Standard Series Flush Switch 3 Gang, 250VAC, 10A, Architrave | Black
Item Number: 33A-BK
Datasheet
Close
Specifications
Design
Range of product
Standard Series
Product brand
Clipsal
Physical
Device presentation
basic element with full cover plate
Number of poles
1
Device mounting
flush
Number of rocker
3
Local signalling
without
[ue] rated operational voltage
250 V AC
Rated current
10 A
Marking
without marking
Fixing mode
by screws
Actuator
rocker
Switch function
1-pole
Eu rohs directive
Compliant with Exemptions
Mercury free
Yes
Rohs exemption information
Yes
China rohs regulation
Product out of China RoHS scope. Substance declaration for your information
Environmental disclosure
ENVPEP120506EN
Circularity profile
N/A
Others
Commercial status history
- SESA301466
- Wed Sep 27 02:54:00 EDT 2023
- From Import Local
- From 18 to 19
Package 1 bare product quantity
1
Unit type of package 1
PCE
Number of units in package 1
1
Package 1 height
3 cm
Package 1 width
3.2 cm
Package 1 length
11.3 cm
Package 1 weight
60.7 g
Unit type of package 2
BB1
Number of units in package 2
10
Package 2 height
11.7 cm
Package 2 width
10.2 cm
Package 2 length
13.8 cm
Package 2 weight
0.68 kg
Package 3 height
15.7 cm
Documents & downloads
hide showFilter items
-
All
-
Technical Data Catalogues
-
Certificates (MSDS)
Frequently Asked Questions
Why is the LCD display screen blank on a Micrologic Power or Harmonic type trip unit on a Powerpact P frame, R frame, or Masterpact circuit breaker?
Hide Show
Issue:
Why is the display blank on the trip unit?
Product Line:
Powerpact P frame, Powerpact R Frame, Masterpact NT, Masterpact NW
Resolution:
The LCD display on a Micrologic P or H trip unit will be blank unless the trip unit is energized. Energization requires one of the following sets of conditions:
Why is the display blank on the trip unit?
Product Line:
Powerpact P frame, Powerpact R Frame, Masterpact NT, Masterpact NW
Resolution:
The LCD display on a Micrologic P or H trip unit will be blank unless the trip unit is energized. Energization requires one of the following sets of conditions:
- The trip unit is energized by an external 24 Vdc applied to terminals F1-F2 (F1 negative-F2 positive). See attachment for location of terminals.
- The trip unit is energized by an FFTK or HHTK test kit
- There is at least 100 V between two phases, AND the load reaches approximately 20% of the breaker's rated current.
- Note that the display will not power up with primary injection testing unless one of the conditions in bullet 1 above is met.
- Note that Ammeter trip units do not require external power and the display will come on with sufficient current flow alone.
Video: What are the part numbers for field replaceable Micrologic trip units for PowerPact™ M,P,R, and Masterpact NT, NW circuit breakers?
Hide Show
Product Line:
Circuit Breakers
Resolution:
Following are the catalog numbers for Micrologic Trip Units used in PowerPact™ M, P, R, and Masterpact NT and NW circuit breakers.
For help with Micrologic trip units and modbus communications for Masterpact and PowerPact™ P and R circuit breakers, consult instruction manuals:
PowerPact™ P, R, and Masterpact NW, NT Micrologic™ types 2.0, 3.0 and 5.0 Trip Units, see 48049-207-05
PowerPact™ P, R, and Masterpact NW, NT Micrologic™ 2.0A, 3.0A, 5.0A, and 6.0A Trip Units, see 48049-136-05
PowerPact™ P, R, and Masterpact NW, NT Micrologic™ 5.0P and 6.0P Trip Units, see 48049-137-05
PowerPact™ P, R, and Masterpact NW, NT Micrologic™ 5.0H and 6.0H Trip Units, see 48049-330-03
The following video demonstrates how to install and remove a Micrologic Trip Unit from a PowerPact™ P-Frame Molded Case Circuit Breaker:
Circuit Breakers
Resolution:
Following are the catalog numbers for Micrologic Trip Units used in PowerPact™ M, P, R, and Masterpact NT and NW circuit breakers.
| Model | Protection | Cat. # |
| 2.0 (IEC only) | LSO | S132R |
| 3.0 (UL/ANSI only) | LI | S131A |
| 5.0 | LSI | S133A |
| 2.0A (IEC only) | LSO | S142R |
| 3.0A (UL/ANSI only) | LI | S141A |
| 5.0A | LSI | S143A |
| 6.0A | LSIG | S144A |
| 5.0P | LSI | S163A |
| 6.0P | LSIG | S164A |
| 5.0H | LSI | S173A |
| 6.0H | LSIG | S174A |
For help with Micrologic trip units and modbus communications for Masterpact and PowerPact™ P and R circuit breakers, consult instruction manuals:
PowerPact™ P, R, and Masterpact NW, NT Micrologic™ types 2.0, 3.0 and 5.0 Trip Units, see 48049-207-05
PowerPact™ P, R, and Masterpact NW, NT Micrologic™ 2.0A, 3.0A, 5.0A, and 6.0A Trip Units, see 48049-136-05
PowerPact™ P, R, and Masterpact NW, NT Micrologic™ 5.0P and 6.0P Trip Units, see 48049-137-05
PowerPact™ P, R, and Masterpact NW, NT Micrologic™ 5.0H and 6.0H Trip Units, see 48049-330-03
The following video demonstrates how to install and remove a Micrologic Trip Unit from a PowerPact™ P-Frame Molded Case Circuit Breaker:
What is the part number for a mounting block to suit a C2033A?
Hide Show
Unfortunately there is no mounting block for this product.