MASTER YOUR CASTLE with your new build or reno project
Enter competition
DETAILS PRIZES T&CS

Building or Renovating?

Master your castle with the ultimate electrical and smart home package, valued at $20,000, for your new build or reno project.

Click on the link below to enter your details for your chance to WIN!

Complete your details

Your Details

Enter the prize draw

Thanks for entering

The lucky winner will be notified by phone and email on 27th November 2019.

Why not spread the word and increase your chances of winning? Each social media share will earn you an extra entry into the draw and bring Clipsal by Schneider Electric another step closer to empowering a community in need.

The competition has now closed.

The winning entry will be drawn Tuesday 27 November 2019 at 2.00pm (AEST).
The winner’s name will be published in The Australian newspaper on Saturday 1st December 2019, but will also be contacted via email and phone on the day of the draw.

We've got the winner!

 

What do you need to 'Master Your Castle'?

Clipsal's Master Your Castle promotion gives you the chance to go into the running to win an ultimate home electrical and smart home package. Whether you are building your dream home or renovating your much loved house, winning this house lot of Clipsal products will help you master your castle.

Default
Receive a Clipspec consultation to design the ultimate customised electrical package, tailor-made for your home.

Walk through your house plans with an expert and select $15,000 worth of Clipsal electrical products. Choose from: LED downlights, exterior wall lights, floodlights, switches, dimmers, power points, bluetooth speakers, motion sensors, smoke alarms, ceiling fans, smart home solutions, or anything else Clipsal has to offer. Then receive $5,000 towards the installation of your selected products.

