Clipsal - Motion Sensor Motion Infrared Sensor 10A, 3 Wire, Outdoor | Grey
Item Number: 750WPR-GY
Datasheet
Specifications
Design
Range of product
Range
Product brand
Product or component type
Physical
[ue] rated operational voltage
Mounting support
- wall
- ceiling
Mounting height
Ip degree of protection
Ambient air temperature for operation
Reach free of svhc
Toxic heavy metal free
Mercury free
Rohs exemption information
Environmental disclosure
Eu rohs directive
Reach regulation
China rohs regulation
Others
Legacy weee scope
Package 1 bare product quantity
Weee label
Network frequency
Unit type of package 1
Number of units in package 1
Package 1 height
Package 1 width
Package 1 length
Package 1 weight
Sustainable packaging
End of life manual availability
Warranty (in months)
Documents & downloads
hide show-
All
-
Product Brochures
-
Installation Instruction
-
Specification Guide
-
Declaration of Conformity
-
Declaration of Conformity (Sustainability)
750WPR-GY EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
750WPR-GY EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
750WPR-GY EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
750WPR-GY EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
750WPR-GY REACh Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
750WPR-GY REACh Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
Frequently Asked Questions
What happens to the 750WPR5 when first powered up?
Hide ShowCan you wire multiple 750WPR 3-wire sensors in parallel?
Hide ShowYes, you can wire multiple 3-wire 750WPR sensors in parallel as they are a 3-wire device and aren't load dependant.
Some of the key features are:
- 10A maximum load current
- Stand-by power consumption is less than 1W
- 3 Wire
- Neutral required
- 30 seconds warmup time
- 18 metre radius x 110° rated detection field at maximum sensitivity
- 5 seconds to 20 minutes timer delay range
- Cables accommodates 4 terminals, up to 2 x 2.5mm² cable per terminal
- Relay switching method
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=750WPR
Why is the lens on my 750WPR5 bowed when I got it out of the box?
Hide ShowCan the new 750WPR5 be used to easily replace an older version of the 750WPR?
Hide ShowIs the 750WPR5 suitable for outdoor use?
Hide ShowYes.
The product has an IP rating of IP66. An IP66 rating means that the unit doesn’t allow dust or strong jets of water to enter the inside of the unit.
The product can be installed on the outside of the home in the elements with no protection as long as it is installed correctly using the gasket supplied and following the instructions.
Does the new 750WPR5 use the same relay that was used in the previous 750WPR?
Hide ShowHow do I trigger the override function on the 750WPR5?
Hide ShowEnsure the sensor is in Automatic Operation mode. Turn the wall switch controlling the sensor OFF, ON, OFF and ON within 2 seconds. Sensor is now in an 8-hour override mode. After this period times out, the sensor will return to automatic operation mode. To cancel manual override mode prior to 8 hours expiring, turn the wall switch OFF and then ON within 2 seconds.
Note - The override function has the load stay on for 8 hours. This can NOT be configured to change the 8 hours to be longer or shorter. You can only shorten this override with physical switch presses.