Standard Series Light Dimmer Universal, 450VA, 30 Series, 30 Series | White Electric
Item Number: 32E450UDM-WE
Dimmer module with rotary knob. Requires separate switch. 30 Series module. Suitable for Clipsal C2000. Colour: White Electric For universal load types including 300W dimmable LED. Operating voltage 250V a.c. 50Hz Note: Requires installation by an appropriately licenced electrician.
Datasheet
Specifications
Design
Range of product
- C-Thru
- Standard Series
- Series 30
Product brand
Surface finish
Physical
Device presentation
Dimmer type
Power consumption in w
Mounting support
Fixing mode
Standards
- AS/NZS CISPR 15:2002
- AS/NZS 3100
- IEC 60669-2-1
Mercury free
Rohs exemption information
Environmental disclosure
Eu rohs directive
Reach regulation
China rohs regulation
Material
Material
Others
Legacy weee scope
Package 1 bare product quantity
Package 2 bare product quantity
Package 3 bare product quantity
Package 4 bare product quantity
Average percentage of recycled plastic content
Weee label
Weee applicability
Network frequency
Unit type of package 1
Number of units in package 1
Package 1 height
Package 1 width
Package 1 length
Package 1 weight
Unit type of package 2
Number of units in package 2
Package 2 height
Package 2 width
Package 2 length
Package 2 weight
Unit type of package 3
Number of units in package 3
Package 3 height
Package 3 width
Package 3 length
Package 3 weight
Green premium status for reporting
Total lifecycle carbon footprint
Carbon footprint of the manufacturing phase [a1 to a3]
Carbon footprint of the manufacturing phase [a1 to a3]
Carbon footprint of the distribution phase [a4]
Carbon footprint of the distribution phase [a4]
Carbon footprint of the installation phase [a5]
Carbon footprint of the installation phase [a5]
Carbon footprint of the use phase [b2, b3, b4, b6]
Carbon footprint of the use phase [b2, b3, b4, b6]
Sustainable packaging
Carbon footprint of the end-of-life phase [c1 to c4]
Carbon footprint of the end-of-life phase [c1 to c4]
Pvc free
Halogen-free status
Take-back
Product contributes to saved and avoided emissions
Removable battery
Total lifecycle carbon footprint
Average percentage of recycled metal content
Packaging made with recycled cardboard
Packaging without single use plastic
Halogen-free status
Pvc free
End of life manual availability
Take-back
Warranty (in months)
Documents & downloads
hide show-
All
-
End of Life Manual
-
Environmental Disclosure
-
Installation Instruction
-
Declaration of Conformity
-
Declaration of Conformity (Sustainability)
32E450UDM-WE EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
32E450UDM-WE EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
32E450UDM-WE EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
32E450UDM-WE EU RoHS Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
32E450UDM-WE REACh Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
32E450UDM-WE REACh Declaration
VERSION
1.0
DATE
01 Jan 1900
REVISION
1.0
Frequently Asked Questions
I am installing a 2-wire Dimmer, when should I be using a 31CAP or 31LCDA?
Hide ShowThe 31CAP and 31LCDA both have separate uses to resolve issues experienced with 2-wire Dimmers.
The 31CAP should be used when minimum load of the device is not being met, this is usually indicated by the load/light, that is controlled by the dimmer, by glowing when it should be off. Adding the 31CAP will increase the load and prevent the load/light from glowing in the off state. Depending on how far off minimum load you are more than one 31CAP may be required.
The 31LCDA should be used in instances where the load/light is flickering constantly, which indicates an issue with compatibility with the 2-wire dimmer used. The 31LCDA resolves these incompatibilities and flickering should then stop, if the flickering is reduced but still present you may need another 31LCDA to completely resolve. No more than 3x 31LCDA’s should be used on one dimmer.