Quantcast

Clipsal Iconic Wiser Connected Smart Switch, BLE Default Mode 2AX, 240

Vivid White | Clipsal Iconic Wiser Connected Smart Switch, BLE Default Mode 2AX, 240

Clipsal Iconic Wiser Connected Smart Switch, BLE Default Mode 2AX, 240

Item Number: 41E2PBSWM-VW

The Iconic Push Button Wiser 2AX Connected Smart Switch Module offers flexible installation options and is ideal for controlling lighting and exhaust fans. With the Wiser app, the 2AX Connected Switch Mechanism gives you 1s- 24hr timer and run-on timer functions. Use the wall switch, or your smart phone app with Bluetooth Low Energy (BLE).

Datasheet

Product Dimensions

Width icon

Width22 mm

Height icon

Height22 mm

Embedding depth icon

Embedding depth40 mm

Wiser Technical Catalogue

Download (PDF 7.4MB)
Connected Switches
Connected Switches exploded view
iconic switch

Specifications

Design

Product brand

Clipsal

Range

Iconic

Product or component type

connected switch

Colour tint

vivid white (VW)

Sustainable offer status

Green Premium product

Physical

Range compatibility

Wiser hub

Device presentation

mechanism

Number of rocker

1

Actuator

push-button

Load type

  • dimmable LED lighting driver: 2 A
  • LED lighting driver (non-dimmable): 2 A
  • electronic transformer: 2 A
  • medium voltage halogen lamp: 2 A
  • linear fluorescent ballast: 2 A
  • inductive: 2 A (cos phi =0.6 )
  • resistive: 2 A
  • motor: 2 A

[Ue] rated operational voltage

220...240 V AC 50 Hz

Protection type

  • over temperature protection
  • thermal protection

Local signalling

LED

Control type

  • push-button
  • by mobile application

Wiring configuration

3-wire

Mounting support

grid

Device mounting

flush

Fixing mode

clip-in

Fixing center

84 mm

Type of installation

indoor installation

Embedding depth

40 mm

Depth

56 mm

Width

22 mm

Height

22 mm

IP degree of protection

IP20

Relative humidity

5...90 % non-condensing

Standards

  • AS/NZS 60669.2.1 safety
  • AS/NZS 60669.2.1 EMC
  • AS/NZS 4268 radio

REACh Regulation

Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive

Compliant

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental Disclosure

ENVPEP2001003EN

Circularity Profile

ENVEOLI2001003EN

Material

Material

plastic

Others

Package 1 Bare Product Quantity

1

Technology type

electronic

Software name

Wiser by SE App

Technology type

  • bluetooth low energy default
  • Zigbee

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

2.4 cm

Package 1 Width

2.4 cm

Package 1 Length

4.1 cm

Package 1 Weight

52.0 g
Show all specifications

Frequently Asked Questions

hide show

Where can I find the files and how to update the firmware on my Zigbee Wiser devices when I don’t have the Wiser Hub?

Firmware for the Wiser devices is updated via the Wiser by SE app and is done via the mode of connection. If your device is connected in Bluetooth in Wiser by SE, you will have access to Bluetooth firmware updates and if your Wiser device is connected in Zigbee via the Wiser Hub to Wiser by SE, you will have access to Zigbee firmware updates.
Without the Wiser Hub you will be unable to connect Wiser devices via Zigbee in Wiser by SE and therefore will be unable to update your devices. 
We do not offer any other methods for updating firmware on the devices.
 

My Wiser switches are not responding to being pressed or control via Wiser by SE, what can I do to troubleshoot the issue?

Begin by taking note of the product/s that are not responding and are they doing anything else different from normal operation? For example, is the backlight flashing in a sequence, does the product respond to three presses and shows the pairing led colouring and what colours are seen. If what is suggested below does not resolve the switches not responding these details can assist the Tech Support team in diagnosing what is occurring.

