MASTER YOUR CASTLE with your new build or reno project

Enter competition
DETAILS PRIZES T&CS

Building or Renovating?

Master your castle with the ultimate electrical and smart home package, valued at $20,000, for your new build or reno project.

Click on the link below to enter your details for your chance to WIN!

Complete your details

Your Details

Enter the prize draw

Thanks for entering

The lucky winner will be notified by phone and email on 27th November 2019.

Why not spread the word and increase your chances of winning? Each social media share will earn you an extra entry into the draw and bring Clipsal by Schneider Electric another step closer to empowering a community in need.

The competition has now closed.

The winning entry will be drawn Tuesday 27 November 2019 at 2.00pm (AEST).
The winner’s name will be published in The Australian newspaper on Saturday 1st December 2019, but will also be contacted via email and phone on the day of the draw.

We've got the winner!

 

What do you need to 'Master Your Castle'?

Clipsal's Master Your Castle promotion gives you the chance to go into the running to win an ultimate home electrical and smart home package. Whether you are building your dream home or renovating your much loved house, winning this house lot of Clipsal products will help you master your castle.

Default
house lot of clipsal products

Receive a Clipspec consultation to design the ultimate customised electrical package, tailor-made for your home.

Walk through your house plans with an expert and select $15,000 worth of Clipsal electrical products. Choose from: LED downlights, exterior wall lights, floodlights, switches, dimmers, power points, bluetooth speakers, motion sensors, smoke alarms, ceiling fans, smart home solutions, or anything else Clipsal has to offer. Then receive $5,000 towards the installation of your selected products.

