MASTER YOUR CASTLE with your new build or reno project
Enter competition

Building or Renovating?

Master your castle with the ultimate electrical and smart home package, valued at $20,000, for your new build or reno project.

Click on the link below to enter your details for your chance to WIN!

Complete your details

Your Details

Enter the prize draw

Thanks for entering

The lucky winner will be notified by phone and email on 27th November 2019.

Why not spread the word and increase your chances of winning? Each social media share will earn you an extra entry into the draw and bring Clipsal by Schneider Electric another step closer to empowering a community in need.

The competition has now closed.

The winning entry will be drawn Tuesday 27 November 2019 at 2.00pm (AEST).
The winner’s name will be published in The Australian newspaper on Saturday 1st December 2019, but will also be contacted via email and phone on the day of the draw.

We've got the winner!


What do you need to 'Master Your Castle'?

Clipsal's Master Your Castle promotion gives you the chance to go into the running to win an ultimate home electrical and smart home package. Whether you are building your dream home or renovating your much loved house, winning this house lot of Clipsal products will help you master your castle.

Receive a Clipspec consultation to design the ultimate customised electrical package, tailor-made for your home.

Walk through your house plans with an expert and select $15,000 worth of Clipsal electrical products. Choose from: LED downlights, exterior wall lights, floodlights, switches, dimmers, power points, bluetooth speakers, motion sensors, smoke alarms, ceiling fans, smart home solutions, or anything else Clipsal has to offer. Then receive $5,000 towards the installation of your selected products.