TERMS AND CONDITIONS

  1. Information on how to enter and the prizes forms part of these Terms and Conditions.

  2. Participation in this promotion is deemed acceptance of these Terms and Conditions.

  3. The Promotional Period commences on Friday 29 March 2019 10.00am (AEST) and closes on Wednesday 20 November 2019 at 9.00pm (AEST).
  4. Entry is open to Australian residents over the age of 18 only.
  5. There is a limit of one entry per person, unless the promoter offers additional entries via a social media promotion, in which case, additional entries will be automatically added on the participants behalf by the promoter.
  6. Employees (and their immediate families) of the Promoter(s) and associated agencies are ineligible to enter. Immediate family means any of the following: spouse, ex-spouse, defacto spouse, child or step-child (whether natural or by adoption), parent, step-parent, grandparent, step-grandparent, uncle, aunt, niece, nephew, brother, sister, step-brother, step-sister or first cousin.
  7. To enter, individuals must, during the Promotional Period:
    1. Visit the ‘Clipsal at Home’ web page, or any of its linked pages and fill in all required fields of the competition form that will appear as a pop up option.
    2. Or sign up at the Clipsal stand at the Sydney HIA Home Show 5-7 th April: ICC Sydney, Darling Harbour.
    3. Or sign up via ROKT lead generation promotion.
    4. Or opt in using the Clipsal Smart Home Selector tool.
  8. There is one major prize to be won, consisting of the winners choice of Clipsal home electrical and smart home products. The major prize has a total value of approximately $20,000, including approx. $15,000 worth of Clipsal home electrical or smart home products and $5,000 towards the cost of installing the products. The $15,000 worth of Clipsal products is chosen by the winner. The winner will be contacted by a Clipsal Consumer Support Agent within two weeks of the prize being drawn to arrange a compulsory consultation with a Clipspec Consultant, at which time a customised prize package (up to the value of $15,000) will be created. The $5,000 towards the cost of installing the products will be awarded to the winner in the form of prepaid VISA gift cards, with the intention that it will be used to pay the electrical contractor conducting the install at the appropriate time.
  9. The winner will be selected via registered electronic draw Approval No: 1224 at Schneider Electric Adelaide Office: 33 – 37 Port Wakefield Road Gepps Cross on Wednesday 27 November 2019 at 2.00pm (AEST).
  10. The winners will be notified by telephone and in writing by a Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  11. The winners name will be published in The Australian newspaper on Saturday 30th November 2019.
  12. By entering the competition and agreeing to these terms and conditions, the winner automatically consents to approval of a case study showcasing the Clipsal solutions selected for installation. This will involve an interview with a Clipsal representative (either in person or via phone) and photographs/videos being taken of their home (at no cost to them). The results of this will be presented in the form of a written story with video imagery to accompany which can be used in any form of media or promotional purposes for an unlimited amount of time (see clause 21).
  13. The Promoter reserves the right, at any time, to verify the validity of entries, registrations and entrants (including an entrant’s identity, age and place of residence) and to disqualify any entrant who submits an entry or registration that is not in accordance with these Terms and Conditions or who tampers with the entry/registration process. Errors and omissions may be accepted at the Promoter's discretion. Failure by the Promoter to enforce any of its rights at any stage does not constitute a waiver of those rights.
  14. Subject to the unclaimed prize draw clause, if for any reason a winner does not take a prize by the time stipulated by the Promoter, then the prize will be forfeited.
  15. If any prize is unavailable, the Promoter, in its discretion, reserves the right to substitute the prize with a prize to the equal value and/or specification, subject to the relevant authorities.
  16. Unclaimed Prize Draw: The winners are given 3 months to claim their prize. Should it necessary a redraw will take place for all unclaimed prizes on Friday 28th February 2020 at Clipsal by Schneider Electric Adelaide Office (33-37 Port Wakefield Road, Gepps Cross, SA 5094) at 2.00pm (AEST). The winner will be notified by telephone and in writing by a Schneider Electric or Clipsal by Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  17. The redrawn winners name will be published in The Australian newspaper on Friday 6th March 2020.
  18. The Prize is not transferable or exchangeable and cannot be taken as cash.
  19. If a Prize is not available for any reason, the Promoter may substitute an alternative prize to at least the value and of a similar standard as the Prize that is not available.
  20. The promoter makes no representation or warranty about the fitness for purpose or merchantable quality of the Prize.
  21. Entrants consent to the Promoter using their name and/or image in the event they are a winner in any media for an unlimited period without remuneration for its promotional and publicity purposes.
  22. The Promoter may, subject to any written directions from a regulatory authority, modify, suspend, terminate or cancel the promotion, as appropriate.
  23. The Promoter collects personal information in order to conduct the promotion and may, for this purpose, disclose such information to third parties, including but not limited to agents, contractors, service providers, prize suppliers and, as required, to Australian regulatory authorities. Entry is conditional on providing this information. The Promoter may, for an indefinite period, unless otherwise advised, use the information for promotional, marketing, publicity, research and profiling purposes, including sending electronic messages or telephoning the Eligible Entrant. Eligible Entrants should direct any request to opt out, access, update or correct information to the Promoter. All entries become the property of the Promoter.
  24. The Promoter’s and judges’ decision is final and no correspondence will be entered into.
  25. If this promotion is interfered with in any way or is not capable of being conducted as reasonably anticipated due to any reason beyond the reasonable control of the Promoter, including but not limited to technical difficulties, unauthorised intervention or fraud, the Promoter reserves the right, in its sole discretion, to the fullest extent permitted by law (a) to disqualify any entrant; or (b) subject to any written directions from a regulatory authority, to modify, suspend, terminate or cancel the promotion, as appropriate.
  26. Nothing in these Terms and Conditions limits, excludes or modifies or purports to limit, exclude or modify the statutory consumer guarantees as provided under the Competition and Consumer Act, as well as any other implied warranties under similar consumer protection laws in the State and Territories of Australia (Non-Excludable Guarantees). Except for any liability that cannot by law be excluded, including the Non-Excludable Guarantees, the Promoter (including its respective officers, employees and agents) is not responsible for and excludes all liability for any personal injury or any loss or damage whether direct, indirect, special or consequential arising in any way out of the promotion or use of a Prize.
  27. The Promoter is Schneider Electric (Australia) Pty Ltd (ABN 42 004 969 304) of 78 Waterloo Rd, Macquarie Park, NSW 2113.
Soft start-soft stoft unit ATS U01N2
Soft start-soft stoft unit ATS U01N2
Soft start-soft stoft unit ATS U01N2
Soft start-soft stoft unit ATS U01N2

