Cart
Back
Menu Surface Mount Flush Mount Accessories
View Smoke Alarms range
Clipsal Iconic Smoke Alarms


Smoke Alarms

Clipsal by Schneider Electric offer a wide range of photoelectric smoke alarms and accessories for complete protection in every home.

These smoke alarms offer easy installation, maintenance, and subtle design to compliment any interior decor. The Clipsal Fire Tek® smoke alarms are one of few to also carry the 5 Ticks Mark product certification, provide you peace of mind.

Flush Mount 240V alarm
Unique extra low profile unobtrusive flush design

Surface mount 240V Alarms
9VDC or rechargeable Lithium backup options

Lithium Battery Alarm
Sealed-in Lithium battery lasts 10 years, with built-in wireless interconnection

Accessories
Wirelessly interconnect, connection to other devices and systems or remotely test/hush your alarm.

Surface Mount Smoke Alarms

Lithium Battery Powered Photoelectric Smoke Alarm

The 755LPSMA4 smoke alarm is powered from a sealed-in lithium battery which lasts 10 years, so no need to replace batteries. The alarm has built-in wireless interconnection and can also connect to the 240V mains surface mount alarms via a 755RFB2 wireless smoke alarm base providing full protection in every home.

Watch video.

Feature & benefits of the Photoelectric Alarm

Lithium power: Sealed-in lithium battery providing power for the life of the alarm (10 years)

Photoelectric technology: Detection of smouldering fires, the most common fire type in the home.

Interconnection: Built-in wireless interconnection for up to 40 units or up to 40 755RFB2 wireless mounting bases.

Modern design: Low profile modern styling suits any decor

Tamper-proof base: Simple to install tamper-proof mounting base, ideal for tenanted properties.

Easy to use: Large Test/Hush button makes test/hush and wireless pairing simple.

755PSMA4 Smoke_Alarms

Mains Powered Photoelectric Smoke Alarm, Gen 4

The 755PSMA4 Photoelectric Smoke Alarm provides surface mounted smoke protection including a replaceable 9V d.c. battery. It can be used as a single mains powered, battery backed alarm or alternatively connected with other 755 Series Smoke Alarms to give total home protection.

Download brochure (PDF, 3652KB)

Features & Benefits of the Smoke Alarm, Gen 4

Photoelectric technology :  Detection of smouldering fires, the most common fire type in the home

Dual Power Sources :  220-240 V AC mains powered with 9V DC battery backup

Extensive interconnection :  Hard-wired with 40 units or wireless with up to 20 units (if using 755RFB base)

Flip Down Design :  Hinged cover allows for easy access to terminals and backup battery

Quality chamber design :  PC screen mitigates insect ingress for top performance

Robust Design :  New digital design for superior performance and resilience

Easy retrofit  :  Compatible with the Clipsal 755PSMA/2, 755RLPSMA2 and 755SMA mounting bases

Australian compliance :  Certified to AS3786:2014 (ActivFire Listed and SAI Global 5 Ticks Mark)

755RLPSMA4_ALARMS

Mains Powered Photoelectric Smoke Alarm, Rechargeable

The 755RLPSMA4 Photoelectric Smoke Alarm is surface mounted featuring a sealed in rechargeable lithium battery. It can be used as a single mains powered, battery backed alarm or alternatively connected with other 755 Series Smoke Alarms to give total home protection.

Download brochure (PDF, 3652KB)

Feature & benefits of the Rechargeable Alarm

Photoelectric technology :  Detection of smouldering fires, the most common fire type in the home

Extensive interconnection :  Hard-wired with 40 units or wireless with up to 20 units (if using 755RFB base)

Rechargeable lithium battery :  Back up battery does not need to be replaced annually

Flip Down Design :  Hinged cover allows for easy access to terminals and backup battery

Quality sensing chamber design :  PC screen mitigates insect ingress for top performance

Robust Design :  New digital design for superior performance and resilience 

Easy retrofit  :  Compatible with the Clipsal 755PSMA/2, 755RLPSMA2 and 755SMA mounting bases

Australian compliance :  Certified to AS3786:2014 (ActivFire Listed and SAI Global 5 Ticks Mark)

Flush Mount Smoke Alarms

755PFM4_Flush_Mount

Mains Powered Photoelectric Flush Mount Smoke Alarm, Gen 4

The 755PFM4 Photoelectric Smoke Alarm is flush mounted for a subtle, low profile addition to the room. It can be used as a single mains powered, battery backed alarm or alternatively connected with other 755 Series Smoke Alarms to give total home protection.

