MASTER YOUR CASTLE with your new build or reno project

Enter competition
DETAILS PRIZES T&CS

Building or Renovating?

Master your castle with the ultimate electrical and smart home package, valued at $20,000, for your new build or reno project.

Click on the link below to enter your details for your chance to WIN!

Complete your details

Your Details

Enter the prize draw

Thanks for entering

The lucky winner will be notified by phone and email on 27th November 2019.

Why not spread the word and increase your chances of winning? Each social media share will earn you an extra entry into the draw and bring Clipsal by Schneider Electric another step closer to empowering a community in need.

The competition has now closed.

The winning entry will be drawn Tuesday 27 November 2019 at 2.00pm (AEST).
The winner’s name will be published in The Australian newspaper on Saturday 1st December 2019, but will also be contacted via email and phone on the day of the draw.

We've got the winner!

 

What do you need to 'Master Your Castle'?

Clipsal's Master Your Castle promotion gives you the chance to go into the running to win an ultimate home electrical and smart home package. Whether you are building your dream home or renovating your much loved house, winning this house lot of Clipsal products will help you master your castle.

Default
house lot of clipsal products

Receive a Clipspec consultation to design the ultimate customised electrical package, tailor-made for your home.

Walk through your house plans with an expert and select $15,000 worth of Clipsal electrical products. Choose from: LED downlights, exterior wall lights, floodlights, switches, dimmers, power points, bluetooth speakers, motion sensors, smoke alarms, ceiling fans, smart home solutions, or anything else Clipsal has to offer. Then receive $5,000 towards the installation of your selected products.