TERMS AND CONDITIONS

  1. Information on how to enter and the prizes forms part of these Terms and Conditions.
  2. Participation in this promotion is deemed acceptance of these Terms and Conditions.
  3. The Promotional Period commences on Friday 29 March 2019 10.00am (AEST) and closes on Wednesday 20 November 2019 at 9.00pm (AEST).
  4. Entry is open to Australian residents over the age of 18 only.
  5. There is a limit of one entry per person, unless the promoter offers additional entries via a social media promotion, in which case, additional entries will be automatically added on the participants behalf by the promoter.
  6. Employees (and their immediate families) of the Promoter(s) and associated agencies are ineligible to enter. Immediate family means any of the following: spouse, ex-spouse, defacto spouse, child or step-child (whether natural or by adoption), parent, step-parent, grandparent, step-grandparent, uncle, aunt, niece, nephew, brother, sister, step-brother, step-sister or first cousin.
  7. To enter, individuals must, during the Promotional Period:
    1. Visit the ‘Clipsal at Home’ web page, or any of its linked pages and fill in all required fields of the competition form that will appear as a pop up option.
    2. Or sign up at the Clipsal stand at the Sydney HIA Home Show 5-7 th April: ICC Sydney, Darling Harbour.
    3. Or sign up via ROKT lead generation promotion.
    4. Or opt in using the Clipsal Smart Home Selector tool.
  8. There is one major prize to be won, consisting of the winners choice of Clipsal home electrical and smart home products. The major prize has a total value of approximately $20,000, including approx. $15,000 worth of Clipsal home electrical or smart home products and $5,000 towards the cost of installing the products. The $15,000 worth of Clipsal products is chosen by the winner. The winner will be contacted by a Clipsal Consumer Support Agent within two weeks of the prize being drawn to arrange a compulsory consultation with a Clipspec Consultant, at which time a customised prize package (up to the value of $15,000) will be created. The $5,000 towards the cost of installing the products will be awarded to the winner in the form of prepaid VISA gift cards, with the intention that it will be used to pay the electrical contractor conducting the install at the appropriate time.
  9. The winner will be selected via registered electronic draw Approval No: 1224 at Schneider Electric Adelaide Office: 33 – 37 Port Wakefield Road Gepps Cross on Wednesday 27 November 2019 at 2.00pm (AEST).
  10. The winners will be notified by telephone and in writing by a Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  11. The winners name will be published in The Australian newspaper on Saturday 30th November 2019.
  12. By entering the competition and agreeing to these terms and conditions, the winner automatically consents to approval of a case study showcasing the Clipsal solutions selected for installation. This will involve an interview with a Clipsal representative (either in person or via phone) and photographs/videos being taken of their home (at no cost to them). The results of this will be presented in the form of a written story with video imagery to accompany which can be used in any form of media or promotional purposes for an unlimited amount of time (see clause 21).
  13. The Promoter reserves the right, at any time, to verify the validity of entries, registrations and entrants (including an entrant’s identity, age and place of residence) and to disqualify any entrant who submits an entry or registration that is not in accordance with these Terms and Conditions or who tampers with the entry/registration process. Errors and omissions may be accepted at the Promoter's discretion. Failure by the Promoter to enforce any of its rights at any stage does not constitute a waiver of those rights.
  14. Subject to the unclaimed prize draw clause, if for any reason a winner does not take a prize by the time stipulated by the Promoter, then the prize will be forfeited.
  15. If any prize is unavailable, the Promoter, in its discretion, reserves the right to substitute the prize with a prize to the equal value and/or specification, subject to the relevant authorities.
  16. Unclaimed Prize Draw: The winners are given 3 months to claim their prize. Should it necessary a redraw will take place for all unclaimed prizes on Friday 28th February 2020 at Clipsal by Schneider Electric Adelaide Office (33-37 Port Wakefield Road, Gepps Cross, SA 5094) at 2.00pm (AEST). The winner will be notified by telephone and in writing by a Schneider Electric or Clipsal by Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  17. The redrawn winners name will be published in The Australian newspaper on Friday 6th March 2020.
  18. The Prize is not transferable or exchangeable and cannot be taken as cash.
  19. If a Prize is not available for any reason, the Promoter may substitute an alternative prize to at least the value and of a similar standard as the Prize that is not available.
  20. The promoter makes no representation or warranty about the fitness for purpose or merchantable quality of the Prize.
  21. Entrants consent to the Promoter using their name and/or image in the event they are a winner in any media for an unlimited period without remuneration for its promotional and publicity purposes.
  22. The Promoter may, subject to any written directions from a regulatory authority, modify, suspend, terminate or cancel the promotion, as appropriate.
  23. The Promoter collects personal information in order to conduct the promotion and may, for this purpose, disclose such information to third parties, including but not limited to agents, contractors, service providers, prize suppliers and, as required, to Australian regulatory authorities. Entry is conditional on providing this information. The Promoter may, for an indefinite period, unless otherwise advised, use the information for promotional, marketing, publicity, research and profiling purposes, including sending electronic messages or telephoning the Eligible Entrant. Eligible Entrants should direct any request to opt out, access, update or correct information to the Promoter. All entries become the property of the Promoter.
  24. The Promoter’s and judges’ decision is final and no correspondence will be entered into.
  25. If this promotion is interfered with in any way or is not capable of being conducted as reasonably anticipated due to any reason beyond the reasonable control of the Promoter, including but not limited to technical difficulties, unauthorised intervention or fraud, the Promoter reserves the right, in its sole discretion, to the fullest extent permitted by law (a) to disqualify any entrant; or (b) subject to any written directions from a regulatory authority, to modify, suspend, terminate or cancel the promotion, as appropriate.
  26. Nothing in these Terms and Conditions limits, excludes or modifies or purports to limit, exclude or modify the statutory consumer guarantees as provided under the Competition and Consumer Act, as well as any other implied warranties under similar consumer protection laws in the State and Territories of Australia (Non-Excludable Guarantees). Except for any liability that cannot by law be excluded, including the Non-Excludable Guarantees, the Promoter (including its respective officers, employees and agents) is not responsible for and excludes all liability for any personal injury or any loss or damage whether direct, indirect, special or consequential arising in any way out of the promotion or use of a Prize.
  27. The Promoter is Schneider Electric (Australia) Pty Ltd (ABN 42 004 969 304) of 78 Waterloo Rd, Macquarie Park, NSW 2113.
Soft start - soft stop units Altistart 22 - size 2 - 3/4 view
Soft start - soft stop units Altistart 22 range - size 2 - front view
Soft start - soft stop units Altistart 22 - size 2 - 3/4 view
Soft start - soft stop units Altistart 22 range - size 2 - front view

ATS22D88Q

Altistart 22 Soft Starter ATS22 Control, 220V Power 230V(22kW)/400...440V(45kW)

