smoke alarm photo flush
755PFM4 side image
755PFM4 front image
smoke alarm photo flush
755PFM4 side image
755PFM4 front image

SMOKE ALARM PHOTO, FLUSH, 230V

Catalogue Number: 755PFM4
smoke alarm photo flush
755PFM4 side image
755PFM4 front image
smoke alarm photo flush
755PFM4 side image
755PFM4 front image
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Range
Firetek
Product brand
Clipsal
Product or component type
smoke detector
Device application
early detection of smouldering fires and open fires
Electronic sensor type
photo-electric sensor
Quantity per set
set of 1
Type of packing
carton
Supply
mains
[Us] rated supply voltage
220...240 V AC 50 Hz
Backup type
battery
Battery type
alkaline 9 V 6LR61
Battery life
1 year(s)
[In] rated current
  • 13-13 µA at 9 V DC not in operation
  • 40-40 mA at 9 V DC operation
    • Output voltage limits
      interconnection: 6.5...20 V
      Type of alarms
      low battery at 6.9...7.5 V
      Detection type
      smoke
      Device composition
    • 1 smoke detector
    • 1 mounting base
    • 1 dust protection foil
    • 1 user guide
    • 3 screws
    • 1 sticker sheet
      • Function available
      • local alarm
      • hush function
      • self-test of smoke detection
        • Technology type
          scattered light (Tyndall effect)
          Type of measurement
          optic
          Number of devices
          40 for wired alarm wired over <= 150 m
          Noise level
          85 dB at 3 m, minimum
          Local signalling
        • sound: signal
        • visual: LED (red) for warning and low battery
        • visual: LED (green) for ON status
          • Connections - terminals
          • screw terminal (line) - 2 x 1...3 x 2.5 mm²
          • screw terminal (neutral) - 2 x 1...3 x 2.5 mm²
          • screw terminal (earth loop) - 2 x 1...3 x 2.5 mm²
          • screw terminal (interconnect) - 2 x 1...3 x 2.5 mm²
            • Material
              PC (polycarbonate)
              Type of installation
              indoor
              Device mounting
              flush
              Mounting support
              ceiling
              Fixing mode
              by screws
              Diameter
              108 mm
              Depth
              102.6 mm
              Projecting depth
              23 mm
              Net weight
              263 g
              IP degree of protection
              IP20
              Ambient air temperature for operation
              0-45 °C
              Relative humidity
              5-95 %
              Product certifications
            • RCM
            • SAI
            • Activfire
              • Standards
              • ISO 8201
              • AS 3786:2014
              • AS/NZS 60950.1
              • AS/NZS 60065
                • Directives
                • 1907/2006/EC - REACH directive
                • 2011/65/EU - RoHS directive
                  • Sustainable offer status
                    Green Premium product
                    REACh Regulation
                    Free of Substances of Very High Concern above the threshold
                    REACh free of SVHC
                    Yes
                    EU RoHS Directive
                    Compliant
                    Mercury free
                    Yes
                    RoHS exemption information
                    Yes
                    China RoHS Regulation
                    X
                    Environmental Disclosure
                    ENVPEP1907002EN
                    Circularity Profile
                    ENVEOLI1907002EN

                    Frequently Asked Questions

                    hide show

                    Will 755PFM photoelectric alarm fit in the existing base of 755FM ionization alarm?

                    Yes. 755PFM photoelectric alarm can be fitted on to the existing base of 755FM ionization smoke alarm.
                    For further information of 755PFM, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=755PFM

                    How far is the 755PFM recessed?

                    The recess on our 755PFM is 80mm.

                    What is the part number for an isolation unit to wire , alarm , extra warning lights etc. to the 755PFM?

                    The part number for an isolation unit to wire , alarm , extra warning lightsetc. to the 755PFM is - 756

                    For further information , visit link below:-
                    https://www.clipsal.com/Trade/search-results?q=756
                     

                    What are the dimensions of the 755PFM?


                    The 755PFM has the following dimensions.
                    Diameter: 108mm
                    Depth: 102mm
                    Visible Depth: 23mm
                    Recessed Depth: 79mm
                    Hole Cut Out: 90mm (suits 3.5' Holesaw)
                    Cable Range: 1.00mm to 2.5mm with up to three conductors per terminal, allowing daisy chain operations of upto 40 alarms over 150 Metres
                    For further information on this product please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=755PFM
                     

                    Is the 755PSMA2 be interconnectible with the 755PFM?

                    Yes, they are interconnectible with each other

                    Do you have a concrete screed box for the 755PFM?

                    No unfortunately this is unavailable. this smoke alarm is designed for gyprock.

                    Is the 755FM interchangeable with the 755PFM?

                    Yes as they are essentially the same physical dimensions and have the same input prongs however the internal operating function is the only difference.

                    What is the cut out for 755PFM smoke alarm?

                    The cut out is 90mm diameter

                    Is the Clipsal 755PFM smoke alarm photoelectric

                    Yes it is

                    What is the part Number for the Clipsal Flush mounted smoke detector ?

                    The part number is 755PFM for photoelectric type and 755FM for Ionisation

                    Please find attached pdf on these alarms

                    For further information please visit the Clipsal Web site on the link provided.
                    https://www.clipsal.com/Trade/search-results?q=755p

                    What is the Cut-Out Hole Size or Mounting Hole Size for a Clipsal 755PFM and 755FM

                     It is 90mm.
                    See attached pdf for more information.

                    The installation sheet for 755FM is available at :  https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0000802.pdf

                    The installation sheet for 755PFM is available at:  https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0000801.pdf

                    What are the dimensions of the 755PFM?

                    The 755PFM has the following dimensions.
                    Diameter: 108mm
                    Depth: 102mm
                    Visible Depth: 23mm
                    Recessed Depth: 79mm
                    Hole Cut Out: 90mm (suits 3.5' Holesaw)
                    Cable Range: 1.00mm to 2.5mm with up to three conductors per terminal, allowing daisy chain operations of upto 40 alarms over 150 Metres
                    For further information on this product please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=755PFM
                    Show More