TERMS AND CONDITIONS

  1. Information on how to enter and the prizes forms part of these Terms and Conditions.
  2. Participation in this promotion is deemed acceptance of these Terms and Conditions.
  3. The Promotional Period commences on Friday 29 March 2019 10.00am (AEST) and closes on Wednesday 20 November 2019 at 9.00pm (AEST).
  4. Entry is open to Australian residents over the age of 18 only.
  5. There is a limit of one entry per person, unless the promoter offers additional entries via a social media promotion, in which case, additional entries will be automatically added on the participants behalf by the promoter.
  6. Employees (and their immediate families) of the Promoter(s) and associated agencies are ineligible to enter. Immediate family means any of the following: spouse, ex-spouse, defacto spouse, child or step-child (whether natural or by adoption), parent, step-parent, grandparent, step-grandparent, uncle, aunt, niece, nephew, brother, sister, step-brother, step-sister or first cousin.
  7. To enter, individuals must, during the Promotional Period:
    1. Visit the ‘Clipsal at Home’ web page, or any of its linked pages and fill in all required fields of the competition form that will appear as a pop up option.
    2. Or sign up at the Clipsal stand at the Sydney HIA Home Show 5-7 th April: ICC Sydney, Darling Harbour.
    3. Or sign up via ROKT lead generation promotion.
    4. Or opt in using the Clipsal Smart Home Selector tool.
  8. There is one major prize to be won, consisting of the winners choice of Clipsal home electrical and smart home products. The major prize has a total value of approximately $20,000, including approx. $15,000 worth of Clipsal home electrical or smart home products and $5,000 towards the cost of installing the products. The $15,000 worth of Clipsal products is chosen by the winner. The winner will be contacted by a Clipsal Consumer Support Agent within two weeks of the prize being drawn to arrange a compulsory consultation with a Clipspec Consultant, at which time a customised prize package (up to the value of $15,000) will be created. The $5,000 towards the cost of installing the products will be awarded to the winner in the form of prepaid VISA gift cards, with the intention that it will be used to pay the electrical contractor conducting the install at the appropriate time.
  9. The winner will be selected via registered electronic draw Approval No: 1224 at Schneider Electric Adelaide Office: 33 – 37 Port Wakefield Road Gepps Cross on Wednesday 27 November 2019 at 2.00pm (AEST).
  10. The winners will be notified by telephone and in writing by a Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  11. The winners name will be published in The Australian newspaper on Saturday 30th November 2019.
  12. By entering the competition and agreeing to these terms and conditions, the winner automatically consents to approval of a case study showcasing the Clipsal solutions selected for installation. This will involve an interview with a Clipsal representative (either in person or via phone) and photographs/videos being taken of their home (at no cost to them). The results of this will be presented in the form of a written story with video imagery to accompany which can be used in any form of media or promotional purposes for an unlimited amount of time (see clause 21).
  13. The Promoter reserves the right, at any time, to verify the validity of entries, registrations and entrants (including an entrant’s identity, age and place of residence) and to disqualify any entrant who submits an entry or registration that is not in accordance with these Terms and Conditions or who tampers with the entry/registration process. Errors and omissions may be accepted at the Promoter's discretion. Failure by the Promoter to enforce any of its rights at any stage does not constitute a waiver of those rights.
  14. Subject to the unclaimed prize draw clause, if for any reason a winner does not take a prize by the time stipulated by the Promoter, then the prize will be forfeited.
  15. If any prize is unavailable, the Promoter, in its discretion, reserves the right to substitute the prize with a prize to the equal value and/or specification, subject to the relevant authorities.
  16. Unclaimed Prize Draw: The winners are given 3 months to claim their prize. Should it necessary a redraw will take place for all unclaimed prizes on Friday 28th February 2020 at Clipsal by Schneider Electric Adelaide Office (33-37 Port Wakefield Road, Gepps Cross, SA 5094) at 2.00pm (AEST). The winner will be notified by telephone and in writing by a Schneider Electric or Clipsal by Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  17. The redrawn winners name will be published in The Australian newspaper on Friday 6th March 2020.
  18. The Prize is not transferable or exchangeable and cannot be taken as cash.
  19. If a Prize is not available for any reason, the Promoter may substitute an alternative prize to at least the value and of a similar standard as the Prize that is not available.
  20. The promoter makes no representation or warranty about the fitness for purpose or merchantable quality of the Prize.
  21. Entrants consent to the Promoter using their name and/or image in the event they are a winner in any media for an unlimited period without remuneration for its promotional and publicity purposes.
  22. The Promoter may, subject to any written directions from a regulatory authority, modify, suspend, terminate or cancel the promotion, as appropriate.
  23. The Promoter collects personal information in order to conduct the promotion and may, for this purpose, disclose such information to third parties, including but not limited to agents, contractors, service providers, prize suppliers and, as required, to Australian regulatory authorities. Entry is conditional on providing this information. The Promoter may, for an indefinite period, unless otherwise advised, use the information for promotional, marketing, publicity, research and profiling purposes, including sending electronic messages or telephoning the Eligible Entrant. Eligible Entrants should direct any request to opt out, access, update or correct information to the Promoter. All entries become the property of the Promoter.
  24. The Promoter’s and judges’ decision is final and no correspondence will be entered into.
  25. If this promotion is interfered with in any way or is not capable of being conducted as reasonably anticipated due to any reason beyond the reasonable control of the Promoter, including but not limited to technical difficulties, unauthorised intervention or fraud, the Promoter reserves the right, in its sole discretion, to the fullest extent permitted by law (a) to disqualify any entrant; or (b) subject to any written directions from a regulatory authority, to modify, suspend, terminate or cancel the promotion, as appropriate.
  26. Nothing in these Terms and Conditions limits, excludes or modifies or purports to limit, exclude or modify the statutory consumer guarantees as provided under the Competition and Consumer Act, as well as any other implied warranties under similar consumer protection laws in the State and Territories of Australia (Non-Excludable Guarantees). Except for any liability that cannot by law be excluded, including the Non-Excludable Guarantees, the Promoter (including its respective officers, employees and agents) is not responsible for and excludes all liability for any personal injury or any loss or damage whether direct, indirect, special or consequential arising in any way out of the promotion or use of a Prize.
  27. The Promoter is Schneider Electric (Australia) Pty Ltd (ABN 42 004 969 304) of 78 Waterloo Rd, Macquarie Park, NSW 2113.
Image of 753-WE 360 Degrees Infrascan Passive Infrared Motions Sensor

