Quantcast

Standard Series, Single Switch Socket Outlet, 250V, 10A, Standard Size, Indicator

Back to Single Switched Socket Home Switched Horizontal Single Switched Socket

White Electric | Standard Series, Single Switch Socket Outlet, 250V, 10A, Standard Size, Indicator

Standard Series, Single Switch Socket Outlet, 250V, 10A, Standard Size, Indicator

Item Number: 15N-WE

Where To Buy

Datasheet

Download

Barcode

Qty UoM EAN Colour
-
-
-
See all

Specifications

Design

Range of product

Standard Series

Product or component type

switched socket

Product brand

Clipsal

Surface finish

glossy

Sustainable offer status

Green Premium product

Physical

Control type

ON/OFF button

Number of gangs

1 gang

Pin number

3

Number of power socket outlets

1

Actuator

  • rocker
  • switch

Fixing mode

by screws

Local signalling

indicator light

Mounting position

horizontal

[Ue] rated operational voltage

250 V AC

[In] rated current

10 A

Depth

14 mm

Length

115 mm

Width

73 mm

Fixing center

84 mm

Standards

  • AS/NZS 3100
  • AS/NZS 3112
  • AS/NZS 3133
  • AS/NZS 3000:approval number S/1

REACh Regulation

Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive

Compliant

Mercury free

Yes

China RoHS Regulation

Product out of China RoHS scope. Substance declaration for your information

RoHS exemption information

Yes

Environmental Disclosure

ENVPEP120506EN

Material

Material

PC (polycarbonate)

Others

Package 1 Bare Product Quantity

1

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

1.4 cm

Package 1 Width

7.3 cm

Package 1 Length

11.5 cm

Package 1 Weight

0.09 kg

Unit Type of Package 2

BB1

Number of Units in Package 2

5

Package 2 Height

11.7 cm

Package 2 Width

10.2 cm

Package 2 Length

13.8 cm

Package 2 Weight

450 g

Unit Type of Package 3

CAR

Number of Units in Package 3

50

Package 3 Height

15.7 cm

Package 3 Width

30.5 cm

Package 3 Length

44.5 cm

Package 3 Weight

4.5 kg
Show all specifications

Frequently Asked Questions

hide show

What is the replacement power terminal block for the ATV71HD15N4

Issue:
Terminal block replacement for the ATV71HD15N4

Product Line: 
ATV71, Altivar 71

Environment:
All serial numbers

Cause: 
Damaged power terminals

Resolution:
VZ3N1205 is the replacement Power terminal block with replacement stickers.

What color is the VW3A31817 conduit kit?

Issue:
Looking for the color of the VW3A31817 conduit kit.
 
Product Line:
ATV212

Environment:
ATV212HD11M3X, ATV212HD15M3X, ATV212HD18M3X, ATV212HD15N4, ATV212HD18N4, ATV212HD22N4S
 
Cause:
2 colors shown in documentation

Resolution:
Gold colored conduit kit contained a yellow chomemate material that was not Rohs compliant approximately  2004/2005. We changed to the current color silver color, as a result.

Does Schneider offer a din rail mounting kit for an ATV212HD15N4?

Issue:
Rail mounting kit availability for an ATV212HD15N4.

Product Line:
ATV212, Altivar 212 Altivar buildings

Environment:
Altivar 212H075M3X...U22M3X
Altivar 212H075N4...U22N4

Cause:
Din rail mounting inside a panel.

Resolution:
There is no DIN rail mounting kit for the ATV212HD15N4.
The DIN rail mounting kit part number VW3A31852 is for installation on 35 mm wide DIN rail that are available only for:  Altivar 212H075M3X...U22M3X and Altivar 212H075N4...U22N4, the smaller HP sized drives.

What is the part number of the Main Control board for ATV71HD22N4?

Issue:
ATV71HD22N4:  Need to replace the Main Control board.

Product Line:
ATV71

Environment:
ATV71HO75N4, ATV71HU15N4, ATV71HU22N4, ATV71HU30N4, ATV71HU40N4, ATV71HU55N4, ATV71HU75N4, ATV71HD11N4, ATV71HD15N4, ATV71HD18N4, ATV71HD22N4, ATV71HD30N4, ATV71HD37N4, ATV71HD45N4, ATV71HD55N4, ATV71HD75N4

Cause:
Need the Main Control board part number.

Resolution:
The Main Control board part number for these drive is VX4A71100Y

Video: How do I calibrate the Analog Output (FM) on the ATV212 drive?

Issue:
Scale the Analog Output (FM) on the ATV212 drive.

Product Line:
ATV212
S-Flex

Environment:
All models and serial numbers.

Resolution:
When using voltage (0-10Vdc) connect your load prior to calibration.  When using current (4-20mA) connect the load after calibration.
 
If you want to follow OUTPUT CURRENT (FMSL = 1)
4-20mA (no load)
  1. Set DIP switch FM (SW101) to "I" (left)
  2. Set F692 for 20 (20% of 20mA = 4mA)
  3. Set FMSL to 15 
  4. Go to parameter FM and enter
  5. Connect the current meter to terminals FM and CC
  6. Press the UP and DOWN arrows until meter reads desired 100% (20mA)
  7. Press enter to lock in the scale
  8. Set FMSL = 1 to follow motor current
0-10Vdc (connect the load)
  1. Set DIP switch FM (SW101) to "U" (right)
  2. Set F692 to 0 (0% of 10V = 0V)
  3. Set FMSL to 15
  4. Go to parameter FM and enter
  5. Connect the volt meter to terminals FM and CC
  6. Press the UP and DOWN arrows until meter reads desired 100% (10Vdc)
  7. Press enter to lock in the scale
  8. Set FMSL = 1 to follow motor current
ALL OTHER analog output functions (FMSL = 0,2,3 - 18)
4-20mA (no load)
  1. Set DIP switch FM (SW101) to "I" (left)
  2. Set F692 for 20 (20% of 20mA = 4mA)
  3. Set FMSL to 17
  4. Go to the FM parameter and enter
  5. Connect the current meter to terminals FM and CC
  6. Press the UP and DOWN arrows until meter reads desired 100% (20mA)
  7. Press enter to lock in the scale
  8. Set FMSL back to the analog output function you want to follow  per the table below.
​0-10Vdc (connect the load)
1. Set DIP switch FM (SW101) to "U" (right)
2. Set F692 to 0 (0% of 10V = 0V)
3. Set FMSL to 17 
4. Go to parameter FM and enter
5. Connect the meter between terminals FM and CC
6. Press the UP and DOWN arrows until meter reads desired 100% (10Vdc)
7. Press enter to lock in the scale
8. Set FMSL back to the analog output function you want to follow, per the table attached.

Note:  Calibration can also be performed using the VW3A1101 remote keypad.  Turn the knob clockwise instead of using the up arrow and turn counter clockwise instead of  using the down arrow.

 



 

How do you distribute MAXBAR from the main row to other rows, keeping the system more professional?

MAXBAR with neutral terminal block can be used to distribute active and neutral in the row with main switch. Use the connectors provided with MAXBAR to take active and neutral feed from the row with main switch to take the feed to other rows. You can follow the same process for other rows in switchboard.

MAXBAR Kit Definition
 
Show More