Yes, the 30PID
will fit in any plate that takes a 30 series mechanism.
Some of the key features are:
- For 30 series ID circuit plug
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PID
The Part number for the lens is a 30PID-2-CL
Not specifically like the Classic series, they will need to use circuit ID mechs 30PID.
The part name is 2025XAPID-WE
The shroud to suit the 30PB is the 90FS-BK.
No. unfortunately, part number 30PBI is not available in Black.
The 30PB is available in both black and white.
30PBI is not available with an LED
No we don't have a keystone to 30 series mech adapter.
The 30PRJ is specifically designed for Commscope Products and does not fit Keystone jacks.
Part codes which are available in 3S - 30M, 30USM, 30MI, 30MD, 30MBPR, 30M35, 32E450UDM, 32E450LM, 32E450TM
The part number for 30 pair underground phone cable is 2T30POJPP4.
30PBI is the 30 series intermediate mechanism. This does not have an LED indicator.
No it does not.
30PBI - Push-button Impress Series, No LED Indication, 250V 10AX - Intermediate Push-button.
No, the 30PBI is not available in Black as a standard item. However, it can be created as MTO ( made to order ) custom special.
Not available as complete. Use 2 x 30PFM and a 2 gang plate
Part codes you need to use SC2032VH + 30PBL + 38TB
Use a 4032VH + 38TB + 30PBL - not one touch but closest match
No it isn't but the 30PBBP is
YES, they also fit into the Clipsal Classic C2000 Series, Clipsal Standard Series and into the Saturn Series custom Grid and Plates to suit 30 Series mechanisms.
Unfortunately not, 30PB or 30PBL are switch mechanisms which can be used for ON/OFF. They cannot be used for dimming lights.
is 30 series Standard Range universal push button dimmer mechanism, 250V 350W, that can be used for On / Off and dimming the lights. These are designed for
one-way operation only.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM
The parts you need is 60PBL if the 406* plates are used and a 30PBL if the 403* plates are used
No colour choice for the LED indicators on 30PBL. The indicators are blue in colour on the 30PBL.
The 30PRJ is our keystone adaptor clip. It is available in WE and BK as standard. Other colours maybe possible as a special.
It is known as the Rapid Commissioning User Interface or Rapid Configuration Tool, it is used for setting the C-Bus Indoor Passive Infrared Occupancy Detector unit to carry out basic sensing operations. It is supported only by the sensor firmware version 2.3.0 and above.
60PBI is the Saturn intermediate mechanism. This does not have an LED indicator.
Schneider Electric 3-wire serial cable p/n TBUM297801 is used to connect from an 3-pin based RS-232 port on the SCADAPack 4000 series Transmitter (4012, 4032, 4102, 4203DR, 4203DS) to DE-9P connector on a DTE such as a PC.
NO. The rapid spanning tree protocol and settings are established and configured at the ethernet switch.
Legacy KB System (APS) Data: RESL180351 V1.0, Originally authored by DaSo on 10/17/2006, Last Edited by DaSo on 10/17/2006
Related ranges: Modicon Quantum
No. We have 10A intermediate switch , 30MI (standard type) & 60PBI(for Saturn)
For more information on intermediate switched please visit the Clipsal web site on the link provided https://www.clipsal.com/Trade/search-results?q=30mi
Yes the 30PBL can be wired up so the LED will work. Unfortunately without a neutral there is only one method of wiring which will have the LED on permanently until the light is switched on then the LED will turn off. It is strongly Suggest you speak to you electrician as he will have the appropriate skills to achieve the function of the LED's.
Some of the key features are:
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PBL
- Blue LED indicator
- One way/two way switching facility with loop terminal
- Retrofit option in to any 30 series aperture
- Suitable for fluorescent loads Up to 16AX
- Shrouded in-line Terminals provide protection during installation
No. The ConneXium Managed Switch only supports the HIPER-Ring, Spanning Tree and Rapid Spanning Tree protocol for Redundancy over fiber.
It is available on Toolkit 1.14.0 and later version
Not directly , to use the Saturn series with Phone / Data mechanisms etc the Saturn communication plates are required. These are compatible with the 30 series data and telephone mechanisms.
For more information on both Saturn and 30 series please visit the Clipsal web site on the links provided
Absence detection sets the sensor to detect the absence of motion. If the lighting is on and the sensor detects the absence of motion, a timer is activated. When the timer expires and the sensor element still detects absence, a C-Bus command is sent to control lighting.
This video will step through Program “Absence Detection” using Rapid Configuration, it will cover those C-Bus sensors, 5753L and 5753PEIRL.
5753L and 5753PEIRL
C-Bus Sensors: C-Bus Toolkit 1.15.2
Double click the sensor to open its GUI in Rapid
Select “Absence Detection” and click “Next”
Select a group from “Group” dropdown list
Define the Expiry Time (5 minutes assigned by default)
Click “Apply” or “Save & Close”
RSTP is Rapid Spanning Tree Protocol. This protocol shortens the timers required to reconfigure an OSI Layer 2 network to locate a path after an existing path has failed. Standard STP (Spanning Tree Protocol) can take up to 60 seconds to perform such a recovery. RSTP improves on that recovery time.
Legacy KB System (APS) Data: RESL174612 V1.0, Originally authored by on , Last Edited by on
Related ranges: Other programming software
A rapid flash on the ACTIVE LED of the AS-B875-111 indicates the unit is in the process of initialization. A slow flash on the ACTIVE LED of the AS-B875-111 indicates that at least one input is out of range.
It uses Day Move function only; it triggers a Lighting Type group ON when movement at Day occurs, above the light threshold.