Specifications
Design
Range of product
Range
Product or component type
Device application
- basic energy metering E
- improved load monitoring E, U, I, P, Pf
- load alarming
- load control
- breaker status monitoring
Physical
Protection type
- short-circuit protection for analog input
- against reverse polarity for auxiliary supply
- against reverse polarity for input
- overvoltage at 33 V DC for digital output
Inrush current
- 0.5 A for digital output
- 3 A for power supply
Local signalling
- communication: 1 LED (yellow)
- NS (Network Status): 1 LED (green, orange and red)
- communication (LK/ACT 10/100): 1 LED (green and yellow)
- status: 1 LED (green, orange and red)
Mounting position
Connections - terminals
- spring-loaded terminal Ti24 qty: 7 for digital input/output, ordered separately
- RJ45 connector qty: 1 for ETHERNET, ordered separately
- plug-in connector qty: 1 for supply circuit
- plug-in connector qty: 1 for communication bus
- plug-in connector qty: 1 for analog input
Clamping connection capacity
- 2 x 0.25 mm² for twisted shielded pairs cable, flexible with cable end for communication bus
- 2 x 0.25 mm² for twisted shielded pairs cable, flexible without cable end for communication bus
- 2 x 0.25 mm² for twisted shielded pairs cable, rigid with cable end for communication bus
- 2 x 0.25 mm² for twisted shielded pairs cable, rigid without cable end for communication bus
- 2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, rigid with cable end for analog input
- 2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, rigid without cable end for analog input
- 2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, flexible with cable end for analog input
- 2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, flexible without cable end for analog input
- 1 x 0.5...1 x 1.5 mm², flexible with cable end for control
- 1 x 0.5...1 x 1.5 mm², flexible without cable end for control
- 1 x 0.5...1 x 1.5 mm², rigid with cable end for control
- 1 x 0.5...1 x 1.5 mm², rigid without cable end for control
- 2 x 0.2...2 x 1.5 mm², flexible with cable end for supply circuit
- 2 x 0.2...2 x 1.5 mm², flexible without cable end for supply circuit
- 2 x 0.2...2 x 1.5 mm², rigid with cable end for supply circuit
- 2 x 0.2...2 x 1.5 mm², rigid without cable end for supply circuit
Wire stripping length
- control: 10 mm
- supply circuit: 7 mm
- analog input: 7 mm
- communication bus: 7 mm
Communication network type
- RS485 Modbus RTU master SUB-D 9 9.6...19.2 kbauds
- Ethernet Modbus TCP/IP server RJ45 10/100 Mbit/s
Height
Width
Depth
Net weight
Provided equipment
- set of 1 connector
- set of 1 power supply connector
- set of 1 bus connector
- set of 2 locking clips
Range compatibility
- Acti 9 iTL auxiliary
- Multi9 C60
- Linergy Linergy FM
- Acti 9 iOF+SD 24
- Acti 9 iACT24
- Acti 9 iATL24
- PowerLogic pulse output meter
- PowerLogic Modbus meter
- Acti 9 PowerTag wireless energy sensor
- Acti 9 RCA iC60
- Acti 9 Acti9 iCT auxiliary
- Acti 9 Acti9 iC60
- Acti 9 Acti9 iID
- Acti 9 Acti9 iSW-NA
- Acti 9 Acti9 iDPN Vigi
- Acti 9 Acti9 C40
- Acti 9 Acti9 DT40
- Acti 9 Acti9 DT60
- Acti 9 Acti9 I-NA
- Acti 9 Acti9 ITG40
- Acti 9 Acti9 iDPN
- Acti 9 Acti9 Reflex iC60 Ti24 connector
Ip degree of protection
Environmental characteristic
- salt mist 2 conforming to IEC 60068-2-52
- corrosive 3C2 conforming to IEC 60721-3-3
Relative humidity
Ambient air temperature for operation
Ambient air temperature for storage
Reach regulation
Eu rohs directive
Mercury free
Rohs exemption information
China rohs regulation
Environmental disclosure
Circularity profile
Others
Commercial status history
- SESA301466
- Mon Jul 15 20:52:00 EDT 2024
- From Unitary Local
- From 18 to 16
Package 1 bare product quantity
