Harmony Control Relays Modular 1 phase current Control Relay 5 A, 2 CO, 0.15…15 A , 24…240 V AC/DC
Item Number: RM35JA32MW
Datasheet
Specifications
Design
Range of product
Product or component type
Warranty
Physical
Connections - terminals
[in] rated current
Marking
- CE : EMC 89/336/EEC
- CE : 73/23/EEC
Insulation resistance
- > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5
- > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1
- > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5
- > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1
- > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5
- > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
Connections - terminals
- screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
- screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
- screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
- screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
Local signalling
- LED (green) for power ON
- LED (yellow) for relay ON
Mounting support
Electrical durability
Mechanical durability
Width
Control type
Net weight
Standards
Product certifications
- GL
- UL
- GOST
- C-Tick
- CSA
Ambient air temperature for storage
Ambient air temperature for operation
Relative humidity
Ip degree of protection
- IP20 (terminals) conforming to IEC 60529
- IP30 (casing) conforming to IEC 60529
Reach regulation
Eu rohs directive
Mercury free
China rohs regulation
Environmental disclosure
Circularity profile
California proposition 65
Material
Contacts material
Others
Package 2 bare product quantity
Packaging made with recycled cardboard
Packaging without single use plastic
Package 1 bare product quantity
Relay type
Relay name
Relay monitored parameters
Time delay type
- adjustable 0.3...30 s, 0 + 10 % Tt- time delay upon fault
- adjustable 1...20 s, 0 + 10 % Ti- inhibition time delay upon startup
Switching capacity in va
Minimum switching current
Maximum switching current
Maximum power consumption in va
Measurement range
Utilisation category
- AC-12 conforming to IEC 60947-5-1
- AC-13 conforming to IEC 60947-5-1
- AC-14 conforming to IEC 60947-5-1
- AC-15 conforming to IEC 60947-5-1
- DC-12 conforming to IEC 60947-5-1
- DC-13 conforming to IEC 60947-5-1
- DC-14 conforming to IEC 60947-5-1
Contacts type and composition
[uc] control circuit voltage
Reset time
Maximum switching voltage
Supply voltage limits
Control circuit voltage limits
Maximum power consumption in w
Control circuit frequency
Resistance across terminals
- 0.005 Ohm at E3-M terminals
- 0.015 Ohm at E2-M terminals
- 0.05 Ohm at E1-M terminals
Output contacts
Nominal output current
Maximum measuring cycle
Hysteresis
Run-up delay at power-up
Measurement accuracy
Repeat accuracy
- +/- 0.5 % for input and measurement circuit
- +/- 2 % for time delay
Measurement error
- 0.05 %/°C with temperature variation
- 1 by volt over the whole range with voltage variation
Polarity
Threshold setting
Overvoltage category
[ui] rated insulation voltage
Operating position
Tightening torque
Housing material
Operating rate
[us] rated supply voltage
Safety reliability data
- MTTFd = 296.8 years
- B10d = 270000
Functionality
Compatibility code
Immunity to microbreaks
Electromagnetic compatibility
- emission standard for industrial environments conforming to IEC 61000-6-4
- emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3
- immunity for industrial environments conforming to NF EN/IEC 61000-6-2
Vibration resistance
- 0.35 mm (f= 5-57.6 Hz) conforming to IEC 60068-2-6
- 1 gn (f= 57.6-150 Hz) conforming to IEC 60255-21-1
Shock resistance
Pollution degree
Dielectric test voltage
- 2 kV, 1 min AC 50 Hz conforming to IEC 60255-5
- 2 kV, 1 min AC 50 Hz conforming to IEC 60664-1
Non-dissipating shock wave
- 4 kV conforming to IEC 60255-5
- 4 kV conforming to IEC 60664-1
- 4 kV conforming to IEC 61000-4-5
Unit type of package 1
Number of units in package 1
Package 1 height
Package 1 width
Package 1 length
Package 1 weight
Unit type of package 2
Number of units in package 2
Package 2 height
Package 2 width
Package 2 length
Package 2 weight
Green premium status for reporting
Sustainable packaging
Weee
Take-back
Take-back
Product contributes to saved and avoided emissions
Removable battery
Carbon footprint (kg.eq.co2 per cr, total life cycle)
Global warming ; total life cycle
Minimum percentage of recycled plastic content
Documents & downloads
hide show-
All
-
CAD Files and Packs
-
Technical Data Catalogues
-
Installation Instruction
-
End of Life Manual
-
Technical illustration
-
Application Notes
-
eTechPub
-
Certificates (MSDS)
-
Declaration of Conformity
CNCA-CCC RM35
VERSION
1.0
DATE
19 Sep 2024
REVISION
1.0
UL Listed RM17, RM22, RM35, RM8487
VERSION
1.0
DATE
13 Sep 2024
REVISION
1.0
CSA Certificate RM17, RM22, RM35, RM8487
VERSION
1.0
DATE
13 Sep 2024
REVISION
1.0
DNVGL Certificate RM17 RM35
VERSION
1.0
DATE
23 Feb 2024
REVISION
1.0
Frequently Asked Questions
hide showHow do you adjust the RM35JA32MW?
Product Line:
Current measurement relay
Environment:
RM35JA31MW, RM35JA32MW
Cause:
Need instructions to set up relay.
Resolution:
See attached instruction sheet.