ATSU01N232LT

Soft-Start Stop 32A 200 480V

Soft start-soft stoft unit ATS U01N2
Soft start-soft stoft unit ATS U01N2
Soft start-soft stoft unit ATS U01N2
Soft start-soft stoft unit ATS U01N2
Colour:
Colour: Per UOM Std.
  • 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
Range of product
Altistart U01 and TeSys U
Product or component type
soft starter
Product destination
asynchronous motors
Product specific application
simple machine
Device short name
ATSU01
Network number of phases
3 phases
[Us] rated supply voltage
200...480 V - 10...10 %
Motor power kW
  • 15 kW, 3 phases at 400 V
  • 7.5 kW, 3 phases at 230 V
    • Motor power hp
    • 10 hp, 3 phases at 230 V
    • 20 hp, 3 phases at 460 V
      • IcL starter rating
        32 A
        Utilisation category
        AC-53B conforming to EN/IEC 60947-4-2
        Current consumption
        100 mA
        Type of start
        start with voltage ramp
        Power dissipation in W
      • 2.5 W at full load and at end of starting
      • 322.5 W in transient state
        • Assembly style
          with heat sink
          Function available
          integrated bypass
          Supply voltage limits
          180-528 V
          Supply frequency
          50...60 Hz - 5...5 %
          Network frequency
          47.5...63 Hz
          Output voltage
          <= power supply voltage
          [Uc] control circuit voltage
          24 V DC +/- 10 %
          Starting time
        • adjustable from 1 to 10 s
        • 1 s / 50
        • 10 s / 5
        • 5 s / 10
          • Deceleration time symb
            adjustable from 1 to 10 s
            Starting torque
            30...80 % of starting torque of motor connected directly on the line supply
            Discrete input type
            logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
            Discrete input voltage
            24...40 V
            Input output isolation
            galvanic between power and control
            Discrete input logic
            positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
            Discrete output current
          • 2 A DC-13
          • 3 A AC-15
            • Discrete output type
            • open collector logic LO1 end of starting signal
            • relay outputs R1A, R1C NO
              • Discrete output voltage
                24 V (voltage limits: 6...30 V) open collector logic
                Minimum switching current
                10 mA at 6 V DC for relay outputs
                Maximum switching current
              • relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
              • relay outputs: 2 A at 250 V AC AC-15 cos phi = 0.5 and L/R = 20 ms inductive load
                • Maximum switching voltage
                  440 V relay outputs
                  Display type
                • 1 LED (green) for starter powered up
                • 1 LED (yellow) for nominal voltage reached
                  • Tightening torque
                  • 1.9-2.5 N.m
                  • 0.5-0.5 N.m
                    • Electrical connection
                    • 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
                    • screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
                    • screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit
                    • 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit
                    • screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit
                    • screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
                    • 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
                    • screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
                    • 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit
                    • 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
                      • Marking
                        CE
                        Operating position
                        vertical +/- 10 degree
                        Height
                        314 mm
                        Width
                        45 mm
                        Depth
                        170 mm
                        Net weight
                        0.49 kg
                        Power range
                      • 7-11 kW at 200-240 V 3 phases
                      • 15-25 kW at 380-440 V 3 phases
                        • Motor starter type
                          soft starter
                          Electromagnetic compatibility
                        • conducted and radiated emissions level B conforming to CISPR 11
                        • immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
                        • voltage/current impulse level 3 conforming to IEC 61000-4-5
                        • conducted and radiated emissions level 3 conforming to IEC 61000-4-6
                        • immunity to conducted interference caused by radio-electrical fields conforming to IEC 61000-4-11
                        • conducted and radiated emissions level B conforming to IEC 60947-4-2
                        • damped oscillating waves level 3 conforming to IEC 61000-4-12
                        • electrostatic discharge level 3 conforming to IEC 61000-4-2
                        • EMC immunity conforming to EN 50082-1
                        • EMC immunity conforming to EN 50082-2
                        • harmonics conforming to IEC 1000-3-2
                        • harmonics conforming to IEC 1000-3-4
                        • immunity to electrical transients level 4 conforming to IEC 61000-4-4
                          • Standards
                            EN/IEC 60947-4-2
                            Product certifications
                          • UL
                          • CCC
                          • CSA
                          • C-Tick
                            • IP degree of protection
                              IP20
                              Pollution degree
                              2 conforming to EN/IEC 60947-4-2
                              Vibration resistance
                            • 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6
                            • 1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6
                              • Shock resistance
                                15 gn for 11 ms conforming to EN/IEC 60068-2-27
                                Relative humidity
                                5-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
                                Ambient air temperature for operation
                              • -10-40 °C (without)
                              • 40-50 °C (with current derating of 2 % per °C)
                                • Ambient air temperature for storage
                                  -25-70 °C conforming to EN/IEC 60947-4-2
                                  Operating altitude
                                • <= 1000 m without
                                • > 1000 m with current derating of 2.2 % per additional 100 m
                                  • REACh Regulation
                                    Reference contains Substances of Very High Concern above the threshold
                                    REACh free of SVHC
                                    Yes
                                    EU RoHS Directive
                                    Pro-active compliance (Product out of EU RoHS legal scope)
                                    Toxic heavy metal free
                                    Yes
                                    Mercury free
                                    Yes
                                    RoHS exemption information
                                    Yes
                                    China RoHS Regulation
                                    X
                                    Circularity Profile
                                    ENVEOLI100217EN
                                    WEEE
                                    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
                                    CALIFORNIA PROPOSITION 65
                                    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
                                    Warranty
                                    18 months

