MASTER YOUR CASTLE with your new build or reno project

Enter competition
DETAILS PRIZES T&CS

Building or Renovating?

Master your castle with the ultimate electrical and smart home package, valued at $20,000, for your new build or reno project.

Click on the link below to enter your details for your chance to WIN!

Complete your details

Your Details

Enter the prize draw

Thanks for entering

The lucky winner will be notified by phone and email on 27th November 2019.

Why not spread the word and increase your chances of winning? Each social media share will earn you an extra entry into the draw and bring Clipsal by Schneider Electric another step closer to empowering a community in need.

The competition has now closed.

The winning entry will be drawn Tuesday 27 November 2019 at 2.00pm (AEST).
The winner’s name will be published in The Australian newspaper on Saturday 1st December 2019, but will also be contacted via email and phone on the day of the draw.

We've got the winner!

 

What do you need to 'Master Your Castle'?

Clipsal's Master Your Castle promotion gives you the chance to go into the running to win an ultimate home electrical and smart home package. Whether you are building your dream home or renovating your much loved house, winning this house lot of Clipsal products will help you master your castle.

Default
house lot of clipsal products

Receive a Clipspec consultation to design the ultimate customised electrical package, tailor-made for your home.

Walk through your house plans with an expert and select $15,000 worth of Clipsal electrical products. Choose from: LED downlights, exterior wall lights, floodlights, switches, dimmers, power points, bluetooth speakers, motion sensors, smoke alarms, ceiling fans, smart home solutions, or anything else Clipsal has to offer. Then receive $5,000 towards the installation of your selected products.

