MASTER YOUR CASTLE with your new build or reno project

Enter competition
DETAILS PRIZES T&CS

Building or Renovating?

Master your castle with the ultimate electrical and smart home package, valued at $20,000, for your new build or reno project.

Click on the link below to enter your details for your chance to WIN!

Complete your details

Your Details

Enter the prize draw

Thanks for entering

The lucky winner will be notified by phone and email on 27th November 2019.

Why not spread the word and increase your chances of winning? Each social media share will earn you an extra entry into the draw and bring Clipsal by Schneider Electric another step closer to empowering a community in need.

The competition has now closed.

The winning entry will be drawn Tuesday 27 November 2019 at 2.00pm (AEST).
The winner’s name will be published in The Australian newspaper on Saturday 1st December 2019, but will also be contacted via email and phone on the day of the draw.

We've got the winner!

 

What do you need to 'Master Your Castle'?

Clipsal's Master Your Castle promotion gives you the chance to go into the running to win an ultimate home electrical and smart home package. Whether you are building your dream home or renovating your much loved house, winning this house lot of Clipsal products will help you master your castle.

Default
house lot of clipsal products

Receive a Clipspec consultation to design the ultimate customised electrical package, tailor-made for your home.

Walk through your house plans with an expert and select $15,000 worth of Clipsal electrical products. Choose from: LED downlights, exterior wall lights, floodlights, switches, dimmers, power points, bluetooth speakers, motion sensors, smoke alarms, ceiling fans, smart home solutions, or anything else Clipsal has to offer. Then receive $5,000 towards the installation of your selected products.

