Quantcast

Acti 9 Busbar Tooth Covers for Duoline, 2 Set of 12 Comb, Clario, Librio, Prodis

Back to Comb Busbar up to 100A Home Acti 9 System Comb Busbar up to 100A

Acti 9 Busbar Tooth Covers for Duoline, 2 Set of 12 Comb, Clario, Librio, Prodis

Acti 9 Busbar Tooth Covers for Duoline, 2 Set of 12 Comb, Clario, Librio, Prodis

Item Number: 21096

Retail
N/A
RRP (Inc. GST)
Where To Buy

Datasheet

Download

Barcode

Qty UoM EAN Colour
-
-
-
See all

Specifications

Design

Range of product

  • ProDis
  • DuoLine
  • Clario
  • Librio

      • Range

      Acti 9

      Product or component type

      comb busbar tooth cover

      Product compatibility

    • C40
    • ID'clic
    • DT60
    • iDPN
    • D'clic Vigi
    • D'clicXE
    • R'clicXE
    • DT40

        • Market segment

        small commercial

        Warranty

        18 months

        Physical

        Quantity per set

        set of 12

        Range compatibility

      • Multi 9 N40 N40N comb busbar
      • Multi 9 N40 Vigi N40 Vigi comb busbar

          • Device presentation

          cuttable

          REACh Regulation

          Free of Substances of Very High Concern above the threshold

          REACh free of SVHC

          Yes

          EU RoHS Directive

          Pro-active compliance (Product out of EU RoHS legal scope)

          Toxic heavy metal free

          Yes

          Mercury free

          Yes

          RoHS exemption information

          Yes

          China RoHS Regulation

           Pro-active China RoHS declaration (out of China RoHS legal scope)

          Others

          Product name

          Linergy FH

          Accessory / separate part category

          insulation accessory

          Distribution type

        • 3 L
        • N + L1
        • N + 3 L

            • Unit Type of Package 1

            PCE

            Number of Units in Package 1

            1

            Package 1 Weight

            54 g

            Package 1 Height

            3.5 cm

            Package 1 width

            12 cm

            Package 1 Length

            18 cm

            Unit Type of Package 2

            BB1

            Number of Units in Package 2

            10

            Package 2 Weight

            559 g

            Package 2 Height

            30 cm

            Package 2 width

            12 cm

            Package 2 Length

            23 cm

            Unit Type of Package 3

            S03

            Number of Units in Package 3

            80

            Package 3 Weight

            4.716 kg

            Package 3 Height

            30 cm

            Package 3 width

            30 cm

            Package 3 Length

            40 cm
            Show all specifications

            Frequently Asked Questions

            hide show

            What is the part code for a RCBO 4P 32Amp C-curve

             Combine a mccb 25016 32Amp C-curve with a 23382 rccb = RCBO

            What is the Clipsal 5470

            This is a keyless entry system that Clipsal used to sell until approximately 2009. The key cards used for this are no longer available but work off of 134.2KHz frequency.

            This was a product was supplied to Clipsal by Axeze. 

            https://www.axeze.com.au/products/readers/keyless-entry

            What are the Voltage tolerances for the 230-240Vac controlled iCT contactors?

            iCT contactors conform to IEC 61095 std and the tolerance of the rated control voltage is -15% and +10% according § 8.2.1.2.

             

            For example, for the iCT ref.A9C20732 the rated control voltage range is 230...240Vac so the lower limit is 230*0.85=195.5Vac and the upper limit is 240*1.1=264Vac

            What is the power terminal lug data for the LC1D40, LC1D50, LC1D65, LP1D40, LP1D50, and LP1D65 contactor?

            Issue:
            Identifying power terminal lug data for the D2 style contactors

            Product Line:
            IEC Contactors and Starters

            Environment:
            Tesys D line contactors

            Cause:
            Power terminal lug data required

            Resolution:
            For contactors with screw clamp terminals:
            stranded cable w/o cable end : One #10-3 AWG or Two #10-4 AWG per terminal.
            stranded cable w/cable end: One #10-4 AWG or Two #12-2 AWG per terminal.
            solid cable: One #10-3 AWG or Two #10-6 AWG per terminal.

            Does third party equipment exist to test the AFCI to determine that it is functioning properly?

            Product Line:
            Arc Fault Circuit Breakers

            Resolution:
            No. So-called AFCI testers are on the market, but they are not UL listed for testing the function of a CAFI/AFI circuit breaker. UL 1436 refers to them as "indicators" rather than testers, and Square D does not endorse them or recommend their use. They are subject to error in the form of giving a false negative result.

            The UL approved method of testing an AFCI circuit breaker is to press the push-to-test button when installed in an energized load center or panel. This test injects a signal into the AFCI sensor that looks like an arc to the AFCI. A properly functioning AFCI will trip when the test button is pushed as long as the panel is energized and the neutral pigtail/plug on neutral connection is made to the neutral bar.

            Paragraph 31.8.1 of the UL 1436 standard requires the AFCI indicator markings or instructions to effectively state that the test button on the AFCI circuit breaker demonstrates proper operation.
             

            What is one way to tell if a drive or Softstarter is still under Standard warranty?

            Issue:
            Standard warranty for a Drive or Softstarter.
             
            Product Line:
            Altistart, Altivar

            Environment:
            All
             
            Cause:
            NA
             
            Resolution:
            The date of purchase indicated on the distributors invoice or receipt can be used to determine if the drive or a Softstarter is in warranty. The standard warranty is 18 months.  If no receipt or invoice is available, the date code of the drive can be used to determine if the drive is in warranty.  This date code is imbedded into the Serial number that is located on the right side label of the unit below the bar code. The first 2 digits indicate the manufacturing plant.  The next two digits indicate the last two numbers of the year it was manufactured and the next two digits indicate the week of that year.  The following numbers indicate the sequence of drive. 
             example:  8B 092124041 (8B = manufacturing location, 09 = year 2009, 21 = week).  The warranty ends November of 2010 (18 months from May 2009).