Standard Series Automatic Single Socket Outlet 250VAC, 10A, 1 Pole

Home ProductsPower Points and SwitchesStandard SeriesAutomatic Single Socket Outlet

Standard Series Automatic Single Socket Outlet 250VAC, 10A, 1 Pole | Black

Item Number: 10-BK

Where To Buy

Datasheet

PDF datasheet

Download

Barcode

Qty UoM EAN Colour
-
-
-
See all

Specifications

Design

Range of product

Standard Series

Product or component type

socket-outlet

Product brand

Clipsal

Physical

Quantity per set

set of 1

Marking

without marking

Local signalling

without light indicator

Device mounting

flush

Fixing mode

by screws

[in] rated current

10 A

[ue] rated operational voltage

250 V AC

Depth

16 mm

Length

115 mm

Fixing center

84 mm

Number of poles

1

Width

73 mm

Standards

  • AS/NZS 3100
  • AS/NZS 3112
  • AS/NZS 3133:approval number S/1

Mercury free

Yes

Rohs exemption information

Yes

Environmental disclosure

ENVPEP120506EN

Eu rohs directive

Compliant with Exemptions

Reach regulation

Reference contains Substances of Very High Concern above the threshold

China rohs regulation

Product out of China RoHS scope. Substance declaration for your information

Others

Average percentage of recycled plastic content

0 %

Package 2 bare product quantity

5

Package 1 bare product quantity

1

Legacy weee scope

In

Outside of Europe

Weee label

N/A

Weee applicability

Finished product

Cover type

full cover plate

Unit type of package 1

PCE

Number of units in package 1

1

Package 1 height

3 cm

Package 1 width

7 cm

Package 1 length

11.2 cm

Package 1 weight

74 g

Unit type of package 2

BB1

Number of units in package 2

5

Package 2 height

10.6 cm

Package 2 width

12.2 cm

Package 2 length

14.2 cm

Package 2 weight

438 g

Green premium status for reporting

Green Premium product

Total lifecycle carbon footprint

0.7 kg CO2 eq.

Carbon footprint of the manufacturing phase [a1 to a3]

0.36220726842580725

Carbon footprint of the manufacturing phase [a1 to a3]

0.4 kg CO2 eq.

Carbon footprint of the distribution phase [a4]

0.013686452389131142

Carbon footprint of the distribution phase [a4]

0 kg CO2 eq.

Carbon footprint of the installation phase [a5]

0.002478047529469727

Carbon footprint of the installation phase [a5]

0 kg CO2 eq.

Carbon footprint of the use phase [b2, b3, b4, b6]

0.1056339273201361

Carbon footprint of the use phase [b2, b3, b4, b6]

0.1 kg CO2 eq.

Sustainable packaging

No

Carbon footprint of the end-of-life phase [c1 to c4]

0.18049277023565685

Carbon footprint of the end-of-life phase [c1 to c4]

0.2 kg CO2 eq.

Pvc free

Yes

Halogen-free status

Product contains halogen above thresholds

Take-back

No

Product contributes to saved and avoided emissions

No

Removable battery

N/A

Total lifecycle carbon footprint

0.6644984659002011

Average percentage of recycled metal content

0 %

Packaging made with recycled cardboard

Yes

Packaging without single use plastic

No

Halogen-free status

Product contains halogen above thresholds

Pvc free

Yes

End of life manual availability

N/A

Take-back

No

Warranty (in months)

18
Show all specifications

Frequently Asked Questions

Can I use the rotary Wiser dimmer adaptor with 2AX and 10AX Wiser ZigBee Switches?

Hide Show
No, the rotary wiser dimmer adaptor is for the Wiser ZigBee Dimmer only.

How do I convert Iconic Wiser™ Connected Switches or Dimmers from Zigbee to BLE

Hide Show

See below video

Can the Wiser Micro Module Dimmer have LED indication?

Hide Show
The Micro module Dimmer cannot be used with LED indication other than having the indicator always on. This is due to the Switch mechanism required for control being a momentary or Bell press type and using the 2nd terminal and a neutral connection would simply have the LED on permanently unless you were pressing the switch in.

Connecting the LED indicator to the ‘I’ terminal can create a pathway that interferes with the electrical signal the module is triggered with sometimes causing the switch control to not function or the module to behave erratically.

Connecting the LED indicator to the ‘L’ terminal means the module is then actively trying to dim the indicator also and with the led indicators being non-dimmable will cause an error in the module.
 

What do the different colours of LED indication on my Wiser switches mean?

Hide Show
Common colour LED indications on the products -  41E10PBSWM, 41EPBDWCLM, 41E2PBSWM, 41E10PBSWMZ, 41EPBDWCLMZ, 41E2PBSWMZ:

Flashing Amber - Mechanism is in Zigbee and is currently in pairing mode, is not connected to a Hub
Flashing Green - Mechanism is in Zigbee and is in pairing mode, is already connected to a Hub
Solid Green - Mechanism is in Zigbee and is already connected to a Hub that is currently scanning for other mechanisms/devices
Flashing Red and Green - Mechanism is in BLE and is in pairing mode
Solid Amber - Mechanism is in Zigbee mode and not connected to a Hub
 

What is MAXBAR?

Hide Show
MAXBAR is a top feeding comb busbar able to feed Line & Neutral from the Main incoming Switch or MCB and neutral terminal directly to all type of Clipsal RCBOs and AFDDs. 