TERMS AND CONDITIONS

  1. Information on how to enter and the prizes forms part of these Terms and Conditions.
  2. Participation in this promotion is deemed acceptance of these Terms and Conditions.
  3. The Promotional Period commences on Friday 29 March 2019 10.00am (AEST) and closes on Wednesday 20 November 2019 at 9.00pm (AEST).
  4. Entry is open to Australian residents over the age of 18 only.
  5. There is a limit of one entry per person, unless the promoter offers additional entries via a social media promotion, in which case, additional entries will be automatically added on the participants behalf by the promoter.
  6. Employees (and their immediate families) of the Promoter(s) and associated agencies are ineligible to enter. Immediate family means any of the following: spouse, ex-spouse, defacto spouse, child or step-child (whether natural or by adoption), parent, step-parent, grandparent, step-grandparent, uncle, aunt, niece, nephew, brother, sister, step-brother, step-sister or first cousin.
  7. To enter, individuals must, during the Promotional Period:
    1. Visit the ‘Clipsal at Home’ web page, or any of its linked pages and fill in all required fields of the competition form that will appear as a pop up option.
    2. Or sign up at the Clipsal stand at the Sydney HIA Home Show 5-7 th April: ICC Sydney, Darling Harbour.
    3. Or sign up via ROKT lead generation promotion.
    4. Or opt in using the Clipsal Smart Home Selector tool.
  8. There is one major prize to be won, consisting of the winners choice of Clipsal home electrical and smart home products. The major prize has a total value of approximately $20,000, including approx. $15,000 worth of Clipsal home electrical or smart home products and $5,000 towards the cost of installing the products. The $15,000 worth of Clipsal products is chosen by the winner. The winner will be contacted by a Clipsal Consumer Support Agent within two weeks of the prize being drawn to arrange a compulsory consultation with a Clipspec Consultant, at which time a customised prize package (up to the value of $15,000) will be created. The $5,000 towards the cost of installing the products will be awarded to the winner in the form of prepaid VISA gift cards, with the intention that it will be used to pay the electrical contractor conducting the install at the appropriate time.
  9. The winner will be selected via registered electronic draw Approval No: 1224 at Schneider Electric Adelaide Office: 33 – 37 Port Wakefield Road Gepps Cross on Wednesday 27 November 2019 at 2.00pm (AEST).
  10. The winners will be notified by telephone and in writing by a Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  11. The winners name will be published in The Australian newspaper on Saturday 30th November 2019.
  12. By entering the competition and agreeing to these terms and conditions, the winner automatically consents to approval of a case study showcasing the Clipsal solutions selected for installation. This will involve an interview with a Clipsal representative (either in person or via phone) and photographs/videos being taken of their home (at no cost to them). The results of this will be presented in the form of a written story with video imagery to accompany which can be used in any form of media or promotional purposes for an unlimited amount of time (see clause 21).
  13. The Promoter reserves the right, at any time, to verify the validity of entries, registrations and entrants (including an entrant’s identity, age and place of residence) and to disqualify any entrant who submits an entry or registration that is not in accordance with these Terms and Conditions or who tampers with the entry/registration process. Errors and omissions may be accepted at the Promoter's discretion. Failure by the Promoter to enforce any of its rights at any stage does not constitute a waiver of those rights.
  14. Subject to the unclaimed prize draw clause, if for any reason a winner does not take a prize by the time stipulated by the Promoter, then the prize will be forfeited.
  15. If any prize is unavailable, the Promoter, in its discretion, reserves the right to substitute the prize with a prize to the equal value and/or specification, subject to the relevant authorities.
  16. Unclaimed Prize Draw: The winners are given 3 months to claim their prize. Should it necessary a redraw will take place for all unclaimed prizes on Friday 28th February 2020 at Clipsal by Schneider Electric Adelaide Office (33-37 Port Wakefield Road, Gepps Cross, SA 5094) at 2.00pm (AEST). The winner will be notified by telephone and in writing by a Schneider Electric or Clipsal by Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  17. The redrawn winners name will be published in The Australian newspaper on Friday 6th March 2020.
  18. The Prize is not transferable or exchangeable and cannot be taken as cash.
  19. If a Prize is not available for any reason, the Promoter may substitute an alternative prize to at least the value and of a similar standard as the Prize that is not available.
  20. The promoter makes no representation or warranty about the fitness for purpose or merchantable quality of the Prize.
  21. Entrants consent to the Promoter using their name and/or image in the event they are a winner in any media for an unlimited period without remuneration for its promotional and publicity purposes.
  22. The Promoter may, subject to any written directions from a regulatory authority, modify, suspend, terminate or cancel the promotion, as appropriate.
  23. The Promoter collects personal information in order to conduct the promotion and may, for this purpose, disclose such information to third parties, including but not limited to agents, contractors, service providers, prize suppliers and, as required, to Australian regulatory authorities. Entry is conditional on providing this information. The Promoter may, for an indefinite period, unless otherwise advised, use the information for promotional, marketing, publicity, research and profiling purposes, including sending electronic messages or telephoning the Eligible Entrant. Eligible Entrants should direct any request to opt out, access, update or correct information to the Promoter. All entries become the property of the Promoter.
  24. The Promoter’s and judges’ decision is final and no correspondence will be entered into.
  25. If this promotion is interfered with in any way or is not capable of being conducted as reasonably anticipated due to any reason beyond the reasonable control of the Promoter, including but not limited to technical difficulties, unauthorised intervention or fraud, the Promoter reserves the right, in its sole discretion, to the fullest extent permitted by law (a) to disqualify any entrant; or (b) subject to any written directions from a regulatory authority, to modify, suspend, terminate or cancel the promotion, as appropriate.
  26. Nothing in these Terms and Conditions limits, excludes or modifies or purports to limit, exclude or modify the statutory consumer guarantees as provided under the Competition and Consumer Act, as well as any other implied warranties under similar consumer protection laws in the State and Territories of Australia (Non-Excludable Guarantees). Except for any liability that cannot by law be excluded, including the Non-Excludable Guarantees, the Promoter (including its respective officers, employees and agents) is not responsible for and excludes all liability for any personal injury or any loss or damage whether direct, indirect, special or consequential arising in any way out of the promotion or use of a Prize.
  27. The Promoter is Schneider Electric (Australia) Pty Ltd (ABN 42 004 969 304) of 78 Waterloo Rd, Macquarie Park, NSW 2113.
Variable speed drive with heatsink, single-phase 200,,,240 V 50/60 Hz, 0,75 kW

