MASTER YOUR CASTLE with your new build or reno project
Enter competition
Variable speed drive with heatsink, single-phase 200,,,240 V 50/60 Hz, 2,2 kW

ATV12HU15M2

Altivar 12 Variable Speed Drive ATV12, 1.5kW, 2hp, 200..240V, 1ph

Variable speed drive with heatsink, single-phase 200,,,240 V 50/60 Hz, 2,2 kW
Colour:
Colour: Per UOM Std.
  • 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
Range of product
Altivar 12
Product or component type
variable speed drive
Product destination
asynchronous motors
Product specific application
simple machine
Assembly style
with heat sink
Component name
ATV12
Quantity per set
set of 1
EMC filter
integrated
Built-in fan
with
Network number of phases
1 phase
[Us] rated supply voltage
200...240 V - 15...10 %
Motor power kW
1.5 kW
Motor power hp
2 hp
Communication port protocol
Modbus
Line current
  • 17.8 A at 200 V
  • 14.9 A at 240 V
    • Speed range
      1-20
      Transient overtorque
      150-170 % of nominal motor torque depending on drive rating and type of motor
      Asynchronous motor control profile
    • sensorless flux vector control
    • quadratic voltage/frequency ratio
    • voltage/frequency ratio (V/f)
      • IP degree of protection
        IP20 without blanking plate on upper part
        Noise level
        45 dB
        Supply frequency
        50/60 Hz +/- 5 %
        Connector type
        1 RJ45 (on front face) for Modbus
        Physical interface
        2-wire RS 485 for Modbus
        Transmission frame
        RTU for Modbus
        Transmission rate
      • 4800 bit/s
      • 9600 bit/s
      • 19200 bit/s
      • 38400 bit/s
        • Number of addresses
          1-247 for Modbus
          Communication service
        • read holding registers (03) 29 words
        • write single register (06) 29 words
        • write multiple registers (16) 27 words
        • read/write multiple registers (23) 4/4 words
        • read device identification (43)
          • Prospective line Isc
            1 kA
            Continuous output current
            7.5 A at 4 kHz
            Maximum transient current
            11.2 A for 60 s
            Speed drive output frequency
            0.5-400 Hz
            Nominal switching frequency
            4 kHz
            Switching frequency
          • 2...16 kHz adjustable
          • 4...16 kHz with derating factor
            • Braking torque
              up to 70 % of nominal motor torque without braking resistor
              Motor slip compensation
            • adjustable
            • preset in factory
              • Output voltage
                200...240 V 3 phases
                Electrical connection
                terminal, clamping capacity: 5.5 mm², AWG 10 (L1, L2, L3, U, V, W, PA, PC)
                Tightening torque
                1.2 N.m
                Insulation
                electrical between power and control
                Supply
              • internal supply for reference potentiometer: 5 V DC (4.75-5.25 V), <10 mA, protection type: overload and short-circuit protection
              • internal supply for logic inputs: 24 V DC (20.4-28.8 V), <100 mA, protection type: overload and short-circuit protection
                • Analogue input number
                  1
                  Analogue input type
                • configurable current AI1 0...20 mA 250 Ohm
                • configurable voltage AI1 0...10 V 30 kOhm
                • configurable voltage AI1 0...5 V 30 kOhm
                  • Discrete input number
                    4
                    Discrete input type
                    programmable LI1...LI4 24 V 18...30 V
                    Discrete input logic
                  • negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm
                  • positive logic (source), 0...< 5 V (state 0), > 11 V (state 1)
                    • Sampling duration
                    • 20 ms, tolerance +/- 1 ms for logic input
                    • 10 ms for analogue input
                      • Linearity error
                        +/- 0.3 % of maximum value for analogue input
                        Analogue output number
                        1
                        Analogue output type
                      • AO1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 8 bits
                      • AO1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 8 bits
                        • Discrete output number
                          2
                          Discrete output type
                        • logic output LO+, LO-
                        • protected relay output R1A, R1B, R1C 1 C/O
                          • Minimum switching current
                            5 mA at 24 V DC for logic relay
                            Maximum switching current
                          • 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms logic relay
                          • 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms logic relay
                          • 3 A 250 V AC resistive cos phi = 1 L/R = 0 ms logic relay
                          • 4 A 30 V DC resistive cos phi = 1 L/R = 0 ms logic relay
                            • Acceleration and deceleration ramps
                            • U
                            • S
                            • linear from 0 to 999.9 s
                              • Braking to standstill
                                by DC injection, <30 s
                                Protection type
                              • line supply overvoltage
                              • line supply undervoltage
                              • overcurrent between output phases and earth
                              • overheating protection
                              • short-circuit between motor phases
                              • against input phase loss in three-phase
                              • thermal motor protection via the drive by continuous calculation of I²t
                                • Frequency resolution
                                • analog input: converter A/D, 10 bits
                                • display unit: 0.1 Hz
                                  • Time constant
                                    20 ms +/- 1 ms for reference change
                                    Marking
                                    CE
                                    Operating position
                                    vertical +/- 10 degree
                                    Height
                                    142 mm
                                    Width
                                    105 mm
                                    Depth
                                    156.2 mm
                                    Net weight
                                    1.4 kg
                                    Functionality
                                    basic
                                    Specific application
                                    commercial equipment
                                    Discrete and process manufacturing
                                    Power range
                                    1.1-2 kW at 200-240 V 1 phase
                                    Motor starter type
                                    variable speed drive
                                    Electromagnetic compatibility
                                  • electrical fast transient/burst immunity test level 4 conforming to EN/IEC 61000-4-4
                                  • electrostatic discharge immunity test level 3 conforming to EN/IEC 61000-4-2
                                  • immunity to conducted disturbances level 3 conforming to EN/IEC 61000-4-6
                                  • radiated radio-frequency electromagnetic field immunity test level 3 conforming to EN/IEC 61000-4-3
                                  • surge immunity test level 3 conforming to EN/IEC 61000-4-5
                                  • voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11
                                    • Electromagnetic emission
                                    • radiated emissions environment 1 category C2 conforming to EN/IEC 61800-3 2...16 kHz shielded motor cable
                                    • conducted emissions with integrated EMC filter environment 1 category C1 conforming to EN/IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable <5 m
                                    • conducted emissions with additional EMC filter environment 1 category C1 conforming to EN/IEC 61800-3 4...12 kHz shielded motor cable <20 m
                                    • conducted emissions with additional EMC filter environment 1 category C2 conforming to EN/IEC 61800-3 4...12 kHz shielded motor cable <50 m
                                    • conducted emissions with additional EMC filter environment 2 category C3 conforming to EN/IEC 61800-3 4...12 kHz shielded motor cable <50 m
                                    • conducted emissions with integrated EMC filter environment 1 category C2 conforming to EN/IEC 61800-3 4...16 kHz shielded motor cable <5 m
                                    • conducted emissions with integrated EMC filter environment 1 category C2 conforming to EN/IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable <10 m
                                      • Product certifications
                                      • CSA
                                      • GOST
                                      • UL
                                      • NOM
                                      • C-Tick
                                        • Vibration resistance
                                        • 1 gn (f = 13-200 Hz) conforming to EN/IEC 60068-2-6
                                        • 1.5 mm peak to peak (f = 3-13 Hz) - drive unmounted on symmetrical DIN rail - conforming to EN/IEC 60068-2-6
                                          • Shock resistance
                                            N/A
                                            Relative humidity
                                          • 5-95 % without condensation conforming to IEC 60068-2-3
                                          • 5-95 % without dripping water conforming to IEC 60068-2-3
                                            • Ambient air temperature for storage
                                              -25-70 °C
                                              Ambient air temperature for operation
                                            • -10-50 °C protective cover from the top of the drive removed
                                            • 50-60 °C with current derating 2.2 % per °C
                                              • Operating altitude
                                              • > 1000...2000 m with current derating 1 % per 100 m
                                              • <= 1000 m without
                                                • Sustainable offer status
                                                  Green Premium product
                                                  REACh Regulation
                                                  Free of Substances of Very High Concern above the threshold
                                                  REACh free of SVHC
                                                  Yes
                                                  EU RoHS Directive
                                                  Pro-active compliance (Product out of EU RoHS legal scope)
                                                  Mercury free
                                                  Yes
                                                  RoHS exemption information
                                                  Yes
                                                  China RoHS Regulation
                                                  X
                                                  Environmental Disclosure
                                                  ENVPEP090202EN
                                                  Circularity Profile
                                                  ENVEOLI100205EN
                                                  WEEE
                                                  The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
                                                  Warranty
                                                  18 months

