C-Bus Control and Management System, Passive Infrared Sensor, 110 degrees

Home ProductsSmart Home SolutionsC-BusPassive Infrared Sensor

C-Bus Control and Management System, Passive Infrared Sensor, 110 degrees GY

Item Number: 5750WPL-GY

Datasheet

Product Dimensions

Width icon

Width74 mm

Height icon

Height111 mm

Depth icon

Depth138 mm

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

Australian Series|C-Bus

Range

C-Bus

Product brand

Clipsal

Product or component type

occupancy sensor

Device application

lighting

Sustainable offer status

Green Premium product

Physical

Sensor type

PIR

[ue] rated operational voltage

15...36 V DC

[in] rated current

18 mA

Communication network type

C-Bus 100

Number of channels

1

Type of setting

light sensitivity adjustable

Light intensity adjustment

1 lux user selectable

Local signalling

LED for status

Connections - terminals

2 flying leads

Device mounting

surface

Mounting support

wall|ceiling

Mounting height

2.4 m

Fixing center

84 mm

Width

74 mm

Height

111 mm

Depth

138 mm

Ip degree of protection

IP66

Ambient air temperature for operation

0...45 °C

Reach regulation

Reference contains Substances of Very High Concern above the threshold

Eu rohs directive

Compliant with Exemptions

Rohs exemption information

Yes

China rohs regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental disclosure

ENVPEP121002EN

Circularity profile

ENVEOLI121002EN

Material

Material

plastic

Others

Package 1 bare product quantity

1

Product specific application

staircase monitoring

Data backed up

non-volatile memory

Resolution

1 s

Starting time

5 s

Horizontal detection angle

0...110 °

Time delay range

0...1 s (switch-on)

Duty cycle

1090 min

Detection face

lateral: 12 m|frontal: 18 m

Unit type of package 1

PCE

Number of units in package 1

1

Package 1 height

12.6 cm

Package 1 width

17.6 cm

Package 1 length

24.8 cm

Package 1 weight

340 g

Unit type of package 2

CAR

Number of units in package 2

10

Package 2 height

18.2 cm

Package 2 width

30.8 cm

Package 2 length

45.3 cm

Package 2 weight

3.6 kg
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Other technical guide

  • Technical Data Catalogues

  • End of Life Manual

  • Environmental Disclosure

  • Operating Manuals

  • Declaration of Conformity

  • Software - Release

Frequently Asked Questions

hide show

How to use C-Bus sensor to trigger an ON/OFF scene store on a C-Bus switch?

Scenario: You want to use a C-Bus motion SENSOR to trigger a scene stored on another device i.e C-Bus switch when it turns ON and then trigger a second scene when it times OUT and turns OFF.

Mandatory: The C-Bus switch will need to have built in scene and virtual keys (switch firmware >= v2.0.00)

The motion detector to trigger scenes needs to utilise the secondary application (trigger control)

C-Bus Sensor secondary application is set to Trigger control and the Key1 is then select to set to trigger secondary application by clicking on the P(Primary application) it will change to S(secondary application).

1

The Trigger Group will need to be the same (common) to trigger both scenes - and its the value of the trigger group that acts as the action selector telling the triggered scene which action is being triggered.  

The scenes will be stored in a KEYE4. 

Action Selector 0 means that Scene 1 will trigger when Trigger Group 0 is at 0 (OFF) level and
Action Selector 255 means that Scene 2 will trigger when Trigger Group 0 is at 255 (ON) level.

2

3

4


 

How to Program "Absence Detection" on C-Bus outdoor PIR sensor?

Objective:
Absence detection sets the sensor to detect the absence of motion. If the lighting is on and the sensor detects the absence of motion, a timer is activated. When the timer expires and the sensor element still detects absence, a C-Bus command is sent to control lighting.
This article will guide you how to program “Absence Detection”, it will cover those C-Bus sensors, 5751L, 5750WPL and 5753L with the old firmware v1.2.67.

Product Line:
C-Bus Sensors: 5751L, 5750WPL and 5753L with the old firmware v1.2.67

Environment:
C-Bus Toolkit 1.15.5

Resolution:
  1. Open C-Bus Toolkit
  2. Scan the Network
  3. Double click the sensor to open its GUI
  4. Select a control group from the “Key 1 Group” dropdown list
  5. Define the Expiry Time (5 minutes assigned by default) and click “OK”
  6. Go to Key Functions tab and change the “On Key” on MD column for Short Press to “Idle”
  7. A Confirm-21000 message will pop up
  8. Click “YES” to accept the non-PIR functions
  9. Click “Apply” or “OK”
  10. Save to Database and Physical Unit