ATV12H055M2

Altivar 12 Variable Speed Drive ATV12, 0.55kW, 0.75hp, 200..240V, 1ph

Variable speed drive with heatsink, single-phase 200,,,240 V 50/60 Hz, 0,75 kW
Colour:
Colour: Per UOM Std.
  • 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
Range of product
Altivar 12
Product or component type
variable speed drive
Product destination
asynchronous motors
Product specific application
simple machine
Assembly style
with heat sink
Component name
ATV12
Quantity per set
set of 1
EMC filter
integrated
Built-in fan
without
Network number of phases
1 phase
[Us] rated supply voltage
200...240 V - 15...10 %
Motor power kW
0.55 kW
Motor power hp
0.75 hp
Communication port protocol
Modbus
Line current
  • 8 A at 200 V
  • 6.7 A at 240 V
    • Speed range
      1-20
      Transient overtorque
      150-170 % of nominal motor torque depending on drive rating and type of motor
      Asynchronous motor control profile
    • voltage/frequency ratio (V/f)
    • quadratic voltage/frequency ratio
    • sensorless flux vector control
      • IP degree of protection
        IP20 without blanking plate on upper part
        Noise level
        0 dB
        Supply frequency
        50/60 Hz +/- 5 %
        Connector type
        1 RJ45 (on front face) for Modbus
        Physical interface
        2-wire RS 485 for Modbus
        Transmission frame
        RTU for Modbus
        Transmission rate
      • 4800 bit/s
      • 9600 bit/s
      • 19200 bit/s
      • 38400 bit/s
        • Number of addresses
          1-247 for Modbus
          Communication service
        • read holding registers (03) 29 words
        • write single register (06) 29 words
        • write multiple registers (16) 27 words
        • read/write multiple registers (23) 4/4 words
        • read device identification (43)
          • Prospective line Isc
            1 kA
            Continuous output current
            3.5 A at 4 kHz
            Maximum transient current
            5.3 A for 60 s
            Speed drive output frequency
            0.5-400 Hz
            Nominal switching frequency
            4 kHz
            Switching frequency
          • 2...16 kHz adjustable
          • 4...16 kHz with derating factor
            • Braking torque
              up to 70 % of nominal motor torque without braking resistor
              Motor slip compensation
            • preset in factory
            • adjustable
              • Output voltage
                200...240 V 3 phases
                Electrical connection
                terminal, clamping capacity: 3.5 mm², AWG 12 (L1, L2, L3, U, V, W, PA, PC)
                Tightening torque
                0.8 N.m
                Insulation
                electrical between power and control
                Supply
              • internal supply for reference potentiometer: 5 V DC (4.75-5.25 V), <10 mA, protection type: overload and short-circuit protection
              • internal supply for logic inputs: 24 V DC (20.4-28.8 V), <100 mA, protection type: overload and short-circuit protection
                • Analogue input number
                  1
                  Analogue input type
                • configurable current AI1 0...20 mA 250 Ohm
                • configurable voltage AI1 0...10 V 30 kOhm
                • configurable voltage AI1 0...5 V 30 kOhm
                  • Discrete input number
                    4
                    Discrete input type
                    programmable LI1...LI4 24 V 18...30 V
                    Discrete input logic
                  • negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm
                  • positive logic (source), 0...< 5 V (state 0), > 11 V (state 1)
                    • Sampling duration
                    • 20 ms, tolerance +/- 1 ms for logic input
                    • 10 ms for analogue input
                      • Linearity error
                        +/- 0.3 % of maximum value for analogue input
                        Analogue output number
                        1
                        Analogue output type
                      • AO1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 8 bits
                      • AO1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 8 bits
                        • Discrete output number
                          2
                          Discrete output type
                        • logic output LO+, LO-
                        • protected relay output R1A, R1B, R1C 1 C/O
                          • Minimum switching current
                            5 mA at 24 V DC for logic relay
                            Maximum switching current
                          • 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms logic relay
                          • 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms logic relay
                          • 3 A 250 V AC resistive cos phi = 1 L/R = 0 ms logic relay
                          • 4 A 30 V DC resistive cos phi = 1 L/R = 0 ms logic relay
                            • Acceleration and deceleration ramps
                            • linear from 0 to 999.9 s
                            • S
                            • U
                              • Braking to standstill
                                by DC injection, <30 s
                                Protection type
                              • line supply overvoltage
                              • line supply undervoltage
                              • overcurrent between output phases and earth
                              • overheating protection
                              • short-circuit between motor phases
                              • against input phase loss in three-phase
                              • thermal motor protection via the drive by continuous calculation of I²t
                                • Frequency resolution
                                • analog input: converter A/D, 10 bits
                                • display unit: 0.1 Hz
                                  • Time constant
                                    20 ms +/- 1 ms for reference change
                                    Marking
                                    CE
                                    Operating position
                                    vertical +/- 10 degree
                                    Height
                                    143 mm
                                    Width
                                    72 mm
                                    Depth
                                    131.2 mm
                                    Net weight
                                    0.8 kg
                                    Functionality
                                    basic
                                    Specific application
                                    commercial equipment
                                    Power range
                                    0.55-1 kW at 200-240 V 1 phase
                                    Motor starter type
                                    variable speed drive