  1. Information on how to enter and the prizes forms part of these Terms and Conditions.

  2. Participation in this promotion is deemed acceptance of these Terms and Conditions.

  3. The Promotional Period commences on Friday 29 March 2019 10.00am (AEST) and closes on Wednesday 20 November 2019 at 9.00pm (AEST).
  4. Entry is open to Australian residents over the age of 18 only.
  5. There is a limit of one entry per person, unless the promoter offers additional entries via a social media promotion, in which case, additional entries will be automatically added on the participants behalf by the promoter.
  6. Employees (and their immediate families) of the Promoter(s) and associated agencies are ineligible to enter. Immediate family means any of the following: spouse, ex-spouse, defacto spouse, child or step-child (whether natural or by adoption), parent, step-parent, grandparent, step-grandparent, uncle, aunt, niece, nephew, brother, sister, step-brother, step-sister or first cousin.
  7. To enter, individuals must, during the Promotional Period:
    1. Visit the ‘Clipsal at Home’ web page, or any of its linked pages and fill in all required fields of the competition form that will appear as a pop up option.
    2. Or sign up at the Clipsal stand at the Sydney HIA Home Show 5-7 th April: ICC Sydney, Darling Harbour.
    3. Or sign up via ROKT lead generation promotion.
    4. Or opt in using the Clipsal Smart Home Selector tool.
  8. There is one major prize to be won, consisting of the winners choice of Clipsal home electrical and smart home products. The major prize has a total value of approximately $20,000, including approx. $15,000 worth of Clipsal home electrical or smart home products and $5,000 towards the cost of installing the products. The $15,000 worth of Clipsal products is chosen by the winner. The winner will be contacted by a Clipsal Consumer Support Agent within two weeks of the prize being drawn to arrange a compulsory consultation with a Clipspec Consultant, at which time a customised prize package (up to the value of $15,000) will be created. The $5,000 towards the cost of installing the products will be awarded to the winner in the form of prepaid VISA gift cards, with the intention that it will be used to pay the electrical contractor conducting the install at the appropriate time.
  9. The winner will be selected via registered electronic draw Approval No: 1224 at Schneider Electric Adelaide Office: 33 – 37 Port Wakefield Road Gepps Cross on Wednesday 27 November 2019 at 2.00pm (AEST).
  10. The winners will be notified by telephone and in writing by a Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  11. The winners name will be published in The Australian newspaper on Saturday 30th November 2019.
  12. By entering the competition and agreeing to these terms and conditions, the winner automatically consents to approval of a case study showcasing the Clipsal solutions selected for installation. This will involve an interview with a Clipsal representative (either in person or via phone) and photographs/videos being taken of their home (at no cost to them). The results of this will be presented in the form of a written story with video imagery to accompany which can be used in any form of media or promotional purposes for an unlimited amount of time (see clause 21).
  13. The Promoter reserves the right, at any time, to verify the validity of entries, registrations and entrants (including an entrant’s identity, age and place of residence) and to disqualify any entrant who submits an entry or registration that is not in accordance with these Terms and Conditions or who tampers with the entry/registration process. Errors and omissions may be accepted at the Promoter's discretion. Failure by the Promoter to enforce any of its rights at any stage does not constitute a waiver of those rights.
  14. Subject to the unclaimed prize draw clause, if for any reason a winner does not take a prize by the time stipulated by the Promoter, then the prize will be forfeited.
  15. If any prize is unavailable, the Promoter, in its discretion, reserves the right to substitute the prize with a prize to the equal value and/or specification, subject to the relevant authorities.
  16. Unclaimed Prize Draw: The winners are given 3 months to claim their prize. Should it necessary a redraw will take place for all unclaimed prizes on Friday 28th February 2020 at Clipsal by Schneider Electric Adelaide Office (33-37 Port Wakefield Road, Gepps Cross, SA 5094) at 2.00pm (AEST). The winner will be notified by telephone and in writing by a Schneider Electric or Clipsal by Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  17. The redrawn winners name will be published in The Australian newspaper on Friday 6th March 2020.
  18. The Prize is not transferable or exchangeable and cannot be taken as cash.
  19. If a Prize is not available for any reason, the Promoter may substitute an alternative prize to at least the value and of a similar standard as the Prize that is not available.
  20. The promoter makes no representation or warranty about the fitness for purpose or merchantable quality of the Prize.
  21. Entrants consent to the Promoter using their name and/or image in the event they are a winner in any media for an unlimited period without remuneration for its promotional and publicity purposes.
  22. The Promoter may, subject to any written directions from a regulatory authority, modify, suspend, terminate or cancel the promotion, as appropriate.
  23. The Promoter collects personal information in order to conduct the promotion and may, for this purpose, disclose such information to third parties, including but not limited to agents, contractors, service providers, prize suppliers and, as required, to Australian regulatory authorities. Entry is conditional on providing this information. The Promoter may, for an indefinite period, unless otherwise advised, use the information for promotional, marketing, publicity, research and profiling purposes, including sending electronic messages or telephoning the Eligible Entrant. Eligible Entrants should direct any request to opt out, access, update or correct information to the Promoter. All entries become the property of the Promoter.
  24. The Promoter’s and judges’ decision is final and no correspondence will be entered into.
  25. If this promotion is interfered with in any way or is not capable of being conducted as reasonably anticipated due to any reason beyond the reasonable control of the Promoter, including but not limited to technical difficulties, unauthorised intervention or fraud, the Promoter reserves the right, in its sole discretion, to the fullest extent permitted by law (a) to disqualify any entrant; or (b) subject to any written directions from a regulatory authority, to modify, suspend, terminate or cancel the promotion, as appropriate.
  26. Nothing in these Terms and Conditions limits, excludes or modifies or purports to limit, exclude or modify the statutory consumer guarantees as provided under the Competition and Consumer Act, as well as any other implied warranties under similar consumer protection laws in the State and Territories of Australia (Non-Excludable Guarantees). Except for any liability that cannot by law be excluded, including the Non-Excludable Guarantees, the Promoter (including its respective officers, employees and agents) is not responsible for and excludes all liability for any personal injury or any loss or damage whether direct, indirect, special or consequential arising in any way out of the promotion or use of a Prize.
  27. The Promoter is Schneider Electric (Australia) Pty Ltd (ABN 42 004 969 304) of 78 Waterloo Rd, Macquarie Park, NSW 2113.
Universal Power Supply 20A 3p