There are Comb busbar for 1P+N and 3P+N applications. There is one variant with neutral terminal block for rows with Main Switch  and another variant for rows without Main switch.



What colours are the new Iconic Outdoor Products available in?

Hide Show
Iconic Outdoor is available in Matte White -XW and Matte Black -BK.

Iconic Outdoor switchIconic Outdoor switch

Do I need to use any caps or silicone on the mounting screws on the Iconic Outdoor?

Hide Show
All Iconic Outdoor mounting points are outside the wiring area and do not need to be drilled or any additional sealant applied.

showing mounting hole of Iconic Outdoor

What size conduit entries can be used with Iconic Outdoor?

Hide Show
Iconic Outdoor suits both 20mm and 25mm conduit.

Iconic Outdoor conduit entry
 

What is the replacement for the LC1D1810 at 415 volt?

Hide Show
The replacement for the LC1D1810 at 415 volt is the LC1D18N7.....comes with 1 N/O and 1 N/C auxiliary already fitted as standard. 

image.png

https://www.clipsal.com/products/detail?CatNo=LC1D18N7&itemno=LC1D18N7&backto=/search?q=LC1D18N7&tab-document-1=0
 

What are the differences between the 10AX (41E10PBSWM and 41E10PBSWMZ) and the 2AX (41E2PBSWM and 41E2PBSWMZ) Wiser switches?

Hide Show
10AX has the ability to include multiway switching with control links where the 2AX does not.
As per images below there is a size difference between the two mechanisms. This size difference shows that with the 10AX you are limited to the plates you can fit these to being 1 – 3 gang (or added to the centre of a 5-gang plate). The 10AX switch will fit into deep wall boxes and cavity walls.
The 2AX does not have this limitation and can fit 1 – 6 gang plates. It is also not as deep as the 10AX and can fit into most standard wall boxes. The 10AX switch will fit into deep wall boxes and cavity walls.
2AX in Bluetooth is unable to have schedules set and the 10AX in Bluetooth can.
As per the load tables the 10AX can handle larger loads when compared to the 2AX.
 
10AX
image.pngimage.png
2AX
image.pngimage.png
 

What can I do to solve connectivity issues with my Iconic Bluetooth switches (41E10PBSWM and 41EPBDWCLM)?

Hide Show
If you are experiencing connectivity issues here is a list to check that can help resolve issues.
 
Is the product Bluetooth capable? 
Check your product code and its instructions for confirmation

Is your Bluetooth on and is your phone/device currently connected to any other Bluetooth devices?
If you are currently connected to another Bluetooth item it is recommended to disconnect.

Are you in range of the product?
You should be within 8-10m or be in the same room but it is recommended to stand directly in front of the product.

Are there multiple Bluetooth capable products in a 2 or 3 gang switch plate?
If so, the recommendation is that in a 2-gang plate the top mechanism should be rotated upside down OR in a 3-gang plate rotate the middle mechanism upside down. This can limit interference caused by have the BLE antenna lined up in all the mechanisms.

Is the indicator LED solid Amber/Orange and flashing the same colour when in pairing mode?
The mechanism is in Zigbee mode and will not pair via Bluetooth. 

Have you previously connected to the product using the same phone/device?
Make sure the product has been removed from the App and check your phone/device Bluetooth settings and remove it from there also if present.

After all these checks are completed and you are ready to attempt the pairing procedure it is recommended to carry out a factory reset and then power cycle the mechanism. It can also help to restart the App or a full restart of your phone/device

Note: For all information on how to put a product into pairing mode and do a factory reset please refer to the installation instructions for the specific product.
41E10PBSWM
 

How to install and connect an IFE module and TRV00210 units [Video]

Hide Show
Resolution:
Install IFE module on din mount. Ensure that the back connector lines up with that of the connect on the din rail.
Install TRV00210 units similar to that of the IFE module, ensuring that the connectors are all aligned.
Supply power to the din rail. To verify correct installation, the units’ LEDs will indicate and flash.

The objective of this video is to provide guidance for installing an IFE module with TRV00210 units on a din mount

Are Masterpact NW and NT circuit breakers 100% Rated?

Hide Show
Issue:
Are Masterpact circuit breakers 100% Rated?

Product Line:
Masterpact NT and NW

Environment:
NEMA influenced markets only

Resolution:
All UL 489 listed Masterpact NT and NW circuit breakers are 100% rated.
Note that standard 80% vs. 100% rating applies to breakers listed per UL 489 only.
 

What is the replacement AC coil for CAD32 and CAD50 relay?

Hide Show
Issue:
AC coil replacement for CAD32 and CAD50

Product Line:
Relays

Environment:
Tesys CAD Control Relays

Cause:
Product selection

Resolution:
Volt = coil part number
12 = LXD1J7
21 = LXD1Z7
24 = LXD1B7
32 = LXD1C7
36 = LXD1CC7
42 = LXD1D7
48 = LXD1E7
60 = LXD1EE7
100 = LXD1K7
110 = LXD1F7
115 = LXD1FE7
120 = LXD1G7
127 = LXD1FC7
200 = LXD1L7
208 = LXD1LL7
220/230 = LXD1M7
230 595 21 LXD1P7
230/240 = LXD1U7
277 781 30 LXD1W7
380/400 = LXD1Q7
400 = LXD1V7
415 = LXD1N7
440 = LXD1R7
480 = LXD1T7
600 = LXD1X7
690 = LXD1Y7

 

Recently viewed