                                    Electromagnetic compatibility
                                  • electrical fast transient/burst immunity test level 4 conforming to EN/IEC 61000-4-4
                                  • electrostatic discharge immunity test level 3 conforming to EN/IEC 61000-4-2
                                  • immunity to conducted disturbances level 3 conforming to EN/IEC 61000-4-6
                                  • radiated radio-frequency electromagnetic field immunity test level 3 conforming to EN/IEC 61000-4-3
                                  • surge immunity test level 3 conforming to EN/IEC 61000-4-5
                                  • voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11
                                    • Electromagnetic emission
                                    • radiated emissions environment 1 category C2 conforming to EN/IEC 61800-3 2...16 kHz shielded motor cable
                                    • conducted emissions with integrated EMC filter environment 1 category C1 conforming to EN/IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable <5 m
                                    • conducted emissions with integrated EMC filter environment 1 category C2 conforming to EN/IEC 61800-3 2...12 kHz shielded motor cable <5 m
                                    • conducted emissions with integrated EMC filter environment 1 category C2 conforming to EN/IEC 61800-3 2, 4 and 16 kHz shielded motor cable <10 m
                                    • conducted emissions with additional EMC filter environment 1 category C1 conforming to EN/IEC 61800-3 4...12 kHz shielded motor cable <20 m
                                    • conducted emissions with additional EMC filter environment 1 category C2 conforming to EN/IEC 61800-3 4...12 kHz shielded motor cable <50 m
                                    • conducted emissions with additional EMC filter environment 2 category C3 conforming to EN/IEC 61800-3 4...12 kHz shielded motor cable <50 m
                                      • Product certifications
                                      • C-Tick
                                      • NOM
                                      • GOST
                                      • CSA
                                      • UL
                                        • Vibration resistance
                                        • 1 gn (f = 13-200 Hz) conforming to EN/IEC 60068-2-6
                                        • 1.5 mm peak to peak (f = 3-13 Hz) - drive unmounted on symmetrical DIN rail - conforming to EN/IEC 60068-2-6
                                          • Shock resistance
                                            15 gn for 11 ms conforming to EN/IEC 60068-2-27
                                            Relative humidity
                                          • 5-95 % without condensation conforming to IEC 60068-2-3
                                          • 5-95 % without dripping water conforming to IEC 60068-2-3
                                            • Ambient air temperature for storage
                                              -25-70 °C
                                              Ambient air temperature for operation
                                            • -10-40 °C protective cover from the top of the drive removed
                                            • 40-60 °C with current derating 2.2 % per °C
                                              • Operating altitude
                                              • > 1000...2000 m with current derating 1 % per 100 m
                                              • <= 1000 m without
                                                • Sustainable offer status
                                                  Green Premium product
                                                  REACh Regulation
                                                  Reference contains Substances of Very High Concern above the threshold
                                                  EU RoHS Directive
                                                  Pro-active compliance (Product out of EU RoHS legal scope)
                                                  Mercury free
                                                  Yes
                                                  RoHS exemption information
                                                  Yes
                                                  China RoHS Regulation
                                                  X
                                                  Environmental Disclosure
                                                  ENVPEP090201EN
                                                  Circularity Profile
                                                  ENVEOLI100204EN
                                                  WEEE
                                                  The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
                                                  CALIFORNIA PROPOSITION 65
                                                  WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
                                                  Warranty
                                                  18 months

                                                  Documents & downloads

                                                  hide show
                                                  Filter items
                                                  • All

                                                  • Product Brochures

                                                  • CAD Files and Packs

                                                  • Technical Data Catalogues

                                                  • Catalog Page

                                                  • Technical Leaflet

                                                  • Installation Instruction

                                                  • Product Environmental

                                                  • End of Life Manual

                                                  • Handout

                                                  • Data Bulletin

                                                  • Operating Manuals

                                                  • System User Guide

                                                  • Specifications

                                                  • Specification for Tender

                                                  • Application Solutions

                                                  • Certificates (MSDS)

                                                  • eTechPub

                                                  • White Paper

                                                  • DTM Files

                                                  • Software - Updates

                                                  • Software - Released

                                                  • Training Material