Specifications
Design
| Range | Fire Tek |
|---|---|
| Product brand | Clipsal |
| Product or component type | smoke detector |
| Device application | early detection of smouldering fires and open fires |
| Colour tint | white (RAL 9003) |
Physical
| Type of packing | box |
|---|---|
| Communication network type | wired without |
| Function available | local alarm |
| Control type | with test button (1 function) |
| Operating distance | 0...100 m indoor use only |
| Local signalling | continuous or intermittent buzzer: 40 red indicator with alarm (green/red) for alarm status |
| Connections - terminals | cable terminal (back of the device) |
| Type of installation | indoor |
| Device mounting | surface |
| Mounting support | ceiling |
| Fixing mode | 4 fixing points |
| Height | 140 mm |
| Width | 140 mm |
| Depth | 44.5 mm |
| Net weight | 0.302 kg |
| Ip degree of protection | IP20 conforming to AS 3786 |
| Ambient air temperature for operation | 0...45 °C |
| Ambient air temperature for storage | -20...65 °C |
| Relative humidity | 0...90 % |
| Product certifications | conforming to AS 3786 |
| Standards | AS 3786 |
| Mercury free | Yes |
| Rohs exemption information | Yes |
| Environmental disclosure | ENVPEP2511032EN |
| Eu rohs directive | Compliant By Exemption |
Material
| Material | ABS + PC |
|---|
Documents & downloads
-
All
-
Technical Data Catalogues
-
Installation Instruction
-
End of Life Manual
-
Environmental Disclosure
-
Certificates (MSDS)
-
Declaration of Conformity (Sustainability)
Frequently Asked Questions
Which smoke alarms are compatible with each base?
Hide ShowThe Current Fire Tek® mains-powered alarms are designed to be retrofit-compatible with legacy mains-powered mounting bases, helping for quick upgrades in most applications without replacing the existing base.
Retrofit Compatibility – current alarms fitting the existing legacy bases:
Reverse compatibility: the current Fire Tek® mounting bases also accept compatible legacy alarm heads, as above. However, functionality may vary depending on the alarm model. For best results, we recommend replacing alarms with the most current equivalent model.
Accessory Base Compatibility: Additional accessory bases are available separately and can replace the standard base of mains-powered surface-mount alarms when extra functionality is required.
Alarms that are NOT compatible with accessory bases – 755PFM4, 755LPSMA4