Feature & Benefits of the Flush Mount Alarm

Photoelectric technology :  Detection of smoldering fire, the most common fire type

Stylish low profile :  Flush model is 60% smaller and 40% thinner than regular smoke alarms

Easy installation :  Mounting base mere 90mm cut out with large wiring terminals

Extensive interconnection :  Hard-wired with up to 40 units for added safety

Quality chamber design :  Stainless steel screen mitigates insect ingress for top performance

Dual Power Sources :  220-240 V AC mains powered with 9V DC battery backup

Australian compliance :  Certified to AS3786:2014 (ActivFire Listed and SAI Global 5 Ticks Mark)

Accessories Smoke Alarms

755RB_Accessories_smoke_alarm

Smoke Alarm Mounting Base with Integrated Relay

The 755RB Mounting Base is an optional accessory for the 755PSMA2/4 or 755RLPSMA2/4 Smoke Alarms to offer connection with third party devices such as lights, sirens and home automation. 

Feature & benefits of the Integrated Relay

Third party integration :  Connect lights, security and home automation for added home safety

Flexible connetion options :  Voltage free, changeover relay contact isolated and segregated from mains

Dry contact input :  Enables remote Test/ Hush operation from a momentary switch

Flexible configuration :  Relay can operate from the local alarm or any interconnected alarm

Mains powered :  Powered by 220-240 V a.c., 50Hz

Complete interconnectivity :  Interconnect up to 40 hardwired units

Flexible use :  Suitable for use with models 755PSMA2, 755RLPSMA2,  755PSMA4 and 755RLPSMA4

755RFB2_Accessories_smoke_alarm

Smoke Alarm Mounting Base with Wireless Interconnect

The 755RFB2 Mounting base is an optional accessory for the 755PSMA2/4 or 755RLPSMA2/4 smoke alarms to offer wireless linking capabilities. The base is also compatible with the 755LPSMA4 lithium battery alarm providing flexibility and full home protection. In the case of fire, all linked units will activate.

Feature & benefits of the Wireless Alarm

Simple interconnectivity :  Interconnect up to 40 units. Suitable for mixed wired and wireless interconnection.

Dry contact input :  Enables remote Test/ Hush operation from a momentary switch

Rechargeable backup :  Battery will allow wireless linking to operate during mains power outage

Simple Pairing: Wireless pairing is simple by using the test button on the side of the base.

Dual power sources :  220-240 V AC mains powered with rechargeable lithium battery backup

Flexible use :  Suitable for use with models 755PSMA2, 755RLPSMA2,  755PSMA4 and 755RLPSMA4

Full home protection: Can be wirelessly interconnected to the 755LPSMA4 lithium battery powered alarm providing solutions for all homes.

756_Accessories_smoke_alarm

Smoke Alarm Isolation Relay Unit

The 756 Smoke Alarm Isolation unit connects to the 755 Smoke Alarms to activate external sirens, strobes, security systems or lighting in the case of fire.

Feature & Benefits of the Isolation Relay

Added home safety :  Link lighting, security systems or strobes to switch on in case of fire detection

Isolated voltage free relay contacts :  Allows auxiliary devices to be activated when alarm triggers

Mains Power Independent :  When Alarm is activated, Isolation Unit derives power from Smoke alarm in absence of mains power

Dual Changeover Contacts :  One Normally Open (N.O.) and One Normally Close (N.C.)

Extensive interconnection :  Interconnect up to 40 Smokes Alarms to one Isolation Unit

Flexible use :  Suitable for use with all 755 Smoke Alarms.

View the Clipsal smoke alarm range

Browse Catalogue