TERMS AND CONDITIONS

  1. Information on how to enter and the prizes forms part of these Terms and Conditions.
  2. Participation in this promotion is deemed acceptance of these Terms and Conditions.
  3. The Promotional Period commences on Friday 29 March 2019 10.00am (AEST) and closes on Wednesday 20 November 2019 at 9.00pm (AEST).
  4. Entry is open to Australian residents over the age of 18 only.
  5. There is a limit of one entry per person, unless the promoter offers additional entries via a social media promotion, in which case, additional entries will be automatically added on the participants behalf by the promoter.
  6. Employees (and their immediate families) of the Promoter(s) and associated agencies are ineligible to enter. Immediate family means any of the following: spouse, ex-spouse, defacto spouse, child or step-child (whether natural or by adoption), parent, step-parent, grandparent, step-grandparent, uncle, aunt, niece, nephew, brother, sister, step-brother, step-sister or first cousin.
  7. To enter, individuals must, during the Promotional Period:
    1. Visit the ‘Clipsal at Home’ web page, or any of its linked pages and fill in all required fields of the competition form that will appear as a pop up option.
    2. Or sign up at the Clipsal stand at the Sydney HIA Home Show 5-7 th April: ICC Sydney, Darling Harbour.
    3. Or sign up via ROKT lead generation promotion.
    4. Or opt in using the Clipsal Smart Home Selector tool.
  8. There is one major prize to be won, consisting of the winners choice of Clipsal home electrical and smart home products. The major prize has a total value of approximately $20,000, including approx. $15,000 worth of Clipsal home electrical or smart home products and $5,000 towards the cost of installing the products. The $15,000 worth of Clipsal products is chosen by the winner. The winner will be contacted by a Clipsal Consumer Support Agent within two weeks of the prize being drawn to arrange a compulsory consultation with a Clipspec Consultant, at which time a customised prize package (up to the value of $15,000) will be created. The $5,000 towards the cost of installing the products will be awarded to the winner in the form of prepaid VISA gift cards, with the intention that it will be used to pay the electrical contractor conducting the install at the appropriate time.
  9. The winner will be selected via registered electronic draw Approval No: 1224 at Schneider Electric Adelaide Office: 33 – 37 Port Wakefield Road Gepps Cross on Wednesday 27 November 2019 at 2.00pm (AEST).
  10. The winners will be notified by telephone and in writing by a Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  11. The winners name will be published in The Australian newspaper on Saturday 30th November 2019.
  12. By entering the competition and agreeing to these terms and conditions, the winner automatically consents to approval of a case study showcasing the Clipsal solutions selected for installation. This will involve an interview with a Clipsal representative (either in person or via phone) and photographs/videos being taken of their home (at no cost to them). The results of this will be presented in the form of a written story with video imagery to accompany which can be used in any form of media or promotional purposes for an unlimited amount of time (see clause 21).
  13. The Promoter reserves the right, at any time, to verify the validity of entries, registrations and entrants (including an entrant’s identity, age and place of residence) and to disqualify any entrant who submits an entry or registration that is not in accordance with these Terms and Conditions or who tampers with the entry/registration process. Errors and omissions may be accepted at the Promoter's discretion. Failure by the Promoter to enforce any of its rights at any stage does not constitute a waiver of those rights.
  14. Subject to the unclaimed prize draw clause, if for any reason a winner does not take a prize by the time stipulated by the Promoter, then the prize will be forfeited.
  15. If any prize is unavailable, the Promoter, in its discretion, reserves the right to substitute the prize with a prize to the equal value and/or specification, subject to the relevant authorities.
  16. Unclaimed Prize Draw: The winners are given 3 months to claim their prize. Should it necessary a redraw will take place for all unclaimed prizes on Friday 28th February 2020 at Clipsal by Schneider Electric Adelaide Office (33-37 Port Wakefield Road, Gepps Cross, SA 5094) at 2.00pm (AEST). The winner will be notified by telephone and in writing by a Schneider Electric or Clipsal by Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  17. The redrawn winners name will be published in The Australian newspaper on Friday 6th March 2020.
  18. The Prize is not transferable or exchangeable and cannot be taken as cash.
  19. If a Prize is not available for any reason, the Promoter may substitute an alternative prize to at least the value and of a similar standard as the Prize that is not available.
  20. The promoter makes no representation or warranty about the fitness for purpose or merchantable quality of the Prize.
  21. Entrants consent to the Promoter using their name and/or image in the event they are a winner in any media for an unlimited period without remuneration for its promotional and publicity purposes.
  22. The Promoter may, subject to any written directions from a regulatory authority, modify, suspend, terminate or cancel the promotion, as appropriate.
  23. The Promoter collects personal information in order to conduct the promotion and may, for this purpose, disclose such information to third parties, including but not limited to agents, contractors, service providers, prize suppliers and, as required, to Australian regulatory authorities. Entry is conditional on providing this information. The Promoter may, for an indefinite period, unless otherwise advised, use the information for promotional, marketing, publicity, research and profiling purposes, including sending electronic messages or telephoning the Eligible Entrant. Eligible Entrants should direct any request to opt out, access, update or correct information to the Promoter. All entries become the property of the Promoter.
  24. The Promoter’s and judges’ decision is final and no correspondence will be entered into.
  25. If this promotion is interfered with in any way or is not capable of being conducted as reasonably anticipated due to any reason beyond the reasonable control of the Promoter, including but not limited to technical difficulties, unauthorised intervention or fraud, the Promoter reserves the right, in its sole discretion, to the fullest extent permitted by law (a) to disqualify any entrant; or (b) subject to any written directions from a regulatory authority, to modify, suspend, terminate or cancel the promotion, as appropriate.
  26. Nothing in these Terms and Conditions limits, excludes or modifies or purports to limit, exclude or modify the statutory consumer guarantees as provided under the Competition and Consumer Act, as well as any other implied warranties under similar consumer protection laws in the State and Territories of Australia (Non-Excludable Guarantees). Except for any liability that cannot by law be excluded, including the Non-Excludable Guarantees, the Promoter (including its respective officers, employees and agents) is not responsible for and excludes all liability for any personal injury or any loss or damage whether direct, indirect, special or consequential arising in any way out of the promotion or use of a Prize.
  27. The Promoter is Schneider Electric (Australia) Pty Ltd (ABN 42 004 969 304) of 78 Waterloo Rd, Macquarie Park, NSW 2113.
Variable speed drive Altivar 71 UL type 1/IP20 three-phase supply voltage: 380…480V 50/60 Hz, 11 kW 15 HP

ATV71HD15N4

Altivar 71 15KW 33A 480V 3PH EMC IP20

Variable speed drive Altivar 71 UL type 1/IP20 three-phase supply voltage: 380…480V 50/60 Hz, 11 kW 15 HP
Colour:
Colour: Per UOM Std.
  • 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
Range of product
Altivar 71
Product or component type
variable speed drive
Product specific application
complex, high-power machines
Component name
ATV71
Motor power kW
15 kW, 3 phases at 380...480 V
Motor power hp
20 hp, 3 phases at 380...480 V
Maximum motor cable length
  • 50 m shielded cable
  • 100 m unshielded cable
    • [Us] rated supply voltage
      380...480 V - 15...10 %
      Network number of phases
      3 phases
      Line current
    • 39 A for 480 V 3 phases 15 kW / 20 hp
    • 48 A for 380 V 3 phases 15 kW / 20 hp
      • EMC filter
        integrated
        Assembly style
        with heat sink
        Apparent power
        31.6 kVA at 380 V 3 phases 15 kW / 20 hp
        Prospective line Isc
        22 kA for 3 phases
        Nominal output current
      • 27 A at 4 kHz 460 V 3 phases 15 kW / 20 hp
      • 33 A at 4 kHz 380 V 3 phases 15 kW / 20 hp
        • Maximum transient current
        • 49.5 A for 60 s 3 phases 15 kW / 20 hp
        • 54.5 A for 2 s 3 phases 15 kW / 20 hp
          • Output frequency
            0.1-599 Hz
            Nominal switching frequency
            4 kHz
            Switching frequency
          • 1...16 kHz adjustable
          • 4...16 kHz with derating factor
            • Asynchronous motor control profile
            • ENA (Energy adaptation) system for unbalanced loads
            • sensorless flux vector control (SFVC) (voltage or current vector)
            • flux vector control (FVC) with sensor (current vector)
            • voltage/frequency ratio (2 or 5 points)
              • Type of polarization
                no impedance for Modbus
                Product destination
              • synchronous motors
              • asynchronous motors
                • Supply voltage limits
                  323-528 V
                  Supply frequency
                  50...60 Hz - 5...5 %
                  Network frequency
                  47.5...63 Hz
                  Speed range
                • 1-100 for asynchronous motor in open-loop mode, without speed feedback
                • 1-1000 for asynchronous motor in closed-loop mode with encoder feedback
                • 1-50 for synchronous motor in open-loop mode, without speed feedback
                  • Speed accuracy
                  • +/- 0.01 % of nominal speed in closed-loop mode with encoder feedback 0.2 Tn to Tn
                  • +/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn
                    • Torque accuracy
                    • +/- 15 % in open-loop mode, without speed feedback
                    • +/- 5 % in closed-loop mode with encoder feedback
                      • Transient overtorque
                      • 170-170 % of nominal motor torque +/- 10 % for 60 s every 10 minutes
                      • 220-220 % of nominal motor torque +/- 10 % for 2 s
                        • Braking torque
                        • <= 150 % with braking or hoist resistor
                        • 30 % without braking resistor
                          • Synchronous motor control profile
                            vector control without speed feedback
                            Regulation loop
                            adjustable PI regulator
                            Motor slip compensation
                          • adjustable
                          • not available in voltage/frequency ratio (2 or 5 points)
                          • automatic whatever the load
                          • suppressable
                            • Local signalling
                              drive voltage: 1 LED (red)
                              Output voltage
                              <= power supply voltage
                              Insulation
                              electrical between power and control
                              Type of cable
                            • with a NEMA Type1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC
                            • with an IP21 or an IP31 kit: 3 wire(s)IEC cable at 40 °C, copper 70 °C / PVC
                            • without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC
                            • without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR
                              • Electrical connection
                              • terminal, clamping capacity: 2.5 mm², AWG 14 (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
                              • terminal, clamping capacity: 35 mm², AWG 2 (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
                                • Tightening torque
                                • 0.6 N.m (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
                                • 5.4 N.m, 47.7 lb.in (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
                                  • Supply
                                  • internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
                                  • internal supply: 24 V DC (21-27 V), <200 mA, protection type: overload and short-circuit protection
                                    • Analogue input number
                                      2
                                      Analogue input type
                                    • AI1-/Al1+ bipolar differential voltage: +/- 10 V DC 24 V max, resolution 11 bits + sign
                                    • AI2 software-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits
                                    • AI2 software-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits
                                      • Sampling duration
                                      • 2 ms +/- 0.5 ms (AI1-/Al1+) - analog input(s)
                                      • 2 ms +/- 0.5 ms (Al2) - analog input(s)
                                      • 2 ms +/- 0.5 ms (LI1...LI5) - discrete input(s)
                                      • 2 ms +/- 0.5 ms (LI6)if configured as logic input - discrete input(s)
                                        • Response time
                                        • <= 100 ms in STO (Safe Torque Off)
                                        • AO1 2 ms, tolerance +/- 0.5 ms for analog output(s)
                                        • R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms for discrete output(s)
                                        • R2A, R2B 7 ms, tolerance +/- 0.5 ms for discrete output(s)
                                          • Accuracy
                                          • +/- 0.6 % (AI1-/Al1+) for a temperature variation 60 °C
                                          • +/- 0.6 % (AI2) for a temperature variation 60 °C
                                          • +/- 1 % (AO1) for a temperature variation 60 °C
                                            • Linearity error
                                            • +/- 0.15 % of maximum value (AI1-/Al1+, AI2)
                                            • +/- 0.2 % (AO1)
                                              • Analogue output number
                                                1
                                                Analogue output type
                                              • AO1 software-configurable logic output 10 V 20-20 mA
                                              • AO1 software-configurable current 0...20 mA, impedance: 500 Ohm, resolution 10 bits
                                              • AO1 software-configurable voltage 0...10 V DC, impedance: 470 Ohm, resolution 10 bits
                                                • Discrete output number
                                                  2
                                                  Discrete output type
                                                • configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles
                                                • configurable relay logic: (R2A, R2B) NO - 100000 cycles
                                                  • Minimum switching current
                                                    3 mA at 24 V DC for configurable relay logic
                                                    Maximum switching current
                                                  • R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4
                                                  • R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4
                                                  • R1, R2: 5 A at 250 V AC resistive load, cos phi = 1
                                                  • R1, R2: 5 A at 30 V DC resistive load, cos phi = 1
                                                    • Discrete input number
                                                      7
                                                      Discrete input type
                                                    • LI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm
                                                    • LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm
                                                    • LI6: switch-configurable PTC probe 0-6 , impedance: 1500 Ohm