Phaseo Regulated SMPS, 3 Phase, 380..500VAC, 24V, 20A

Universal Power Supply 20A 3p
Colour: Per UOM Std.
  • 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
Range of product
Product or component type
power supply
Power supply type
regulated switch mode
Input voltage
380...500 V AC three phase, terminal(s): L1, L2, L3
Output voltage
24 V DC
Rated power in W
480 W
Provided equipment
power factor correction filter conforming to IEC 61000-3-2
Power supply output current
20 A
Output protection type
  • against overload, protection technology: manual or automatic reset
  • against overvoltage, protection technology: 30...32 V, manual reset
  • against short-circuits, protection technology: manual or automatic reset
  • against undervoltage, protection technology: tripping if U < 21.6 V
  • thermal, protection technology: automatic reset
    • Ambient air temperature for operation
    • 50-60 °C (with derating factor)
    • -25-50 °C (without)
      • Input voltage limits
        320...550 V
        Network frequency
        47...63 Hz
        Inrush current
        25 A 2 ms
        Cos phi
        92 %
        Output voltage limits
        24...28.8 V adjustable
        Power dissipation in W
        38.4 W
        Line and load regulation
        1...3 %
        Holding time
        >= 18 ms at 400 V
        Permissible temporary current boost
        1.5 x In (for 4 s)
        Connections - terminals
      • for diagnostic relay: removable screw terminal block, connection capacity: 2 x 2.5 mm²
      • for input connection: screw type terminals, connection capacity: 3 x 0.5...3 x 4 mm² AWG 22...AWG 12
      • for input ground connection: screw type terminals, connection capacity: 1 x 0.5...1 x 4 mm² AWG 22...AWG 12
      • for output connection: screw type terminals, connection capacity: 4 x 0.5...4 x 10 mm² AWG 22...AWG 8
        • Marking
          Mounting support
        • 35 x 7.5 mm symmetrical DIN rail
        • 35 x 15 mm symmetrical DIN rail
          • Operating position
            Operating altitude
            2000 m
            Output coupling
          • series
          • parallel
            • Name of test
            • electrostatic discharges conforming to EN/IEC 61000-4-2
            • induced electromagnetic field conforming to EN/IEC 61000-4-6
            • magnetic field conforming to EN 61000-4-8
            • primary outage conforming to IEC 61000-4-11
            • radiated electromagnetic field conforming to EN/IEC 61000-4-3
            • rapid transient conforming to IEC 61000-4-4
            • surge conforming to EN/IEC 61000-4-5
            • conducted emissions on the power line conforming to EN 55022 class B
            • radiated emissions conforming to EN 55022 class B
            • harmonic current emission conforming to EN/IEC 61000-3-2
              • Status LED
              • output voltage: 1 LED (green and red)
              • output current: 1 LED (green, red and orange)
                • Depth
                  160 mm
                  143 mm
                  96 mm
                  Net weight
                  1.6 kg
                  Anti-harmonic filter
                  low frequency harmonic currents
                  Compatibility code
                  MTBF reliability
                • 691000 H at 320 V AC with UTE C80-810 calculation method
                • 670000 H at 550 V AC with UTE C80-810 calculation method
                  • Product certifications
                  • cCSAus
                  • EAC
                  • UL
                  • RCM
                    • Standards
                    • CSA C22.2 No 60950-1
                    • UL 508
                      • Environmental characteristic
                      • EMC conforming to EN 61000-6-1
                      • EMC conforming to EN 61000-6-3
                      • EMC conforming to EN 55024
                      • EMC conforming to EN/IEC 61000-6-4
                      • EMC conforming to EN/IEC 61204-3
                      • safety conforming to EN 61204-4
                      • safety conforming to EN/IEC 60950-1
                      • safety conforming to SELV
                        • IP degree of protection
                          IP20 conforming to EN/IEC 60529
                          Ambient air temperature for storage
                          -40-70 °C
                          Relative humidity
                        • 0-90 % during operation
                        • 0-95 % in storage
                          • Overvoltage category
                            class I conforming to VDE 0106-1
                            Dielectric strength
                          • 3500 V between input and ground
                          • 4000 V between input and output
                          • 500 V between output and ground
                            • Sustainable offer status
                              Green Premium product
                              REACh Regulation
                              Reference contains Substances of Very High Concern above the threshold
                              EU RoHS Directive
                              Pro-active compliance (Product out of EU RoHS legal scope)
                              Mercury free
                              RoHS exemption information
                              China RoHS Regulation
                              Environmental Disclosure
                              Circularity Profile
                              18 months

                              Documents & downloads

                              hide show
                              Filter items
                              • All

                              • CAD Files and Packs

                              • Product Brochures

                              • Technical Data Catalogues

                              • Product Environmental

                              • Installation Instruction

                              • End of Life Manual

                              • Data Bulletin

                              • Handout

                              • Operating Manuals

                              • eTechPub

                              • Certificates (MSDS)

                              • Declaration of Conformity

                              Frequently Asked Questions

                              hide show

                              What is the replacement for a ABL8WPS24200

                              Use a ABL4WSR24200.

                              What is the operating temperature range on the ABL8WPS24200 and ABL8WPS24400 power supplies?

                              Needs environmental data for ABL8WPS24200 and ABL8WPS24400.

                              Product Line:
                              ABL8WPS24200 and ABL8WPS24400

                              ABL Power Supplies
                              Per expanded catalog DIA3ED207041EN-US, page 30 "-13°F to 140°F with derating from 122 °F or  (-25 to +60 derating from 50°C)"