Frequently asked questions
How to properly select location and mounting of daligateway2 (5502CDGP230)
FAQ000241061
20 June 2025
The C-Bus DALI-2 Gateway is designed to be installed in a distribution cabinet, mounted on a DIN rail (type DIN EN60715), in a horizontal position.
There should be adequate ventilation to prevent overheating of this unit, this can be achieved by using larger distribution boards as opposed to small domestic distribution boards.
C-Bus Cat-5e cables Should be adequately separated or segregated as defined in local wiring regulations.
Note: Use the heat load value of all the units in the cabinet to select a cabinet with correct ventilation. Ensure that the temperature around the unit is less than 45C.