753

Passive Infrared Sensor, 2 Wire, 2A, Flush Mount, 360deg

Image of 753-WE 360 Degrees Infrascan Passive Infrared Motions Sensor
Colour: White Electric
Colour: Per UOM Std.
  • White Electric 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
  • Maximum load current: 2A
  • Minimum load: 40W
  • Maximum off-state leakage current: 10mA
  • Conductors required: 2 Wire
  • Timer delay range: 5 seconds to 20 minutes, user adjustable
  • Overall dimension: 72mm diameter x 141.5mm high
Range of product
Infrascan
Range
Infrascan
Product brand
Clipsal
Product or component type
movement sensor
[Ue] rated operational voltage
200...265 V
Mounting support
ceiling
Mounting height
2.4 m
Ambient air temperature for operation
0-50 °C
REACh Regulation
Reference contains Substances of Very High Concern above the threshold
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Circularity Profile
ENVEOLI121002EN

Frequently Asked Questions

hide show

What is the minimum load on a 753 sensor?

The Standard 753 2 wire sensor has a 40W minimum load.
The 753R 3 wire sensor has no minimum load.

Can a 753 sensor be used with fluro's and electronic ballasts

 No use the 753R

Is the 753 zone mask available as a spare part?

Yes, the zone mask is available as a spare part. The part number is 753MASK.

Some of the key features are:
  • For 753 Series Sensor
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=753MASK


 

Can I get the Clipsal 753 sensor mask as a spare part

Yes - The part code is 753MASK-WE

What is the part no for the 753 plastic cover that is used to adjust the view?

The part name is 753MASK-WE

What is the cover for the 753 sensors to control sensing range?

Yes, the part name for the mask is 753MASK-WE

What is the IP rating of 753 and 753R, 360 degree flush mount PIR motion sensor?

753 and 753R does not have an IP rating. They are designed for indoor use. 753 is a 2-wire (does not require Neutral connection), and can only switch a
limited range of load types. 753R is a 3-wire device (requires Neutral connection to operate) capable of switching a wide range of load types.
For further information, please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001475.pdf

User-added image

 

Can the 100CF360 be fitted with an override?

Unfortunately no, the 100CF360 is not able to be overridden by a wall switch.

However the 753 & 753R is able to be overridden.

For information on the 753 & 753R, please visit https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=753R
User-added image

Why the LED light for a combination of a 753 with LED light strobes, when the sensor switches off? Is there a solution to fix this problem?

Yes there is a solution. Try the following:

Option1: You will need to change your 753 to a 753R
Option 2: use a 31CAP, 31LCDA, or add a relay.

This is a compatibility issue between our sensor and some other company's LED lighting.
This solution will work 95% of the time but not always.
For best results you need to use Clipsal LED lights.

For more information on our sensors visit the website at www.clipsal.com/Trade/search-results and click on the link to view a brochure.

What is the part number of the zone mask suitable for 753 and 753R?

753MASK is the part number of the zone mask suitable for 753 and 753R. The Clipsal 360° Infrascan Zone Mask is designed to block the unit from detecting motion in unwanted trip areas. This might include a smaller office space with an open doorway, where it is not desirable to activate lighting when people pass by the open door.

The Zone Mask incorporates a series of staged ‘tear-away’ sections, allowing full customization of the field of view. Tear away sections where you want detection to take place.
To fit the Zone Mask, remove the surround, and unclip the removable spacer. Clip the Zone Mask in place, and replace the surround.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=753MASK

Does the 753 sensor have sensitivity adjustment?

No, the 753 motion sensor does not have sensitivity adjustment.