                                                  Documents & downloads

                                                  hide show
                                                  Filter items
                                                  • All

                                                  • Product Brochures

                                                  • CAD Files and Packs

                                                  • Technical Data Catalogues

                                                  • Technical Leaflet

                                                  • Installation Instruction

                                                  • End of Life Manual

                                                  • Handout

                                                  • Data Bulletin

                                                  • Product Environmental

                                                  • Operating Manuals

                                                  • System User Guide

                                                  • Specifications

                                                  • Specification for Tender

                                                  • Application Solutions

                                                  • Certificates (MSDS)

                                                  • eTechPub

                                                  • White Paper

                                                  • DTM Files

                                                  • Software - Updates

                                                  • Software - Released

                                                  • Training Material

                                                  Frequently Asked Questions

                                                  hide show

                                                  What is a good source of information for the ATV12?

                                                  Issue:
                                                  What is a good source of information for the ATV12?

                                                  Product Line:
                                                  Altivar 12

                                                  Environment:
                                                  All models and serial numbers

                                                  Cause:
                                                  Information is needed for installation and programming.

                                                  Resolution:
                                                  User manual is document number BBV28581.  This manual includes instructions for installing the drive, connecting the control wiring, programming and troubleshooting.
                                                  https://www.schneider-electric.us/en/download/document/BBV28581/