Quantcast

What is the parameter COd used for on the ATV28 ?

FA104043

23/07/2020

Issue:
Parameter COd on the ATV28
 
Product Line:
ATV28
 
Environment:
All
 
Cause:
password
 
Resolution:

This code is used if you want to enter a password so you can limit the access to the drive parameters.

This parameter can only be seen and accessed using a remote display module or PC software.

Access code: 0 to 9999. Value 0 (factory setting) does not prevent access.  All other values lock access to the SEt-, drC- and I-O menus.

To lock access to the drive controller, the code can be incremented using up and down arrow keys then saved using  (ENT) key.

To aaccess the menus on a drive controller which is locked by a code, the code cand be incremented using up and down arrow keys and confirmed with (ENT) key.