| Legacy weee scope |
In |
| Package 1 bare product quantity |
1 |
| Package 2 bare product quantity |
12 |
| Package 3 bare product quantity |
144 |
| Average percentage of recycled plastic content |
0 % |
| |
At least in Europe |
| Warranty duration(in months) bmecat |
18 |
| Weee label |
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
| [us] rated supply voltage |
24 V DC |
| Discrete input number |
24 , discrete input 4 fast input conforming to IEC 61131-2 Type 1 |
| Analogue input number |
2 at 0...10 V |
| Discrete output type |
transistor |
| Discrete output number |
16 transistor 2 fast output |
| Discrete output voltage |
24 V DC |
| Discrete output current |
0.5 A |
| Discrete i/o number |
40 |
| Maximum number of i/o expansion module |
- 7 (local I/O-Architecture)
- 14 (remote I/O-Architecture)
|
| Supply voltage limits |
20.4...28.8 V |
| Maximum power consumption in w |
- 4.1 W at 24 V (without I/O expansion module)
- 16 W at 24 V (with max number of I/O expansion module)
|
| Power supply output current |
- 0.52...0.52 A 5 V for expansion bus
- 0.3...0.3 A 24 V for expansion bus
|
| Discrete input logic |
sink or source (positive/negative) |
| Discrete input voltage |
24 V |
| Discrete input voltage type |
DC |
| Analogue input resolution |
10 bits |
| Lsb value |
10 mV |
| Conversion time |
1 ms per channel + 1 controller cycle time for analogue input analog input |
| Permitted overload on inputs |
- +/- 30 V DC for 5 min (maximum) for analog input
- +/- 13 V DC (permanent) for analog input
|
| Voltage state 1 guaranteed |
>= 15 V for input |
| Voltage state 0 guaranteed |
<= 5 V for input |
| Discrete input current |
- 7 mA for discrete input
- 5 mA for fast input
|
| Input impedance |
- 3.4 kOhm for discrete input
- 100 kOhm for analog input
- 4.9 kOhm for fast input
|
| Response time |
- 35 µs turn-off, I2...I5 terminal(s) for input
- 5 µs turn-on, I0, I1, I6, I7 terminal(s) for fast input
- 35 µs turn-on, other terminals terminal(s) for input
- 5 µs turn-off, I0, I1, I6, I7 terminal(s) for fast input
- 100 µs turn-off, other terminals terminal(s) for input
- 5 µs turn-on, turn-off, Q0...Q1 terminal(s) for output
- 50 µs turn-on, turn-off, Q2...Q3 terminal(s) for output
- 300 µs turn-on, turn-off, other terminals terminal(s) for output
|
| Configurable filtering time |
- 0 ms for input
- 3 ms for input
- 12 ms for input
|
| Discrete output logic |
positive logic (source) |
| Maximum current per output common |
4 A |
| Output frequency |
- 100 kHz for fast output (PWM/PLS mode) at Q0...Q1
- 5 kHz for output at Q2...Q3
- 0.1 kHz for output at Q4...Q15
|
| Absolute accuracy error |
+/- 1 % of full scale for analog input |
| Maximum leakage current |
0.1 mA for transistor output |
| Maximum voltage drop |
<1 V |
| Maximum tungsten load |
<12 W for output and fast output |
| Reset time |
1 s automatic reset |
| Memory capacity |
- 256 kB for user application and data RAM with 10000 instructions
- 256 kB for internal variables RAM
|
| Data backed up |
256 kB built-in flash memory for backup of application and data |
| Data storage equipment |
2 GB SD card (optional) |
| Battery type |
BR2032 or CR2032X lithium non-rechargeable |
| Execution time for 1 kinstruction |
0.3 ms for event and periodic task |
| Execution time per instruction |
0.2 µs Boolean |
| Exct time for event task |
60 µs response time |
| Maximum size of object areas |
- 255 %TM timers
- 512 %M memory bits
- 255 %C counters
- 512 %KW constant words
- 8000 %MW memory words
|
| Realtime clock |
with |
| Clock drift |
<= 30 s/month at 25-25 °C |
| Regulation loop |
adjustable PID regulator up to 14 simultaneous loops |
| Positioning functions |
- Position PTO 2 axe(s)pulse/direction mode (100 kHz)
- Position PTO 1 axe(s)CW/CCW mode (100 kHz)
|
| Counting input number |
4 fast input (HSC mode) at 100 kHz 32 bits |
| Transmission rate |
- 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15-15 m for RS485
- 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3-3 m for RS232
- 480 Mbit/s for USB
|
| Electrical connection |
- removable screw terminal block for inputs
- removable screw terminal block for outputs
- terminal block, 3 terminal(s) for connecting the 24 V DC power supply
- connector, 4 terminal(s) for analogue inputs
- mini B USB 2.0 connector for a programming terminal
|
| Maximum cable distance between devices |
- shielded cable: <10 m for fast input
- unshielded cable: <30 m for output
- unshielded cable: <30 m for digital input
- unshielded cable: <1 m for analog input
- shielded cable: <3 m for fast output
|
| Insulation |
- between input and internal logic at 500 V AC
- between fast input and internal logic at 500 V AC
- non-insulated between inputs
- between output and internal logic at 500 V AC
