope)
        Environmental Disclosure
        ENVPEP111278EN_V0

        Frequently Asked Questions

        hide show

        Is part no 31E2PUDM available in Black?

        Yes the 31E2PUDM is available in Black

        Can 31E2PUDM be used with LED lights?

        Yes. Dimmer can be used for LED lighting.

        Can you wire the LED in the 31E2PUDM to be always on?

        NO, LED is hard wired into the circuitry.

        Does the 31E2PUDM have an LED indicator?

        Yes. It has a blue LED indicator which comes on when the load is ON and is off when the load is OFF. This configuration cannot be changed.

        For more information on this product range please visit the Clipsal web site on the link provided
        https://www.clipsal.com/Trade/search-results?q=31e2pudm

        Can 31E2PUDM be used to control the speed of fan?

        Yes. It can handle motor loads up to 350W

        31E2PUDM - do you need an extra switch with this?

        No - it's integrally switched.

         

        Is the Clipsal 31E2PUDM compatible with Inductive loads ?

        Yes. The pushbutton universal dimmer 31E2PUDM is compatible with Inductive loads  - 350 Watts Max.
        See the attached brochure for more detail.

        What is the part number for a push button dimmer that would suit the Saturn Communication plates?

        The 31E2PUDM-SG would suit the Saturn communications plate in the Standard colour choices in this range.
        Is not available to suit the Saturn Horizon range.

        Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail and check under the Documentation Tab for more information.

        Does the 31E2PUDM turn on and off?

        Yes, the 31E2PUDM does turn on and off as well as dim.

        Some of the key features are:
        • 30 series standard range
        • Leading edge/trailing edge phase control
        • Mounting center: 84 mm

        For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM
         

        Can 31E2PUDM be used to turn Off/On ?

        Yes. The 31E2PUDM can operate with Off/on function.
        Some of the key features are:
        • 30 series standard range
        • Leading edge/trailing edge phase control
        • Mounting center: 84 mm
        • 0 to 45 deg C
        • AS/NZS3100, AS/NZS3133, IEC60669
        • Compatible with selected dimmable CFL and LED loads
        • User selectable soft-start / kick-start operation
        • User adjustable minimum brightness
        • Multi-gang capacity up to six (6) dimmer mechanisms per plate
        • Wall or architrave mounting options
        • Wide range of plate styles and colour variants available
        • Suitable for new installations or retro-fit applications
        • Inbuilt over-current and over-temperature protection
        • Full short circuit protection
        • Fitted with suppressors to minimise radio frequency interference
        • Complies with Australian and international EMC standards
        For further information, please visit: https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM

         

        Does the 31E2PUDM-WE do 2-way dimming?

        Unfortunately this does not do 2 way dimming.
        We do not have a push button dimmer in our range which does at this time.
        If you want 2 way dimming, you need to use a 32e450udm and a 30m series mechanism which will only give you a dimmer on one side of your 2 way switching.

        Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail and check under the Documentation Tab for more information.

        Can a 31E2PUDM be used to control a ceiling fan? be used to control a ceiling fan?

        Yes, the 31E2PUDM can be used to control small motors such as ceiling fans or exhaust fans.

        Is there a Push Button Dimmer available in black in the Clipsal 30 Series?

        Yes, the 31E2PUDM is available in black. This item is not a stocked item but it can be ordered in.

        Please visit this link for more information - https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM

        Product code: 31E2PUDM-BK

        Does the 31E2PUDM-WE do two way dimming.

        PUDM is not appropriate for two way. Can only have a dimmer on one end. That dimmer must be a rotary non-intergrated, in-line with a standard switch 32e450udm and a 30m mechanism.
        Please see brochure for entire range of pushbutton dimmers and features.
        https://updates.clipsal.com/ClipsalOnline/Files/Brochures/A0000258.pdf

        Can you obtain a 31E2PUDM without an LED indicator ?

        No , as it is an electronic dimmer mechanism which is integrally switched there is a requirement to have an LED indicator to indicate light status.
        The configuration of the LED Indicator cannot be modified.
        For more information on this product range please visit the Clipsal web site on the link provided
        https://www.clipsal.com/Trade/search-results?q=31e2pudm

        What are the characteristics of a 4061E2PUDM-TR?

        The 4061E2PUDM-TR has the function of a push button switch as well as a rotary dimmer all rolled into one which is a great space saver for the Saturn series.
        This is also available in all of our ranges from the standard series to slimline.
        The part number for the mechanism only for these series is 31E2PUDM.
         
        Please go to the web site via the following link www.clipsal.com/Trade/search-results and check under the Documentation Tab for more information.
         

        What is an Impress dimmer?

        The Impress dimmer is a push button dimmer designed to complement our Impress series of switch mechs . It is special in that it does not require a separate mechanism to switch on the circuit as it is integrally switched incorporating ON/OFF and Dimming control . The part number for the Impress Dimmer is 31E2PUDM
        For more information regarding either Impress or Dimmers please visit the Clipsal web site on the links provided
        https://www.clipsal.com/Trade/search-results?q=31e2pudm
        https://www.clipsal.com/Trade/search-results?q=Impress
        https://www.clipsal.com/Trade/search-results?q=dimmers

         

        Can the dimmer 31E2PUDM be used in two way operation?

        No, unfortunately it is only suitable for one way operation.
        Some of its key features are:
        • 30 series standard range
        • Leading edge/trailing edge phase control
        • Mounting center: 84 mm
        • 0 to 45 deg C
        • AS/NZS3100, AS/NZS3133, IEC60669
        • <
        • Compatible with selected dimmable CFL and LED loads
        • User selectable soft-start / kick-start operation
        • User adjustable minimum brightness
        • Multi-gang capacity up to six (6) dimmer mechanisms per plate
        • Wall or architrave mounting options
        • Wide range of plate styles and colour variants available
        • Suitable for new installations or retro-fit applications
        • Inbuilt over-current and over-temperature protection
        • Full short circuit protection
        • Fitted with suppressors to minimise radio frequency interference
        • Complies with Australian and international EMC standards
        For further information on this product please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM