MASTER YOUR CASTLE with your new build or reno project
Enter competition

Building or Renovating?

Master your castle with the ultimate electrical and smart home package, valued at $20,000, for your new build or reno project.

Click on the link below to enter your details for your chance to WIN!

Complete your details

Your Details

Enter the prize draw

Thanks for entering

The lucky winner will be notified by phone and email on 27th November 2019.

Why not spread the word and increase your chances of winning? Each social media share will earn you an extra entry into the draw and bring Clipsal by Schneider Electric another step closer to empowering a community in need.

The competition has now closed.

The winning entry will be drawn Tuesday 27 November 2019 at 2.00pm (AEST).
The winner’s name will be published in The Australian newspaper on Saturday 1st December 2019, but will also be contacted via email and phone on the day of the draw.

We've got the winner!


What do you need to 'Master Your Castle'?

Clipsal's Master Your Castle promotion gives you the chance to go into the running to win an ultimate home electrical and smart home package. Whether you are building your dream home or renovating your much loved house, winning this house lot of Clipsal products will help you master your castle.

Receive a Clipspec consultation to design the ultimate customised electrical package, tailor-made for your home.

Walk through your house plans with an expert and select $15,000 worth of Clipsal electrical products. Choose from: LED downlights, exterior wall lights, floodlights, switches, dimmers, power points, bluetooth speakers, motion sensors, smoke alarms, ceiling fans, smart home solutions, or anything else Clipsal has to offer. Then receive $5,000 towards the installation of your selected products.


  1. Information on how to enter and the prizes forms part of these Terms and Conditions.

  2. Participation in this promotion is deemed acceptance of these Terms and Conditions.

  3. The Promotional Period commences on Friday 29 March 2019 10.00am (AEST) and closes on Wednesday 20 November 2019 at 9.00pm (AEST).
  4. Entry is open to Australian residents over the age of 18 only.
  5. There is a limit of one entry per person, unless the promoter offers additional entries via a social media promotion, in which case, additional entries will be automatically added on the participants behalf by the promoter.
  6. Employees (and their immediate families) of the Promoter(s) and associated agencies are ineligible to enter. Immediate family means any of the following: spouse, ex-spouse, defacto spouse, child or step-child (whether natural or by adoption), parent, step-parent, grandparent, step-grandparent, uncle, aunt, niece, nephew, brother, sister, step-brother, step-sister or first cousin.
  7. To enter, individuals must, during the Promotional Period:
    1. Visit the ‘Clipsal at Home’ web page, or any of its linked pages and fill in all required fields of the competition form that will appear as a pop up option.
    2. Or sign up at the Clipsal stand at the Sydney HIA Home Show 5-7 th April: ICC Sydney, Darling Harbour.
    3. Or sign up via ROKT lead generation promotion.
    4. Or opt in using the Clipsal Smart Home Selector tool.
  8. There is one major prize to be won, consisting of the winners choice of Clipsal home electrical and smart home products. The major prize has a total value of approximately $20,000, including approx. $15,000 worth of Clipsal home electrical or smart home products and $5,000 towards the cost of installing the products. The $15,000 worth of Clipsal products is chosen by the winner. The winner will be contacted by a Clipsal Consumer Support Agent within two weeks of the prize being drawn to arrange a compulsory consultation with a Clipspec Consultant, at which time a customised prize package (up to the value of $15,000) will be created. The $5,000 towards the cost of installing the products will be awarded to the winner in the form of prepaid VISA gift cards, with the intention that it will be used to pay the electrical contractor conducting the install at the appropriate time.
  9. The winner will be selected via registered electronic draw Approval No: 1224 at Schneider Electric Adelaide Office: 33 – 37 Port Wakefield Road Gepps Cross on Wednesday 27 November 2019 at 2.00pm (AEST).
  10. The winners will be notified by telephone and in writing by a Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  11. The winners name will be published in The Australian newspaper on Saturday 30th November 2019.
  12. By entering the competition and agreeing to these terms and conditions, the winner automatically consents to approval of a case study showcasing the Clipsal solutions selected for installation. This will involve an interview with a Clipsal representative (either in person or via phone) and photographs/videos being taken of their home (at no cost to them). The results of this will be presented in the form of a written story with video imagery to accompany which can be used in any form of media or promotional purposes for an unlimited amount of time (see clause 21).
  13. The Promoter reserves the right, at any time, to verify the validity of entries, registrations and entrants (including an entrant’s identity, age and place of residence) and to disqualify any entrant who submits an entry or registration that is not in accordance with these Terms and Conditions or who tampers with the entry/registration process. Errors and omissions may be accepted at the Promoter's discretion. Failure by the Promoter to enforce any of its rights at any stage does not constitute a waiver of those rights.
  14. Subject to the unclaimed prize draw clause, if for any reason a winner does not take a prize by the time stipulated by the Promoter, then the prize will be forfeited.
  15. If any prize is unavailable, the Promoter, in its discretion, reserves the right to substitute the prize with a prize to the equal value and/or specification, subject to the relevant authorities.
  16. Unclaimed Prize Draw: The winners are given 3 months to claim their prize. Should it necessary a redraw will take place for all unclaimed prizes on Friday 28th February 2020 at Clipsal by Schneider Electric Adelaide Office (33-37 Port Wakefield Road, Gepps Cross, SA 5094) at 2.00pm (AEST). The winner will be notified by telephone and in writing by a Schneider Electric or Clipsal by Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  17. The redrawn winners name will be published in The Australian newspaper on Friday 6th March 2020.
  18. The Prize is not transferable or exchangeable and cannot be taken as cash.
  19. If a Prize is not available for any reason, the Promoter may substitute an alternative prize to at least the value and of a similar standard as the Prize that is not available.
  20. The promoter makes no representation or warranty about the fitness for purpose or merchantable quality of the Prize.
  21. Entrants consent to the Promoter using their name and/or image in the event they are a winner in any media for an unlimited period without remuneration for its promotional and publicity purposes.
  22. The Promoter may, subject to any written directions from a regulatory authority, modify, suspend, terminate or cancel the promotion, as appropriate.
  23. The Promoter collects personal information in order to conduct the promotion and may, for this purpose, disclose such information to third parties, including but not limited to agents, contractors, service providers, prize suppliers and, as required, to Australian regulatory authorities. Entry is conditional on providing this information. The Promoter may, for an indefinite period, unless otherwise advised, use the information for promotional, marketing, publicity, research and profiling purposes, including sending electronic messages or telephoning the Eligible Entrant. Eligible Entrants should direct any request to opt out, access, update or correct information to the Promoter. All entries become the property of the Promoter.
  24. The Promoter’s and judges’ decision is final and no correspondence will be entered into.
  25. If this promotion is interfered with in any way or is not capable of being conducted as reasonably anticipated due to any reason beyond the reasonable control of the Promoter, including but not limited to technical difficulties, unauthorised intervention or fraud, the Promoter reserves the right, in its sole discretion, to the fullest extent permitted by law (a) to disqualify any entrant; or (b) subject to any written directions from a regulatory authority, to modify, suspend, terminate or cancel the promotion, as appropriate.
  26. Nothing in these Terms and Conditions limits, excludes or modifies or purports to limit, exclude or modify the statutory consumer guarantees as provided under the Competition and Consumer Act, as well as any other implied warranties under similar consumer protection laws in the State and Territories of Australia (Non-Excludable Guarantees). Except for any liability that cannot by law be excluded, including the Non-Excludable Guarantees, the Promoter (including its respective officers, employees and agents) is not responsible for and excludes all liability for any personal injury or any loss or damage whether direct, indirect, special or consequential arising in any way out of the promotion or use of a Prize.
  27. The Promoter is Schneider Electric (Australia) Pty Ltd (ABN 42 004 969 304) of 78 Waterloo Rd, Macquarie Park, NSW 2113.
ATV32   1 HP 240V 1 PHASE
Variable speed drive ATV32, 1P, with heat sink, size 1
ATV32   1 HP 240V 1 PHASE
Variable speed drive ATV32, 1P, with heat sink, size 1



Altivar 32, 200V, 0.75 Kw Variable Speed Drives

ATV32   1 HP 240V 1 PHASE
Variable speed drive ATV32, 1P, with heat sink, size 1
ATV32   1 HP 240V 1 PHASE
Variable speed drive ATV32, 1P, with heat sink, size 1
Colour: Per UOM Std.
  • 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
Range of product
Altivar 32
Product or component type
variable speed drive
Product destination
  • asynchronous motors
  • synchronous motors
    • Product specific application
      complex machines
      Function available
      Assembly style
      with heat sink
      Component name
      EMC filter
      Class C2 EMC filter integrated
      Network number of phases
      1 phase
      [Us] rated supply voltage
      200...240 V - 15...10 %
      Supply voltage limits
      170-264 V
      Supply frequency
      50...60 Hz - 5...5 %
      Network frequency
      47.5...63 Hz
      Motor power kW
      0.75 kW at 200...240 V
      Motor power hp
      1 hp at 200...240 V
      Line current
    • 10.1 A for 200 V 1 phase 0.75 kW / 1 hp
    • 8.5 A for 240 V 1 phase 0.75 kW / 1 hp
      • Apparent power
        2 kVA at 240 V 1 phase 0.75 kW / 1 hp
        Prospective line Isc
        1 kA for 1 phase
        Nominal output current
        4.8 A at 4 kHz 240 V 0.75 kW / 1 hp
        Maximum transient current
        7.2 A for 60 s 0.75 kW / 1 hp
        Output frequency
        5.0E-4-0.599 kHz
        Nominal switching frequency
        4 kHz
        Switching frequency
        2...16 kHz adjustable
        Speed range
        1-100 for asynchronous motor in open-loop mode
        Speed accuracy
        +/- 10 % of nominal slip 0.2 Tn to Tn
        Torque accuracy
        +/- 15 %
        Transient overtorque
        170-200 %
        Braking torque
        <= 170 % with braking resistor
        Asynchronous motor control profile
      • voltage/frequency ratio - Energy Saving, quadratic U/f
      • flux vector control without sensor - Energy Saving, NoLoad law
      • flux vector control without sensor, standard
      • voltage/frequency ratio, 5 points
      • voltage/frequency ratio, 2 points
        • Synchronous motor control profile
          vector control without sensor
          Regulation loop
          adjustable PID regulator
          Motor slip compensation
        • adjustable 0...300 %
        • automatic whatever the load
        • not available in voltage/frequency ratio (2 or 5 points)
          • Local signalling
          • 1 LED red for drive voltage
          • 1 LED green for CANopen run
          • 1 LED red for CANopen error
          • 1 LED red for drive fault
            • Output voltage
              <= power supply voltage
              Noise level
              43 dB conforming to 86/188/EEC
              electrical between power and control
              Electrical connection
            • screw terminal, clamping capacity: 0.5...1.5 mm², AWG 18...AWG 14 (control)
            • removable screw terminals, clamping capacity: 1.5...2.5 mm², AWG 14...AWG 12 (motor/braking resistor)
            • screw terminal, clamping capacity: 1.5...4 mm², AWG 14...AWG 10 (power supply)
              • Tightening torque
              • 0.5 N.m, 4.4 lb/ft (control)
              • 0.7 N.m, 7.1 lb/ft (motor/braking resistor)
              • 0.6 N.m, 5.3 lb/ft (power supply)
                • Supply
                  internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
                  Analogue input number
                  Analogue input type
                • AI1 voltage: 0...10 V DC, impedance: 30000 Ohm, resolution 10 bits
                • AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30000 Ohm, resolution 10 bits
                • AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits
                  • Sampling duration
                  • 2 ms (AI1, AI2, AI3) - analog input(s)
                  • 2 ms (AO1) - analog input(s)
                    • Response time
                    • LI1...LI6 8 ms, tolerance +/- 0.7 ms for logic output(s)
                    • R1A, R1B, R1C 2 ms for relay output(s)
                    • R2A, R2C 2 ms for relay output(s)
                      • Accuracy
                      • +/- 0.2 % (AI1, AI2, AI3) for a temperature of -10...60 °C
                      • +/- 0.5 % (AI1, AI2, AI3) for a temperature of 25 °C
                      • +/- 1 % (AO1) for a temperature of 25 °C
                      • +/- 2 % (AO1) for a temperature of -10...60 °C
                        • Linearity error
                        • +/- 0.2...0.5 % of maximum value (AI1, AI2, AI3)
                        • +/- 0.3 % (AO1)
                          • Analogue output number
                            Analogue output type
                          • AO1 software-configurable current 0...20 mA, impedance: 800 Ohm, resolution 10 bits
                          • AO1 software-configurable voltage 0...10 V, impedance: 470 Ohm, resolution 10 bits
                            • Discrete output number
                              Discrete output type
                            • configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles
                            • configurable relay logic: (R2A, R2B) NO - 100000 cycles
                            • logic: (LO)
                              • Minimum switching current
                                5 mA at 24 V DC for configurable relay logic
                                Maximum switching current
                              • R1: 3 A at 250 V AC resistive load, cos phi = 1
                              • R1: 4 A at 30 V DC resistive load, cos phi = 1
                              • R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4
                              • R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4
                              • R2: 5 A at 250 V AC resistive load, cos phi = 1
                              • R2: 5 A at 30 V DC resistive load, cos phi = 1
                                • Discrete input number
                                  Discrete input type
                                • programmable (sink/source) (LI1...LI4)24...30 V DC, with level 1 PLC
                                • programmable as pulse input 20 kpps (LI5)24...30 V DC, with level 1 PLC
                                • switch-configurable PTC probe (LI6)24...30 V DC
                                • safe torque off (STO)24...30 V DC - 1500 Ohm
                                  • Discrete input logic
                                  • negative logic (sink) (LI1...LI6), > 19 V (state 0), < 13 V (state 1)