                                    Documents & downloads

                                    hide show
                                    Filter items
                                    • All

                                    • CAD Files and Packs

                                    • Product Brochures

                                    • Technical Data Catalogues

                                    • End of Life Manual

                                    • Installation Instruction

                                    • Handout

                                    • Product Environmental

                                    • Data Bulletin

                                    • Certificates (MSDS)

                                    • eTechPub

                                    Frequently Asked Questions

                                    hide show

                                    What are the adjustment ranges for the dials on an ATSU01N2..LT?

                                    For both the START TIME and STOP TIME dials, setpoint A is 1second and setpoint E is 10seconds.  There is a linear relationship from A to E setpoints.
                                    For the INITIAL VOLTAGE dial, setpoint A is 30% and setpoint E is 80% of full voltage.  There is a linear relationship from A to E setpoints.



                                    CTA-ID : 2061385

                                    Does the ATS01 come with a shorting contactor?

                                    Issue:
                                    Does the ATS01 come with a shorting contactor?

                                    Product Line:
                                    Altistat 01

                                    Environment:
                                    All

                                    Cause:
                                    N/A

                                    Resolution:
                                    All of the ALTISTART 01 models, except the ATS01N103FT and ATS01N106FT, have an internal shorting contactor as standard.

                                    Is the LH4N still available?

                                    Issue:
                                    Is the LH4N still available?

                                    Product Line:
                                    LH4N

                                    Environment:
                                    All models and all serial numbers

                                    Cause:
                                    Customer was looking for purchasing the LH4N112RT7.

                                    Resolution:
                                    No, the LH4N soft starter is obsolete. Please replace with the appropriate ATS01 or ATS22 soft starter. Consider application needs and features of currently-offered products.


                                     

                                    Are Softstarters acceptable for use in a Fire Pump applications?

                                    Issue:
                                    Are Softstarters acceptable for use in a Fire Pump applications?

                                    Product line:
                                    Altistart 22 48 ATS22 ATS48

                                    Environment:
                                    all

                                    Cause:
                                    Fire pump systems typically require the motors to run until they fail, without faulting the controller

                                    Resolution:
                                    No. The softstarters are not rated for Fire pump requirements and does not meet the requirements.