ws226ssr/3-rg sunset switch 3wire 10ax

Switch, Weathershield, 3-Wire, 240VAC, 10A

Catalogue Number: WS226SSR/3
ws226ssr/3-rg sunset switch 3wire 10ax
Colour: Resistant Grey
Colour: Per UOM Std.
  • Resistant Grey 1 PCE
Added to cart

Specifications

hide show
Range of product
Weathershield
Product brand
Clipsal
Device presentation
basic element
Fixing mode
by screws
Local signalling
without
[Ue] rated operational voltage
240 V AC
Rated current
  • 10 A
  • 10 AX, fluorescent lamp
    • Marking
      without marking
      Standards
    • AS/NZS 3133
    • AS/NZS 3100
    • IEC 60669-2-1
      • EU RoHS Directive
        Compliant

        Frequently Asked Questions

        hide show

        Can you adjust the Lux level on the WS226SSR/3?

        Yes the Lux level is adjustable between 20 to 500 Lux.

        Some of the key features are:

        • Timer and light level setup option
        • Dimensions: 85 x 85 x 64 mm
        • Timer setting range: 2H, 4H, 6H, 8H, 12H, Default setting: DD (Dusk to Dawn)
        • Light intensity setting range: 20-500 lux, Default setting approximately: 20 lux
        • Operating temperature: 0 - 45 deg C
        • 3-Wire
        For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=WS226SSR/3

        What is the replacement for a 4LSS?

        The closest alternative is a WS226SSR/3. Please note this is surface mount not Din rail mount. This unit has different operating characteristics and is not a direct replacement.

        What is the part number for your sun set switch?

        The part number for our sun set switch is WS226SSR/2 or WS226SSR/3.

        Some of the key features are:
        • Dimensions: 85 x 85 x 64 mm
        • Timer setting range: 2H, 4H, 6H, 8H, 12H, Default setting: DD (Dusk to Dawn)
        • Light intensity setting range: 20-500 lux, Default setting approximately: 20 lux

        For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=WS226SSR/3
         

        What is the replacement part number for WDL10?

        The replacement part number for WDL10 is - WS226SSR/3
        For further information , visit link below:-
        https://www.clipsal.com/Trade/search-results?q=WS226SSR/3
        User-added image

        Where should the Load correction devices 31CAP and S31LCDA be used?

        The 31CAP is to be use with the following two wire products
        Infrascan 750WP, 751, 753.
        Timer 31VETR
        Sunset Switch WS226SSR/2, 56SSR/2, 31VSSR/2

        The S31LCDA is suitable for use with Clipsal & Schneider Electric 2-Wire, mains powered Dimmers that use
        Leading Edge, Trailing Edge and Universal Dimming.
        Other Suitable loads: Dimmable CFL/ Dimmable LED with Electronic control

        (Load correction Devices may not correct all problems)
        Installation Instructions can be found on the Clipsal.com Website.
         

        What is the part number for a WS226 with an intermediate mechanism?

        The part number for a WS226 with an intermediate mecanism is WS226I-RG.

        What is the alternative for WS226D-GY ?

        The correct part code = WS226D-RG