                                  • positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1)
                                    • Acceleration and deceleration ramps
                                    • linear
                                    • CUS
                                    • deceleration ramp adaptation
                                    • ramp switching
                                    • S
                                    • deceleration ramp automatic stop DC injection
                                    • U
                                      • Braking to standstill
                                        by DC injection
                                        Protection type
                                      • input phase breaks: drive
                                      • overcurrent between output phases and earth: drive
                                      • overheating protection: drive
                                      • short-circuit between motor phases: drive
                                      • thermal protection: drive
                                        • Communication port protocol
                                        • CANopen
                                        • Modbus
                                          • Connector type
                                            1 RJ45 (on front face) for Modbus/CANopen
                                            Physical interface
                                            2-wire RS 485 for Modbus
                                            Transmission frame
                                            RTU for Modbus
                                            Type of polarization
                                            no impedance for Modbus
                                            Number of addresses
                                          • 1-127 for CANopen
                                          • 1-247 for Modbus
                                            • Method of access
                                              slave CANopen
                                              Electromagnetic compatibility
                                            • 1.2/50 µs - 8/20 µs surge immunity test, level 3 conforming to IEC 61000-4-5
                                            • conducted radio-frequency immunity test, level 3 conforming to IEC 61000-4-6
                                            • electrical fast transient/burst immunity test, level 4 conforming to IEC 61000-4-4
                                            • electrostatic discharge immunity test, level 3 conforming to IEC 61000-4-2
                                            • radiated radio-frequency electromagnetic field immunity test, level 3 conforming to IEC 61000-4-3
                                            • voltage dips and interruptions immunity test conforming to IEC 61000-4-11
                                              • Width
                                                45 mm
                                                325 mm
                                                245 mm
                                                Net weight
                                                2.4 kg
                                                Option card
                                              • communication card for CANopen daisy chain
                                              • communication card for CANopen open style
                                              • communication card for DeviceNet
                                              • communication card for Ethernet/IP
                                              • communication card for Profibus DP V1
                                                • Standards
                                                • EN 61800-3 environments 1 category C2
                                                • EN 55011 class A group 1
                                                • EN/IEC 61800-5-1
                                                • EN/IEC 61800-3
                                                • EN 61800-3 environments 2 category C2
                                                  • Product certifications
                                                  • C-Tick
                                                  • NOM 117
                                                  • GOST
                                                  • UL
                                                  • CSA
                                                    • Marking
                                                      Pollution degree
                                                      2 conforming to EN/IEC 61800-5-1
                                                      IP degree of protection
                                                      IP20 conforming to EN/IEC 61800-5-1
                                                      Vibration resistance
                                                    • 1 gn (f = 13-200 Hz) conforming to EN/IEC 60068-2-6
                                                    • 1.5 mm peak to peak (f = 3-13 Hz) conforming to EN/IEC 60068-2-6
                                                      • Shock resistance
                                                        15 gn for 11 ms conforming to EN/IEC 60068-2-27
                                                        Relative humidity
                                                      • 5-95 % without condensation conforming to IEC 60068-2-3
                                                      • 5-95 % without dripping water conforming to IEC 60068-2-3
                                                        • Ambient air temperature for operation
                                                        • -10-50 °C without
                                                        • 50-60 °C with derating factor
                                                          • Ambient air temperature for storage
                                                            -25-70 °C
                                                            Operating altitude
                                                          • <= 1000 m without
                                                          • 1000...2000 m with current derating 1 % per 100 m
                                                            • Operating position
                                                              vertical +/- 10 degree
                                                              18 months