                                                    • PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d
                                                      • Discrete input logic
                                                      • negative logic (sink) (LI1...LI5), > 16 V (state 0), < 10 V (state 1)
                                                      • positive logic (source) (LI1...LI5), < 5 V (state 0), > 11 V (state 1)
                                                      • negative logic (sink) (LI6)if configured as logic input, > 16 V (state 0), < 10 V (state 1)
                                                      • positive logic (source) (LI6)if configured as logic input, < 5 V (state 0), > 11 V (state 1)
                                                        • Acceleration and deceleration ramps
                                                        • automatic adaptation of ramp if braking capacity exceeded, by using resistor
                                                        • linear adjustable separately from 0.01 to 9000 s
                                                        • S, U or customized
                                                          • Braking to standstill
                                                            by DC injection
                                                            Protection type
                                                          • against exceeding limit speed: drive
                                                          • short-circuit between motor phases: drive
                                                          • thermal protection: drive
                                                          • motor phase break: motor
                                                          • power removal: motor
                                                          • thermal protection: motor
                                                          • against input phase loss: drive
                                                          • break on the control circuit: drive
                                                          • input phase breaks: drive
                                                          • line supply overvoltage: drive
                                                          • line supply undervoltage: drive
                                                          • overcurrent between output phases and earth: drive
                                                          • overheating protection: drive
                                                          • overvoltages on the DC bus: drive
                                                            • Insulation resistance
                                                              > 1 mOhm 500 V DC for 1 minute to earth
                                                              Frequency resolution
                                                            • analog input: 0.024/50 Hz
                                                            • display unit: 0.1 Hz
                                                              • Communication port protocol
                                                              • Modbus
                                                              • CANopen
                                                                • Connector type
                                                                • 1 RJ45 (on front face) for Modbus
                                                                • 1 RJ45 (on terminal) for Modbus
                                                                • male SUB-D 9 on RJ45 for CANopen
                                                                  • Physical interface
                                                                    2-wire RS 485 for Modbus
                                                                    Transmission frame
                                                                    RTU for Modbus
                                                                    Transmission rate
                                                                  • 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal
                                                                  • 9600 bps, 19200 bps for Modbus on front face
                                                                  • 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
                                                                    • Data format
                                                                    • 8 bits, 1 stop, even parity for Modbus on front face
                                                                    • 8 bits, odd even or no configurable parity for Modbus on terminal
                                                                      • Number of addresses
                                                                      • 1-127 for CANopen
                                                                      • 1-247 for Modbus
                                                                        • Method of access
                                                                          slave CANopen
                                                                          Marking
                                                                          CE
                                                                          Operating position
                                                                          vertical +/- 10 degree
                                                                          Height
                                                                          400 mm
                                                                          Depth
                                                                          213 mm
                                                                          Width
                                                                          230 mm
                                                                          Net weight
                                                                          13 kg
                                                                          Functionality
                                                                          full
                                                                          Specific application
                                                                          other applications
                                                                          Option card
                                                                        • communication card for CC-Link
                                                                        • communication card for Modbus TCP
                                                                        • communication card for Modbus/Uni-Telway
                                                                        • overhead crane card
                                                                        • communication card for Profibus DP
                                                                        • communication card for Profibus DP V1
                                                                        • controller inside programmable card
                                                                        • communication card for DeviceNet
                                                                        • communication card for Ethernet/IP
                                                                        • communication card for Fipio
                                                                        • I/O extension card
                                                                        • communication card for Interbus-S
                                                                        • interface card for encoder
                                                                        • communication card for Modbus Plus
                                                                          • Noise level
                                                                            60.2 dB conforming to 86/188/EEC
                                                                            Dielectric strength
                                                                          • 3535 V DC between earth and power terminals
                                                                          • 5092 V DC between control and power terminals
                                                                            • Electromagnetic compatibility
                                                                            • 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
                                                                            • conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
                                                                            • electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
                                                                            • electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