Some of the key features are:
  • Conductors required: 2 Wire
  • Timer delay range: 5 seconds to 20 minutes, user adjustable
  • Overall dimension: 72mm diameter x 141.5mm high

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=753
 

Can 753 series motion sensors be connected in parallel to a common load?

If parallel connection of multiple motion sensors to control a common load is required, use Cat. No. 753R (3 wire infrascan). Please note more than one 753 (2 wire infrascan) CANNOT be connected in parallel to a common load.
For further information please read the attached installation instruction .

What is the cutout dimensions for a 753?

Cutout dimensions for 753 and 753r is 50mm.

Please follow link below for installation instructions
https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001475.pdf

Is there a mask available for the 5753PEIRL ?

Yes , there is a mask available , this is the 753MASK-we which is used in both the 5753 series and 753 series.
For more information on this range please visit the Clipsal website on the link provided .
https://www.clipsal.com/Trade/search-results?q=753


User-added image

What adjustment options are available on 753 and 753R, 360 degree indoor passive infrared motion sensor?

753 and 753R has the below adjustments:
Time-On Adjustment:
Adjustment Range: Five seconds to 20 minutes. Rotate clockwise to set required time-out period.

Light-Level Adjustment:
Adjustment Range: One lux to full sunlight. Rotate clockwise to avoid having load activated when natural light is adequate.

For further information, please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001475.pdf

What is the IP raiting for the Passive infrared senor 753?

The Passive infrared senor 753 does not have an IP rating as it is only intended on Indoor use.
Some of the Key features are:
  • Maximum load current: 2A
  • Minimum load: 40W
  • Maximum off-state leakage current: 10mA
  • Conductors required: 2 Wire
  • Timer delay range: 5 seconds to 20 minutes, user adjustable
  • Overall dimension: 72mm diameter x 141.5mm high
For more information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=753
 

What type of loads are compatible with 753 & 753R PIR motion sensor?

Please refer to the below chart for load compatibility of a 753 and 753R motion sensor.

For further information please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001475.pdf
User-added image
 

Video: How to Select the Correct Replacement Battery Cartridge (RBC) for your UPS

Issue:
The UPS indicates battery replacement is required or is providing insufficient runtime compared to when the UPS was first put into service.

Product Line:
Smart-UPS and Back-UPS

Environment:
All models, All Serial Numbers

Cause:
Battery replacement is part of the normal maintenance for your UPS.

Resolution:



To determine the correct Replacement Battery Cartridge to purchase for your APC UPS and to see other options available to you, use the UPS Replacement Battery Selector tool on www.apc.com. Before you use this tool, you will need to know your UPS model #.

To find your UPS model #, locate a white bar-code sticker on your UPS. This can be found behind or on the bottom of your UPS. The bar code label will look similar to the one below:






The top row of the bar code sticker indicates the UPS model number. The bottom row indicates the UPS serial number. The first two numbers in the serial number indicate the year that the UPS was manufactured. For example, serial #SB041650513 is a unit manufactured in 2004. The age of the UPS will also help you to determine if you need a replacement battery cartridge. A battery will typically last 3-5 years, varying based on frequency of use, duration of use and environmental conditions such as heat and humidity.

Now that you've acquired your model, go to APC's convenient, easy-to-use UPS Replacement Battery Selector tool. You can simply enter your model # and the Selector will provide you with the available options for upgrading your ups, or purchasing a replacement battery cartridge (RBC).

If you purchase a Replacement Battery cartridge (RBC)  please note that some units contain multiple batteries inside the UPS. The Selector will provide you with a single part # that will contain all the batteries you will need for your UPS model, unless otherwise indicated in the chart.

For example, a model SU700NET has 2 batteries inside. If you purchase qty 1 #RBC5, you will receive a cartridge containing the 2 batteries needed for your unit, hence you only need to purchase one part #RBC5 for your SU700NET.