                                                              Documents & downloads

                                                              hide show
                                                              Filter items
                                                              • All

                                                              • CAD Files and Packs

                                                              • Movies

                                                              • Product Brochures

                                                              • Technical Data Catalogues

                                                              • Catalog Page

                                                              • Product Environmental

                                                              • Installation Instruction

                                                              • End of Life Manual

                                                              • Data Bulletin

                                                              • Handout

                                                              • Operating Manuals

                                                              • System User Guide

                                                              • Application Solutions

                                                              • Certificates (MSDS)

                                                              • eTechPub

                                                              • Declaration of Conformity

                                                              • White Paper

                                                              • EDS Files

                                                              • GSD files

                                                              • Software - Updates

                                                              • Software - Released

                                                              • DTM Files

                                                              Frequently Asked Questions

                                                              hide show

                                                              What input is designed for a bipolar -10v to +10v input on the ATV32 drives?

                                                              What input is designed for a bipolar -10v to +10v input on the ATV32 drives?

                                                              Product Line:
                                                              Altivar ATV32


                                                              AI2 is default for -10v to +10v input.

                                                              IO menu AI2 set up

                                                               Bipolar analog input 0 ± 10 V (maximum voltage ± 30 V)

                                                              The + or - polarity of the voltage on AI2 affects the direction of the set point and therefore the direction of operation.

                                                              • Impedance 30 kÙ
                                                              • Resolution: 10 bits
                                                              • Precision ±0.5% in 50/60 Hz for 25 °C, ±0.2% in 50/60 Hz for –10 to +60 °C at Äè = 60°C,
                                                              • Linearity ± 0.2% (max. ± 0.5%), of max. value
                                                              • Sampling time 2 ms