- non-insulated between analogue input and internal logic
- non-insulated between analogue inputs
|
| Resistance to electrostatic discharge |
- 8 kV in air conforming to IEC 61000-4-2
- 4 kV on contact conforming to IEC 61000-4-2
|
| Resistance to electromagnetic fields |
- 10 V/m 80 MHz...1 GHz conforming to IEC 61000-4-3
- 3 V/m 1.4 GHz...2 GHz conforming to IEC 61000-4-3
- 1 V/m 2...2.7 GHz conforming to IEC 61000-4-3
|
| Resistance to magnetic fields |
30 A/m 50/60 Hz conforming to IEC 61000-4-8 |
| Resistance to fast transients |
- 2 kV (power lines) conforming to IEC 61000-4-4
- 2 kV (relay output) conforming to IEC 61000-4-4
- 1 kV (I/O) conforming to IEC 61000-4-4
- 1 kV (Ethernet line) conforming to IEC 61000-4-4
- 1 kV (serial link) conforming to IEC 61000-4-4
|
| Surge withstand |
- 2 kV power lines (AC) common mode conforming to IEC 61000-4-5
- 2 kV relay output common mode conforming to IEC 61000-4-5
- 1 kV I/O common mode conforming to IEC 61000-4-5
- 1 kV shielded cable common mode conforming to IEC 61000-4-5
- 0.5 kV power lines (DC) differential mode conforming to IEC 61000-4-5
- 1 kV power lines (AC) differential mode conforming to IEC 61000-4-5
- 1 kV relay output differential mode conforming to IEC 61000-4-5
- 0.5 kV power lines (DC) common mode conforming to IEC 61000-4-5
|
| Resistance to conducted disturbances |
- 10 V 0.15...80 MHz conforming to IEC 61000-4-6
- 3 V 0.1...80 MHz conforming to Marine specification (LR, ABS, DNV, GL)
- 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL)
|
| Electromagnetic emission |
- conducted emissions - test level: 79 dBμV/m QP/66 dBμV/m AV ( power lines (AC)) at 0.15-0.5 MHz conforming to IEC 55011
- conducted emissions - test level: 73 dBμV/m QP/60 dBμV/m AV ( power lines (AC)) at 0.5-300 MHz conforming to IEC 55011
- conducted emissions - test level: 120...69 dBµV/m QP ( power lines) at 10-150 kHz conforming to IEC 55011
- conducted emissions - test level: 63 dBμV/m QP ( power lines) at 1.5-30 MHz conforming to IEC 55011
- radiated emissions - test level: 40 dBμV/m QP class A ( 10 m) at 30-230 MHz conforming to IEC 55011
- conducted emissions - test level: 79...63 dBμV/m QP ( power lines) at 150-1500 kHz conforming to IEC 55011
- radiated emissions - test level: 47 dBμV/m QP class A ( 10 m) at 200-1000 MHz conforming to IEC 55011
|
| Immunity to microbreaks |
10 ms |
| Pollution degree |
<= 2 |
| Operating altitude |
0...2000 m |
| Storage altitude |
0...3000 m |
| Vibration resistance |
- 3.5 mm at 5-8.4 Hz on symmetrical rail
- 3.5 mm at 5-8.4 Hz on panel mounting
- 1 gn at 8.4-150 Hz on symmetrical rail
- 1 gn at 8.4-150 Hz on panel mounting
|
| Shock resistance |
147 m/s² for 11 ms |
| Unit type of package 1 |
PCE |
| Number of units in package 1 |
1 |
| Package 1 height |
11.000 cm |
| Package 1 width |
14.000 cm |
| Package 1 length |
21.000 cm |
| Package 1 weight |
750.000 g |
| Unit type of package 2 |
S04 |
| Number of units in package 2 |
12 |
| Package 2 height |
30.000 cm |
| Package 2 width |
40.000 cm |
| Package 2 length |
60.000 cm |
| Package 2 weight |
10.100 kg |
| Unit type of package 3 |
P12 |
| Number of units in package 3 |
144 |
| Package 3 height |
105.000 cm |
| Package 3 width |
80.000 cm |
| Package 3 length |
120.000 cm |
| Package 3 weight |
135.000 kg |
| Green premium status for reporting |
Green Premium product |
| Total lifecycle carbon footprint |
111 kg CO2 eq. |
| Carbon footprint of the manufacturing phase [a1 to a3] |
24.06534140883822 |
| Carbon footprint of the manufacturing phase [a1 to a3] |
24 kg CO2 eq. |
| Carbon footprint of the distribution phase [a4] |
1.4889920127100542 |
| Carbon footprint of the distribution phase [a4] |
1 kg CO2 eq. |
| Carbon footprint of the installation phase [a5] |
0.011054934010189069 |
| Carbon footprint of the installation phase [a5] |
0 kg CO2 eq. |
| Carbon footprint of the use phase [b2, b3, b4, b6] |
84.20284698809256 |
| Carbon footprint of the use phase [b2, b3, b4, b6] |
84 kg CO2 eq. |
| Sustainable packaging |
Yes |
| Carbon footprint of the end-of-life phase [c1 to c4] |
1.416600259893465 |
| Carbon footprint of the end-of-life phase [c1 to c4] |
1 kg CO2 eq. |
| Pvc free |
Yes |
| Take-back |
No |
| Product contributes to saved and avoided emissions |
No |
| Removable battery |
N/A |
| Total lifecycle carbon footprint |
111.18483560354449 |
| Average percentage of recycled metal content |
0 % |
| Packaging made with recycled cardboard |
Yes |
| Packaging without single use plastic |
No |
| Scip number |
a2104b7f-cc2a-4595-91f9-9d225d360d5c |
| China rohs label |
5 |
| Pvc free |
Yes |
| End of life manual availability |
ENVEOLI1403012EN |
| Take-back |
No |
| Weee label |
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
| Warranty (in months) |
18 |