Clipsal Iconic Push Button Wiser Smart Switch Mechanism 10A, ControlLink, 3-Wire

Home ProductsSmart Home SolutionsWiser Smart Home SolutionsPush Button Wiser Smart Switch Mechanism

Clipsal Iconic Push Button Wiser Smart Switch Mechanism 10A, ControlLink, 3-Wire | VW

Item Number: 41E10PBSWM-VW

The Clipsal Iconic Push Button Wiser 10A ControlLink Smart Switch Module gives you additional control for your loads. Working with the Wiser app, the ControlLink Switch Mechanism gives you 24 hour timer and 24/7 scheduling functions. Use the wall switch, or your smart phone app.

Datasheet

Product Dimensions

Width icon

Width48 mm

Height icon

Height22 mm

Embedding depth icon

Embedding depth53 mm

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Range

Iconic

Product or component type

connected switch

Colour tint

vivid white (VW)

Sustainable offer status

Green Premium product

Physical

Device presentation

mechanism

Number of rocker

1

Actuator

push-button

Load type

dimmable LED lighting driver: 10 A|LED lighting driver (non-dimmable): 10 A|electronic transformer: 10 A|medium voltage halogen lamp: 10 A|linear fluorescent ballast: 10 A|inductive: 6 A (cos phi =0.6 )|resistive: 15 A|motor: 10 A

[ue] rated operational voltage

220...240 V AC 50 Hz

Protection type

over temperature protection|thermal protection

Local signalling

LED

Control type

push-button|by mobile application|multi-way control via ControlLink

Communication network type

wireless (2.4-2.4 GHz), 2.5 mW at < 50 m

Wiring configuration

3-wire

Mounting support

grid

Device mounting

flush

Fixing mode

clip-in

Fixing center

84 mm

Type of installation

indoor installation

Embedding depth

53 mm

Depth

56 mm

Width

48 mm

Height

22 mm

Ip degree of protection

IP20

Relative humidity

5...90 % non-condensing

Standards

AS/NZS 60669.2.1 safety|AS/NZS 60669.2.1 EMC|AS/NZS 4268 radio

Reach regulation

Reference contains Substances of Very High Concern above the threshold

Eu rohs directive

Compliant with Exemptions

Mercury free

Yes

Rohs exemption information

Yes

China rohs regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental disclosure

ENVPEP2001003EN

Circularity profile

ENVEOLI2001003EN

Material

Material

plastic

Others

Package 1 bare product quantity

1

Concentrator compatibility

Wiser hub generation 1

Mobile app name

Wiser by SE

Technology type

electronic

Software name

Wiser App

Maximum number of connected devices

3 (switch)|2 (ControlLink module)

Cable length

50 m for ControlLink module

Technology type

bluetooth low energy default|Zigbee

Memory description

backup memory - date and time for 6 h|backup memory - program for indefinite period

Main colour tint

vivid white

Unit type of package 1

PCE

Number of units in package 1

1

Package 1 height

4 cm

Package 1 width

7.8 cm

Package 1 length

9.5 cm

Package 1 weight

91 g

Unit type of package 2

CAR

Number of units in package 2

48

Package 2 height

224 cm

Package 2 width

261 cm

Package 2 length

335 cm

Package 2 weight

5 kg
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Other technical guide

  • Technical Data Catalogues

  • Environmental Disclosure

  • Installation Instruction

  • End of Life Manual

  • Operating Manuals

  • Case Studies

  • Certificates (MSDS)

Frequently Asked Questions

hide show

I want to put in two-way switching but can’t run the cables between the mechanisms. Can I achieve wireless two-way switching with Wiser Zigbee?

This can be done with our 2AX, 10AX or Micro Module Switch along with the Hub. At one end you will need an Active, Neutral and Load wiring. At the other end you will need Active and Neutral only. You can then create Automations to achieve the 2-way.
You need to create two automations for a 2-way:
 
  1. when switch A and switch B are ON, turn switch A and switch B ON
  2. when switch A and switch B are OFF, turn switch A and switch B OFF


This can be expanded to 3-way, 4-way etc by simply adding the other switches into the respective ON and OFF automations.


2 way ON Automation2 way OFF Automation

Where can I find the files and how to update the firmware on my Zigbee Wiser devices when I don’t have the Wiser Hub?

Firmware for the Wiser devices is updated via the Wiser by SE app and is done via the mode of connection. If your device is connected in Bluetooth in Wiser by SE, you will have access to Bluetooth firmware updates and if your Wiser device is connected in Zigbee via the Wiser Hub to Wiser by SE, you will have access to Zigbee firmware updates.
Without the Wiser Hub you will be unable to connect Wiser devices via Zigbee in Wiser by SE and therefore will be unable to update your devices. 
We do not offer any other methods for updating firmware on the devices.
 

What is the Standby Power of my Wiser devices?

