23 May 2022
The drive does not trip when an input phase is removed.Product Line:
All models and serial numbersCause:
1. Parameter IPL is set to noDepending on the device type:
1) Input phase loss works by detecting the ripple in the DC Bus. If the load is not high enough, it can't detect an input phase fault.
2) Input phase loss works with the input phase detection on the rectifier circuit (ATV61/71/600/900/MX eco/MX pro) if the rectifier is thyristor controlled (power approximately >22kW). Resolution:
1. Set Parameter IPL to yes
2. Provide additional motor load.