sock swt 1pole 2.5m 10a 250v

Max 4 Din Rail Mount, Socket Outlet And Enclosures, 250V, 10A, 3 Pin, 2.5 Module

Catalogue Number: 4PSO10
sock swt 1pole 2.5m 10a 250v
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Range of product
Series 4
Product brand
Clipsal
Number of poles
1
Mounting support
DIN rail
[In] rated current
10 A
[Ue] rated operational voltage
230 V 50/60 Hz conforming to EN 60309-2
Voltage colour
blue
Duration
6 h
Socket number
1
EU RoHS Directive
Compliant

Frequently Asked Questions

hide show

What code is a DIN mount socket

4SSO15D = 10A (double pole) switched socket (72mm wide)
4SSO15D15 = 15A (double pole) switched socket (72mm wide)
4PSO10D = 10A auto-switched (double pole) socket (45mm wide)
4PSO10DL = 10A auto-switched (double pole) socket with round earth (45mm wide)
4PSO15D = 15A auto-switched (double pole) socket (45mm wide)

What is the part number for the din mount socket outlet ?

 
 
 
 
The Clipsal Din mount socket outlets are the 4PSO  and 4SSO series ( Eg a 10a version is a 4PSO10 )
For more information on this product range please visit the Clipsal web site on the link provided.
https://www.clipsal.com/Trade/search-results?q=din%20mount%20outlet
https://www.clipsal.com/Trade/search-results?q=4PSO

What is the part code for a clipsal Dinrail Mounted Hot point (Socket)

4SSO15D - Double Pole, 10A Switched Socket, 72mm (4 pole) width
4SSO15D15 - Double Pole, 15A Switched Socket, 72mm (4 pole) width
4PSO10D - 250V 10A 3 Pin Socket Double-pole, 45mm (2.5 Modules) width
4PSO10DL - 3 pin socket outlet double-pole with Round Earth, 45mm (2.5 Modules) width
Page 120 on the clipsal side of the 2014 pocket book

What is the difference between a 4SSO15 and a 4SSO15D?

The 4SSO15 is double pole. Double pole is in reference to switching the neutral as well as the active.

What would be the difference between a 4PSW180 and a MSW180.

The 4PSW180 is listed at 240V and the MSW180 is listed at 250V.
Both are main switches single pole 80 amps

Is there a replacement for a PS110 Protected die-cast switch?

The closest alternative is is RPSW110M.

What is the part number for a din rail mount 1 pole 80amp isolator?

The part number for a din rail mount 1 pole 80amp isolator is - 4PSW180
For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=4PSW180
User-added image

What could be used to mout a 30 series mechanism on a din rail.

The 4PS31 is a designed enclosure which a 30 series mechanism can be placed inside and be din rail mounted.
please see documentation tab on the following link for more information.
https://www.clipsal.com/Trade/search-results?q=4ps31

Is there a 30 Series Enclosure for Din Rails ?

Yes.
The 4PS31

What is the difference between a 4PS31 with double mechanism?

No, unfortunately it is only done in a single mechanism.

Some of the key features are:

  • Enclosure only accepts any 30 series switch mechanisms 2.5 modules wide
  • Din rail mount
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4PS31
 

Video: How to Remove Everlink Terminals from a Tesys D LC1D Contactor

Issue:
Remove Everlink Terminals from LC1D40A-65A 

Product Line: 
Contactors and Starter - IEC

Environment:
Tesys D Everlink  


Resolution:
Make sure your device is not powered during the removal process.

1. Make sure the screws are loose on the everlink terminal side you want to replace
2. Press from the base of the terminal using both thumbs until the everlink terminal slides out