Package 2 bare product quantity
Product name
Device short name
Connected auxiliaries
- up to 7 wired devices
- up to 20 wireless devices
Group of channels
- 1 group of 7 digital channels
- 1 group of 1 analog channel
Maximum supply current
[us] rated supply voltage
Connectivity to devices
- analog input
- digital input and output
- pulse output meter
- wireless energy sensor
Communication service
- Ethernet Modbus TCP/IP server
- web server
Web server
- BMS controller compatible
- embedded web page
Transmission support medium
Web services
Application specific i/o
- pulse converter
- pulse totalising counter
Immunity to microbreaks
Reset
Input/output type
- 2 inputs per analog channel
- 2 inputs + 1 output per digital channel
Input type
- current for analog input, 4...20 mA
- voltage for analog input, 0...10 V DC
- current sink for digital input, 24 V DC +/- 20 % at 2.5 mA
Maximum permanent current
Absolute accuracy error
Electronic filtering time
- 2 ms for digital input from state 0 to state 1
- 2 ms for analog input from state 0 to state 1
Output type
Maximum voltage drop
Location of connection
9 mm pitches
Commissioning interface
- ECOREACH
- web page
Compatibility code
Pollution degree
Electromagnetic compatibility
- resistance to electrostatic discharge (air discharge), 8 kV, conforming to IEC 61000-4-2
- resistance to electrostatic discharge (contact discharge), 4 kV, conforming to IEC 61000-4-2
- resistance to radiated electromagnetic fields (80 MHz...3 GHz), 10 V/m, conforming to IEC 61000-4-3
- power supply: resistance to fast transient (5...100 kHz), 2 kV, conforming to IEC 61000-4-4
- input/output: resistance to fast transient, 1 kV, conforming to IEC 61000-4-4
- communication bus: resistance to fast transient, 1 kV, conforming to IEC 61000-4-4
- conducted EMC (0.15...80 MHz), 10 V, conforming to IEC 61000-4-6
- immunity to magnetic fields at network frequency, 30 A/m, conforming to IEC 61000-4-8
- radiated emission (30...1000 MHz), class A, conforming to IEC 61131-3 Ed.3
- conducted emission (0.15...30 MHz), class A, conforming to IEC 61131-2
Vibration resistance
Shock resistance
Fire resistance
- other parts: 650 °C ( 30 s ) conforming to IEC 60695-2-10
- on connection terminals: 960 °C ( 30 s ) conforming to IEC 60695-2-10
Tropicalisation
Operating altitude
Unit type of package 1
Number of units in package 1
Package 1 height
Package 1 width
Package 1 length
Package 1 weight
Unit type of package 2
Number of units in package 2
Package 2 height
Package 2 width
Package 2 length
Package 2 weight
Scip number
Product contributes to saved and avoided emissions
Documents & downloads
hide show-
All
-
CAD Files and Packs
-
End of Life Manual
-
Environmental Disclosure
-
Installation Instruction
-
Operating Manuals
-
Application Notes
-
Declaration of Conformity
-
Firmware - History, Utility & Others
Frequently Asked Questions
How do you change the Modbus device number on the master Smartlink SI B controller (either in the web page or through the EcoStruxure Power Commission software) from 255 to a lower number?
Hide ShowChange the Modbus device number on the master Smartlink SI B controller from 255 to a lower number
Product Line:
Acti 9 Smartlink
Environment:
Smartlink SI B
Resolution:
The Smartlink SI B (A9XMZA08) has a fixed Modbus Address of 255, it is not possible to change it.
The Smartlink - Modbus RS485 slave (A9XMSB11) address can be configure in the range of 1 to 99. You can set the address adjusting the two thumbwheels:
-The left-hand thumbwheel sets the tens.
-The right-hand thumbwheel sets the units.
Smartlink SI B (A9XMZA08) user guide:
https://download.schneider-electric.com/files?p_Doc_Ref=DOCA0004EN&p_enDocType=User+guide&p_File_Name=DOCA0004EN-06.pdf