MASTER YOUR CASTLE with your new build or reno project
Enter competition

Converting a ProWORX NxT application that has a Profibus configuration extension defined to a Concept application.

FA197314

24/01/2018

Goals and Symptoms

Converting a ProWORX NxT application that has a Profibus configuration extension defined to a Concept application.

Facts and Changes

Convertion Modsoft - Concept

Causes and Fixes

Use the following procedure to convert a ProWORX NxT application that has "Profibus configured to a Concept project.


1.) Use ProWORX NxT to download the project to the plc.
2.) Use Concept to upload the project from the plc.
3.) Define the number of "Profibus configuration extensions
4.) Add the 140 CRP 811 module to the IO Map.
5.) Click on the 'Parameter' button to bring up the module parameters.
6.) Click on the 'Import' button to import the .cnf file for the Profibus configuration.
3.) Save the application.

Note:

The Profibus related configuration information for the 140 CRP 811 mdoule does not get uploaded from the plc.


Legacy KB System (APS) Data: RESL168028 V1.0, Originally authored by on , Last Edited by on
Related ranges: ProWORX