Quantcast

Video: Program "Absence Detection" on C-Bus outdoor PIR sensor

FA380638

15 April 2021

Video: Program "Absence Detection" on C-Bus outdoor PIR sensor

Objective:
Absence detection sets the sensor to detect the absence of motion. If the lighting is on and the sensor detects the absence of motion, a timer is activated. When the timer expires and the sensor element still detects absence, a C-Bus command is sent to control lighting.
This video will step through Program “Absence Detection”, it will cover those C-Bus sensors, 5751L, 5750WPL and 5753L with the old firmware v1.2.67.
If having problem of programming Absence Dotation please review FAQ “Program Absence Detection”

Product Line:
C-Bus Sensors: 5751L, 5750WPL and 5753L with the old firmware v1.2.67

Environment:
C-Bus Toolkit 1.15.5

Resolution:
  • Open C-Bus Toolkit
  • Scan the Network
  • Double click the sensor to open its GUI
  • Select a control group from the “Key 1 Group” dropdown list
  • Define the Expiry Time (5 minutes assigned by default) and click “OK”
  • Go to Key Functions tab and change the “On Key” on MD column for Short Press to “Idle”
  • A Confirm-21000 message will pop up
  • Click “YES” to accept the non-PIR functions
  • Click “Apply” or “OK”
  • Save to Database and Physical Unit
Top level --> Product category --> --> Building Automation and Control --> Building Management --> Building Management Systems --> C-Bus Automation system