Wiser Micro Module Switch - CLP5011WSZ/PDL5011WSZ - 0.4 W
Wiser Micro Module Dimmer - CLP5010WDZ/PDL5010WDZ - 0.4 W
Wiser Micro Module Blind - CLP5015WBZ/PDL5015WBZ - 0.4 W
Wiser Hub - CLP501902/PDL501902 - 0.2 W 
Bluetooth 2AX - 41E2PBSWM-VW/PDL356PB2MBTW-VW - 0.25 W
Bluetooth 10AX - 41E10PBSWM-VW/PDL356PB10MBTW-VW - 0.20 W
Bluetooth Dimmer - 41EPBDWCLM-VW/PDL354PBDMBTW-VW - 0.50 W
Bluetooth Socket - 3025CSG/PDL395CSG - 0.30 W
ZigBee 2AX - 41E2PBSWMZ-VW/PDL356PB2MBTZ-VW - 0.25 W
ZigBee 10AX - 41E10PBSWMZ-VW/PDL356PB10MBTZ-VW - 0.20 W
ZigBee Dimmer - 41EPBDWCLMZ-VW/PDL354PBDMBTZ-VW - 0.50 W
ZigBee Socket - 3025CSGZ/PDL395CSGZ - 0.30 W

How Can I Change a Wiser Mechanism from Zigbee to Bluetooth

To swap a Zigbee enabled switch to Bluetooth, press the switch 4 times and hold on the 4th press for 20+ seconds.
When holding the button in at the 10 second mark a slow flashing red led should be visible, releasing at this point would be a factory reset. Continue to hold until the red led starts flashing rapidly at the 20 second mark and then release. 
This method of changing the mode of the mechanism will work Zigbee to Bluetooth and also Bluetooth to Zigbee.
 

I am getting a message in Wiser by SE ‘Network Unavailable. Please check your phones network settings’ what does this mean for my control of the products?

This message occurs when there is no mobile data connection or a WiFi connection to your device. When this occurs, you will still be able to connect to your Bluetooth switches/dimmers as these just require Bluetooth to be enabled on your device. It will prevent access/control of Zigbee devices and IP Cameras as this requires access to the cloud/internet. Via WiFi, without internet, you may still get control of the Zigbee switches/dimmers but not the IP Cameras.
 

My Wiser switches are not responding to being pressed or control via Wiser by SE, what can I do to troubleshoot the issue?

Begin by taking note of the product/s that are not responding and are they doing anything else different from normal operation? For example, is the backlight flashing in a sequence, does the product respond to three presses and shows the pairing led colouring and what colours are seen. If what is suggested below does not resolve the switches not responding these details can assist the Tech Support team in diagnosing what is occurring.

Once this has been taken note of begin by power cycling your Wiser Hub. This can be done by removing the micro-USB where it connects to the Hub or by turning off the power outlet that supplies power to the Hub. Leave it off for 10 – 15 seconds and then reconnect the Wiser Hub and wait until it completes its reboot procedure at the end of which only 2 LED indicators should be visible on the Wiser Hub. With LEDs at top of Hub - if connected with Ethernet cable (Right and Left Led will turn ON). If connect via WiFi (Middle and Right Led will turn ON)

If this fails to resolve the issue the product failing to respond may need to be power cycled itself. If confidant and able, access the switchboard that has the RCBO’s or Circuit breakers that supply power to the products. Turn the applicable supply off for 10 – 15 seconds and then turn this supply back on.

Note: If uncertain contact your installing electrician for the Wiser system who may advise what is supplying power to the Wiser products. If fuses are installed in your switchboard it is recommended to have your electrician remove the fuse and then re-fit after 10 – 15 seconds. Fuses can be extremely dangerous if not correctly handled by a qualified electrician.

If the switches are still unresponsive contact Tech Support via phone – Australia: 13 73 28 (13 SEAU) New Zealand 0800 652 999, email - techsupport.pz@se.com or via online chat through a link on our support page https://www.clipsal.com/clipsal-support/contact-us or https://www.pdl.co.nz/support
 

What mechs are needed for 2-way switching in the Iconic range?

What are the differences between the 10AX (41E10PBSWM and 41E10PBSWMZ) and the 2AX (41E2PBSWM and 41E2PBSWMZ) Wiser switches?

10AX has the ability to include multiway switching with control links where the 2AX does not.
As per images below there is a size difference between the two mechanisms. This size difference shows that with the 10AX you are limited to the plates you can fit these to being 1 – 3 gang (or added to the centre of a 5-gang plate). The 10AX switch will fit into deep wall boxes and cavity walls.
The 2AX does not have this limitation and can fit 1 – 6 gang plates. It is also not as deep as the 10AX and can fit into most standard wall boxes. The 10AX switch will fit into deep wall boxes and cavity walls.
2AX in Bluetooth is unable to have schedules set and the 10AX in Bluetooth can.
As per the load tables the 10AX can handle larger loads when compared to the 2AX.
 
10AX
image.pngimage.png
2AX
image.pngimage.png
 

I have made name changes to my Wiser devices in Wiser by SE how can I get these changes to work with Google voice control?

When setting up Google home and voice control make sure that any changes that are made to devices in Wiser by SE in the naming of mechs or adding/removing items are done on the device that the speaker is linked within google home. Making sure to refresh the Google Home App after the changes are made in Wiser by SE.

The changes will not be recognized If they are done on a device that is not the creator of the Home within the Google Home App that is linked with the voice control speaker. This can be solved by having the creator refresh his Google Home.
Note: Only one Wiser by SE account should be linked with Google home per household. This person should then create the home within Google Home and add members to this home. If more than one Wiser by SE account in the same home is linked to Google Home this can create ‘doubles’ of the Wiser devices within the Google Home App.
 

How do I swap my Wiser connected switch and dimmer devices from BLE to Zigbee?

To swap from Bluetooth to Zigbee you will need to short press the mechanism 12 times - and allow time for the device to swap modes, this will take roughly 40 seconds. Initially when swapped to Zigbee mode the LED indicator on the mechanism will flash amber indicating it is in pairing mode. If not paired to after roughly 50 seconds this will become solid amber. This amber indicator will remain on until paired with a Hub, the mechanism will function as normal while this indicator is on.

NOTE: Before swapping from Bluetooth/BLE to Zigbee it is strongly recommended that a factory reset be performed on the mechanism before initiating the change.