Once this has been taken note of begin by power cycling your Wiser Hub. This can be done by removing the micro-USB where it connects to the Hub or by turning off the power outlet that supplies power to the Hub. Leave it off for 10 – 15 seconds and then reconnect the Wiser Hub and wait until it completes its reboot procedure at the end of which only 2 LED indicators should be visible on the Wiser Hub. With LEDs at top of Hub - if connected with Ethernet cable (Right and Left Led will turn ON). If connect via WiFi (Middle and Right Led will turn ON)

If this fails to resolve the issue the product failing to respond may need to be power cycled itself. If confidant and able, access the switchboard that has the RCBO’s or Circuit breakers that supply power to the products. Turn the applicable supply off for 10 – 15 seconds and then turn this supply back on.

Note: If uncertain contact your installing electrician for the Wiser system who may advise what is supplying power to the Wiser products. If fuses are installed in your switchboard it is recommended to have your electrician remove the fuse and then re-fit after 10 – 15 seconds. Fuses can be extremely dangerous if not correctly handled by a qualified electrician.

If the switches are still unresponsive contact Tech Support via phone – Australia: 13 73 28 (13 SEAU) New Zealand 0800 652 999, email - techsupport.pz@se.com or via online chat through a link on our support page https://www.clipsal.com/clipsal-support/contact-us or https://www.pdl.co.nz/support
 

I am getting a message in Wiser by SE ‘Network Unavailable. Please check your phones network settings’ what does this mean for my control of the products?

This message occurs when there is no mobile data connection or a WiFi connection to your device. When this occurs, you will still be able to connect to your Bluetooth switches/dimmers as these just require Bluetooth to be enabled on your device. It will prevent access/control of Zigbee devices and IP Cameras as this requires access to the cloud/internet. Via WiFi, without internet, you may still get control of the Zigbee switches/dimmers but not the IP Cameras.
 

Can I trigger a moment/scene from a Wiser wall switch?

Yes. When a number of Wiser switches/dimmers are paired with the Wiser Hub, this can be achieved with the use of an Automation and would consist of - Condition: Device status = On, Action = Enable or Disable Automation/Trigger Moment, Delay 1s, Run the device = Off.
 

Note: Only 1 moment can be used within an automation

What do the different colours of LED indication on my Wiser switches mean?

Common colour LED indications on the products -  41E10PBSWM, 41EPBDWCLM, 41E2PBSWM, 41E10PBSWMZ, 41EPBDWCLMZ, 41E2PBSWMZ:

Flashing Amber - Mechanism is in Zigbee and is currently in pairing mode, is not connected to a Hub
Flashing Green - Mechanism is in Zigbee and is in pairing mode, is already connected to a Hub
Solid Green - Mechanism is in Zigbee and is already connected to a Hub that is currently scanning for other mechanisms/devices
Flashing Red and Green - Mechanism is in BLE and is in pairing mode
Solid Amber - Mechanism is in Zigbee mode and not connected to a Hub
 

How long will my Bluetooth/BLE mech stay connected after I access it in the Wiser by SE app?

There are 3 different times linked to different situations
1. When you exit the specific device control panel and stay in the device list, the device will be disconnected after 30 seconds.
2. In the device control panel, if no operation has been detected, the device will disconnect after 5 min.
3. If you run the App in the background or lock the screen, the Bluetooth will be disconnected immediately.
 
Show More
Wiser products in kitchen

Range

A Clipsal Wiser Smart Home enables you to personalise your home to fit your needs and manage it with one simple app. It’s a simple solution that can be easily integrated into any home, old or new.

All Wiser Smart Home products are also compatible with most of Clipsal’s existing wiring devices, including the Iconic switch range, making design and function upgrades simple and seamless.

With Google Home or Amazon Echo, you can also control your Clipsal Wiser Smart Home with voice commands.

With a Clipsal Wiser Smart Home, you can take control of your home the way that it suits you.