Harmony Control Relays Modular multifunction 3-phase supply Control Relay 5A, 1CO, 208...480V AC
Item Number: RM17TA00
Datasheet
Specifications
Design
Range of product
Product or component type
Warranty
Physical
Connections - terminals
[in] rated current
Insulation resistance
- > 500 MOhm at 500 V DC conforming to IEC 60255-5
- > 500 MOhm at 500 V DC conforming to IEC 60664-1
Connections - terminals
- screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
- screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
- screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
- screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
Local signalling
- LED (green) for power ON
- LED (yellow) for relay ON
Mounting support
Electrical durability
Mechanical durability
Width
Net weight
Control type
Standards
Product certifications
- GOST
- CSA
- GL
- C-Tick
- UL
Marking
Ambient air temperature for storage
Ambient air temperature for operation
Relative humidity
Ip degree of protection
- IP20 (terminals) conforming to IEC 60529
- IP30 (casing) conforming to IEC 60529
Mercury free
Rohs exemption information
Environmental disclosure
Eu rohs directive
Reach regulation
China rohs regulation
California proposition 65
Others
Package 2 bare product quantity
Average percentage of recycled plastic content
Package 1 bare product quantity
Legacy weee scope
Weee label
Relay type
Relay name
Relay monitored parameters
- asymmetry
- phase sequence
- phase failure detection
Measurement range
Time delay type
Output contacts
Nominal output current
Contacts type and composition
[uc] control circuit voltage
Product specific application
[us] rated supply voltage
Supply voltage limits
Reset time
Maximum switching voltage
- 250 V AC
- 250 V DC
Switching capacity in va
Minimum switching current
Maximum switching current
- 5 A AC
- 5 A DC
Control circuit voltage limits
Power consumption in va
Control circuit frequency
Measurement voltage limits
Hysteresis
Run-up delay at power-up
Maximum measuring cycle
Voltage range
Adjustment of asymmetry threshold
Repeat accuracy
- 0.5 % for input and measurement circuit
- 3 % for time delay
Measurement error
- < 0.05 %/°C with temperature variation
- < 1 % over the whole range with voltage variation
Phase failure sensitivity
Response time
[ui] rated insulation voltage
Supply frequency
Operating position
Tightening torque
Housing material
Operating rate
Utilisation category
- AC-12 conforming to IEC 60947-5-1
- AC-13 conforming to IEC 60947-5-1
- AC-14 conforming to IEC 60947-5-1
- AC-15 conforming to IEC 60947-5-1
- DC-12 conforming to IEC 60947-5-1
- DC-13 conforming to IEC 60947-5-1
Safety reliability data
- MTTFd = 502.2 years
- B10d = 470000
Functionality
Compatibility code
Electromagnetic compatibility
- emission standard for industrial environments conforming to IEC 61000-6-4
- emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3
- immunity for industrial environments conforming to IEC 61000-6-2
Directives
- 89/336/EEC - electromagnetic compatibility
- 73/23/EEC - low voltage directive
Vibration resistance
- 0.35 mm (f= 5-57.6 Hz) conforming to IEC 60068-2-6
- 1 gn (f= 57.6-150 Hz) conforming to IEC 60255-21-1
Shock resistance
Pollution degree
Overvoltage category
Dielectric test voltage
- 2 kV, 1 min AC 50 Hz conforming to IEC 60255-5
- 2 kV, 1 min AC 50 Hz conforming to IEC 60664-1
Non-dissipating shock wave
- 4 kV conforming to IEC 60255-5
- 4 kV conforming to IEC 60664-1
- 4 kV conforming to IEC 61000-4-5
Unit type of package 1
Number of units in package 1
Package 1 height
Package 1 width
Package 1 length
Package 1 weight
Unit type of package 2
Number of units in package 2
Package 2 height
Package 2 width
Package 2 length
Package 2 weight
Green premium status for reporting
Total lifecycle carbon footprint
Carbon footprint of the manufacturing phase [a1 to a3]
Carbon footprint of the manufacturing phase [a1 to a3]
Carbon footprint of the distribution phase [a4]
Carbon footprint of the distribution phase [a4]
Carbon footprint of the installation phase [a5]
Carbon footprint of the installation phase [a5]
Carbon footprint of the use phase [b2, b3, b4, b6]
Carbon footprint of the use phase [b2, b3, b4, b6]
Sustainable packaging
Carbon footprint of the end-of-life phase [c1 to c4]
Carbon footprint of the end-of-life phase [c1 to c4]
Take-back
Product contributes to saved and avoided emissions
Removable battery
Total lifecycle carbon footprint
Average percentage of recycled metal content
Packaging made with recycled cardboard
Packaging without single use plastic
Scip number
End of life manual availability
Take-back
Warranty (in months)
Documents & downloads
hide show-
All
-
CAD Files and Packs
-
Technical Data Catalogues
-
End of Life Manual
-
Environmental Disclosure
-
Installation Instruction
-
Technical illustration
-
Application Notes
-
Certificates (MSDS)
-
eTechPub
-
Declaration of Conformity
-
Declaration of Conformity (Sustainability)