                                                                            • radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
                                                                            • voltage dips and interruptions immunity test conforming to IEC 61000-4-11
                                                                              • Standards
                                                                              • EN 61800-3 environments 2 category C3
                                                                              • IEC 60721-3-3 class 3S2
                                                                              • EN 55011 class A group 2
                                                                              • IEC 60721-3-3 class 3C1
                                                                              • EN 61800-3 environments 1 category C3
                                                                              • UL Type 1
                                                                              • EN/IEC 61800-5-1
                                                                              • EN/IEC 61800-3
                                                                                • Product certifications
                                                                                • CSA
                                                                                • UL
                                                                                • C-Tick
                                                                                • NOM 117
                                                                                • GOST
                                                                                  • Pollution degree
                                                                                    2 conforming to EN/IEC 61800-5-1
                                                                                    IP degree of protection
                                                                                    IP20
                                                                                    Vibration resistance
                                                                                  • 1 gn (f= 13-200 Hz) conforming to EN/IEC 60068-2-6
                                                                                  • 1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6
                                                                                    • Shock resistance
                                                                                      15 gn for 11 ms conforming to EN/IEC 60068-2-27
                                                                                      Relative humidity
                                                                                    • 5-95 % without condensation conforming to IEC 60068-2-3
                                                                                    • 5-95 % without dripping water conforming to IEC 60068-2-3
                                                                                      • Ambient air temperature for operation
                                                                                        -10-50 °C (without)
                                                                                        Ambient air temperature for storage
                                                                                        -25-70 °C
                                                                                        Operating altitude
                                                                                      • <= 1000 m without
                                                                                      • 1000...3000 m with current derating 1 % per 100 m
                                                                                        • Sustainable offer status
                                                                                          Green Premium product
                                                                                          REACh Regulation
                                                                                          Reference contains Substances of Very High Concern above the threshold
                                                                                          EU RoHS Directive
                                                                                          Pro-active compliance (Product out of EU RoHS legal scope)
                                                                                          Mercury free
                                                                                          Yes
                                                                                          RoHS exemption information
                                                                                          Yes
                                                                                          China RoHS Regulation
                                                                                          X
                                                                                          Environmental Disclosure
                                                                                          ENVPEP050303EN
                                                                                          Circularity Profile
                                                                                          ENVEOLI100207EN
                                                                                          WEEE
                                                                                          The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
                                                                                          Warranty
                                                                                          18 months

                                                                                          Documents & downloads

                                                                                          hide show
                                                                                          Filter items
                                                                                          • All

                                                                                          • CAD Files and Packs

                                                                                          • Product Brochures

                                                                                          • Movies

                                                                                          • Technical Data Catalogues

                                                                                          • Catalog Page

                                                                                          • Technical Leaflet

                                                                                          • End of Life Manual

                                                                                          • Installation Instruction

                                                                                          • Handout

                                                                                          • Data Bulletin

                                                                                          • Product Environmental

                                                                                          • Operating Manuals

                                                                                          • System User Guide

                                                                                          • Specifications

                                                                                          • Specification for Tender

                                                                                          • Application Solutions

                                                                                          • Case Studies

                                                                                          • Certificates (MSDS)

                                                                                          • Marine Certificate

                                                                                          • eTechPub

                                                                                          • White Paper

                                                                                          • DTM Files

                                                                                          • Software - Released

                                                                                          • Software - Updates

                                                                                          • EDS Files

                                                                                          • GSD files