Clipsal Iconic 350W 240V pushbutton timer mechanism, 2 wire with ControlLink

Clipsal Iconic Electronic Time Delay Switch Mechanism, Pushbutton with ControlLink, 2-Wire, 350W

Catalogue Number: 41E350PBT2SM
Clipsal Iconic 350W 240V pushbutton timer mechanism, 2 wire with ControlLink
Colour: Vivid White
Colour: Per UOM Std.
  • Vivid White 1 PCE
Added to cart

Specifications

hide show
Range
Clipsal Iconic
Product or component type
timer
Device presentation
mechanism
Range compatibility
cover plate
Device mounting
flush
Actuator
push-button
Fixing mode
locking bar
Colour tint
vivid white
Surface finish
matt
Type of packing
box
Sale per indivisible quantity
1
Type of operator
momentary
Time delay
  • 30 s
  • 1 min
  • 5 min
  • 15 minutes
  • 30 minutes
  • 1 h
  • 2 h
  • 4 h
    • Remote control type
      push-button
      [Ue] rated operational voltage
      240 V AC 50 Hz
      Load type
    • incandescent lamp 350 W
    • medium voltage halogen lamp 350 W
    • low voltage halogen lamp with iron core transformer 350 W
    • linear fluorescent ballast 250 W
    • compact fluorescent load 250 W
    • dimmable LED lighting driver 350 W
    • LED lighting driver (non-dimmable) 250 W
    • resistive 350 W
      • Power range
        > 10 W
        Derating factor
      • 1 devices(350 W) without
      • 2 devices(250 W) with derating factor
      • 3 devices(220 W) with derating factor
      • 4 devices(175 W) with derating factor
      • 5 devices(120 W) with derating factor
      • 6 devices(100 W) with derating factor
        • Operating distance
          30 m
          Control signal type
          ControlLink
          Connections - terminals
          screw terminals
          Number of terminals
          3
          Wiring configuration
          2-wire
          Screwdriver shape
        • Philips
        • square drive no 1 (SQ1)
          • Local signalling
            LED indicator (warm white)
            Material
          • PC (UL94 V-2): top
          • PC MAS056 (UL94 V-2): bottom
            • Height
              23.5 mm
              Width
              23.5 mm
              Depth
              42 mm
              Embedding depth
              39 mm
              Standards
              AS/NZS 60669.2.1
              Ambient air temperature for storage
              0-60 °C
              Ambient air temperature for operation
              0-45 °C
              Relative humidity
              0-90 %
              Sustainable offer status
              Green Premium product
              REACh Regulation
              Reference contains Substances of Very High Concern above the threshold
              EU RoHS Directive
              Compliant
              Mercury free
              Yes
              RoHS exemption information
              Yes
              China RoHS Regulation
              Product out of China RoHS scope. Substance declaration for your information
              Environmental Disclosure
              ENVPEP1708008EN
              Circularity Profile
              ENVEOLI1708008EN

              Frequently Asked Questions

              hide show

              What is the part number for an electronic time delay switch mech for the iconic range?

              The part  number for an electronic time delay switch mech for the iconic range is - 41E350PBT2SM
              For further information , visit link below;-
              https://www.clipsal.com/Trade/search-results?q=41E350PBT2SM

              What are the part numbers for 2 way switching with pushbutton dimmers for the Iconic range?

              The part numbers for 2 way switching with pushbutton dimmers for the Iconic range are - 41E300PBUD2SM & 41EPBM

              For further information, visit the link below:-
              https://www.clipsal.com/Trade/search-results?q=41E300PBUD2SM
              https://www.clipsal.com/Trade/search-results?q=41EPBM

              User-added image

              Does 41E300PBUD2SM Iconic push button dimmer do ON /OFF + dimming?

              Yes, 41E300PBUD2SM is an integrally switched dimmer, with tactile feel push button.

              Pushbutton Universal Dimmer Operation:
              Short Press : 
              • Press the pushbutton to switch the light On or Off.
              •The dimmer has memory, and will remember the previous dim setting, when you switch the light on. When you press the pushbutton to switch the light Off, the unit will store the current setting in memory.
              Long Press :
              • Press and hold the pushbutton to dim the light up and down. Release to stop dimming.
              • The dimmer will cycle up and down alternately. With a Long Press while the light is On, the dimmer will dim down (decrease brightness) by default. With a Long Press when the light is Off, the dimmer will dim upwards (increase brightness) by default. A subsequent Long Press will dim in the opposite direction.
              • Whilst dimming, if the light reaches its maximum or minimum brightness level, dimming stops at that level.
              • A single ramp cycle takes about 10 seconds to complete (full range, min. to max.).
              • If the pushbutton is not pressed for 15 seconds, the dimmer is set to dim down on the next Long Press.
              Note: If the pushbutton is pressed for longer than 15 seconds, the pushbutton dimmer unit will go into Configuration Mode

              For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=41E300PBUD2SM

              Is there a two way push button dimmer in the Saturn/ ZEN Series?

              There is no direct product that can achieve this, however we can offer a solutioin so this can be achieved. The solution involves a typical multi-way LED Lighting dimming control set up using ZEN Push Button Bell Press and ICONIC 2-Wire Dimmer Push Button. With the iconic dimmer connected with the 60 Series bell press, the bell press will work like ICONIC Controllink and will dim up and down on a long press,
              turn on and of with a short press.
              For further information please view the attached wiring diagram.

              Can part number 41E6PBT3SBM operate as run on timer?

              Yes, part number 41E6PBT3SBM can be used as run on Timer when used in conjunction with 40M.

              Do iconic push button switches 41E350PBES2SM-VW and 41E6PBES3SBM-VW have LED indicators?

              Both push button switch models incorporate LED indicator. By default, the indicator displays at 100 % brightness when the load is switched On, and displays at 10 % brightness when the load is switched Off. The LED indicator configuration can be changed. For further information, please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001765.pdf

              What mechs are needed for 2-way switching in the Iconic range?

              You need a Universal dimmer (41E300PBUD2SM) and a Control Link Mech (41EPBM).

              For more information, please refer to the link:
              https://www.clipsal.com/Trade/Products/ProductDetail?catno=41E300PBUD2SM 
              https://www.clipsal.com/Trade/Products/ProductDetail?catno=41EPBM 


              What is the part number for the time clock mech in the Iconic range?

              There are 2 time clock mechs in the Iconic range, the 10 amp - 41E10PBTC3SBM and the 6 amp 41E6PBTC3SBM.

              For more information, please refer to the link:
              https://www.clipsal.com/Trade/Products/ProductDetail?catno=41E10PBTC3SBM 
              https://www.clipsal.com/Trade/Products/ProductDetail?catno=41E6PBTC3SBM 


              What part numbers are needed to put together an Iconic 1 gang electronic Pushbutton switch plate (Vivid white)?

              Below are the part numbers needed to put together an Iconic 1 gang electronic Pushbutton switch plate :

              3041G - Clipsal Iconic - Switch Grid, Vertical/Horizontal Mount, 1 Gang
              For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=3041G

              +

              3041C-VW -Clipsal Iconic - Skin Switch Plate Cover, Vertical/Horizontal Mount, 1 Gang, Vivid White
              For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=3041C-VW​

              +
              41E350PBES2SM-VW -Clipsal Iconic - Electronic Switch Mechanism, Push Button with ControlLink (without bluetooth) 2-wire, 350W
              For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=41E350PBES2SM