Soft start - soft stop units Altistart 22 - size 2 - 3/4 view
Soft start - soft stop units Altistart 22 range - size 2 - front view
Soft start - soft stop units Altistart 22 - size 2 - 3/4 view
Soft start - soft stop units Altistart 22 range - size 2 - front view
Colour:
Colour: Per UOM Std.
  • 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
Range of product
Altistart 22
Product or component type
soft starter
Product destination
asynchronous motors
Product specific application
pumps and fans
Component name
ATS22
Network number of phases
3 phases
[Us] rated supply voltage
230...440 V - 15...10 %
Motor power kW
  • 22 kW 230 V
  • 45 kW 400 V
  • 45 kW 440 V
    • Factory setting current
      81 A
      Power dissipation in W
      66 W for standard applications
      Utilisation category
      AC-53A
      Type of start
      start with torque control (current limited to 3.5 In)
      IcL starter rating
      88 A for connection in the motor supply line for standard applications
      IP degree of protection
      IP20
      Assembly style
      with heat sink
      Function available
      internal bypass
      Supply voltage limits
      195-484 V
      Supply frequency
      50...60 Hz - 10...10 %
      Network frequency
      45...66 Hz
      Device connection
    • to the motor delta terminals
    • in the motor supply line
      • [Uc] control circuit voltage
        230 V - 15...10 % 50/60 Hz
        Control circuit consumption
        20 W
        Discrete output number
        2
        Discrete output type
      • relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
      • relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
        • Minimum switching current
          100 mA at 12 V DC (relay outputs)
          Maximum switching current
        • 5 A 250 V AC resistive 1 relay outputs
        • 5 A 30 V DC resistive 1 relay outputs
        • 2 A 250 V AC inductive 0.4 20 ms relay outputs
        • 2 A 30 V DC inductive 7 ms relay outputs
          • Discrete input number
            3
            Discrete input type
            (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
            Discrete input voltage
            24 V <= 30 V
            Discrete input logic
            positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
            Output current
            0.4...1 Icl adjustable
            PTC probe input
            750 Ohm
            Communication port protocol
            Modbus
            Connector type
            1 RJ45
            Communication data link
            serial
            Physical interface
            RS485 multidrop
            Transmission rate
            4800, 9600 or 19200 bps
            Installed device
            31
            Protection type
          • phase failure: line
          • thermal protection: motor
          • thermal protection: starter
            • Marking
              CE
              Type of cooling
              forced convection
              Operating position
              vertical +/- 10 degree
              Height
              295 mm
              Width
              145 mm
              Depth
              207 mm
              Net weight
              12 kg
              Power range
            • 15-25 kW at 200-240 V 3 phases
            • 30-50 kW at 380-440 V 3 phases
              • Motor starter type
                soft starter
                Electromagnetic compatibility
              • conducted and radiated emissions level A conforming to IEC 60947-4-2
              • damped oscillating waves level 3 conforming to IEC 61000-4-12
              • electrostatic discharge level 3 conforming to IEC 61000-4-2
              • immunity to electrical transients level 4 conforming to IEC 61000-4-4
              • immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
              • voltage/current impulse level 3 conforming to IEC 61000-4-5
                • Standards
                  EN/IEC 60947-4-2
                  Product certifications
                • CCC
                • CSA
                • UL
                • GOST
                • C-Tick
                  • Vibration resistance
                  • 1 gn (f= 13-200 Hz) conforming to EN/IEC 60068-2-6
                  • 1.5 mm (f= 2-13 Hz) conforming to EN/IEC 60068-2-6
                    • Shock resistance
                      15 gn for 11 ms conforming to EN/IEC 60068-2-27
                      Noise level
                      45 dB
                      Pollution degree
                      level 2 conforming to IEC 60664-1
                      Relative humidity
                      0-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
                      Ambient air temperature for operation
                    • -10-40 °C (without)
                    • 40-60 °C (with current derating 2.2 % per °C)
                      • Ambient air temperature for storage
                        -25-70 °C
                        Operating altitude
                      • <= 1000 m without
                      • > 1000...< 2000 m with current derating of 2.2 % per additional 100 m
                        • Sustainable offer status
                          Green Premium product
                          REACh Regulation
                          Reference contains Substances of Very High Concern above the threshold
                          EU RoHS Directive
                          Pro-active compliance (Product out of EU RoHS legal scope)
                          Mercury free
                          Yes
                          RoHS exemption information
                          Yes
                          China RoHS Regulation
                          X
                          Environmental Disclosure
                          ENVPEP100403EN
                          Circularity Profile
                          ENVEOLI110803EN
                          WEEE
                          The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
                          CALIFORNIA PROPOSITION 65
                          WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
                          Warranty
                          18 months

                          Documents & downloads

                          hide show
                          Filter items
                          • All

                          • Product Brochures

                          • CAD Files and Packs

                          • Technical Data Catalogues

                          • Technical Leaflet

                          • End of Life Manual

                          • Product Environmental

                          • Installation Instruction

                          • Handout

                          • Data Bulletin

                          • Operating Manuals

                          • System User Guide

                          • Specifications

                          • Specification for Tender

                          • Application Solutions

                          • Certificates (MSDS)

                          • eTechPub

                          • Marine Certificate

                          • DTM Files

                          • Software - Released

                          Frequently Asked Questions

                          hide show

                          What is the part number for soft starter 45KW?