plate only 5gang 115mm sq

Flush Plate, 5 Gang, Large Format

Catalogue Number: 35/2V
plate only 5gang 115mm sq
Colour: White Electric
Colour: Per UOM Std.
  • White Electric 1 PCE
Added to cart

Specifications

hide show
Range of product
Standard Series
Product brand
Clipsal
Number of gangs
5 gangs
Product destination
switch
Fixing mode
by screws
Material
plastic
Marking
without marking
Mounting position
horizontal and vertical
Fixing center
84 x 46 mm
Length
116 mm
Width
116 mm
Depth
11 mm
Sustainable offer status
Green Premium product
EU RoHS Directive
Compliant
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information
Environmental Disclosure
ENVPEP120506EN

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Technical Data Catalogues

Frequently Asked Questions

hide show

What is part number for mounting clip to suit 25/2V?

The part number for mounting clip is a 154/2.

What mounting block suits the 39/2V?

The mounting block that suits the 39/2V is the 448.

Some of the key features are:
  • 8 mounting screw positions
  • Suits all switches and socket outlets with 115 x 115 mm fl ush plates and 84x46 mm mounting centres
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=448


 

Is a wall plate available for part number E35/2?

The part number E35/2 does not have a wall plate it mounts into WB4 wall box.

What is the part number of the mounting block to suit 25/2V Standard range, double socket outlet, large size format 115 x 115mm?

448SD and 448 are the mounting blocks to suit 25/2V, Standard range, double socket outlet, large size format 115 x 115mm.  Dimensions of the mounting block are as follows:

For further information , please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=448SD
https://www.clipsal.com/Trade/Products/ProductDetail?catno=448
448SD
User-added image
448
User-added image
 

Will 25/2V double outlet, large size, vertical fit on 155P2 plaster bracket?

Yes, 25/2V will fit on 155P2. 25/2V is  Large Size Format 115 x 115mm, Double Power Outlet rated to 250V 10A.
For further information please visit:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=25/2V
User-added image

155P2 is a large plaster mounting bracket with 84mm mounting centre. For further information please visit:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=155P2
User-added image
 

What is part number for 35/125 duct?

The part number for 35/125 duct is a - PL35125D

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=PL35125DW

Does Clipsal have a blank plate in the standard series, the same size as a 25/2?

Yes we do, it's the 31/2VX-WE.

What is the part number of the mounting block suitable for 31/2VX large format blank switch plate?

The mounting blocks suitable for 31/2VX are
448 with dimensions of 120mm(Length) 120mm(Width) 28mm(Depth) 84mm x 46mm (mounting centres)
448SD with dimensions of 120mm(Length) 120mm(Width) 14mm(Depth) 84mm x 46mm (mounting centres)
For further information, please visit:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=448
https://www.clipsal.com/Trade/Products/ProductDetail?catno=448SD
448:

448SD:
User-added image
 

What is the part number for a square blank plate?

The part number for the square blank plate is 31/2VX-WE 115MM

For more information please visit https://www.clipsal.com/Trade/Products/flushplate
Or see Trade Product Guide Page # 84 Edition 92

Which wall box suits the large size, twin socket outlet 25/2V?

The wall box that suits the large size, twin socket outlet 25/2V is 257D2-GY.
Its key features are:
  • 2 gang
  • 84 mm x 46 mm mounting center
  • Suits universal wall construction
  • With 20 mm cut-outs one end and 25 mm cut-outs at other, impact resistant, deep-type
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=257D2

Are there double GPO's that are individually wired on each side?

Yes, there are a few GPO's that are individually wired, they are C2016/2, 16/2MF, 2015/2V and 15/2V. In a weather proof option we have the WSC227/1/2

What metal wall box suits the 39/2VA?

The wall box that suits the 39/2VA is 157/2.

Some of the key features are:
  • Sliding nut
  • 84 x 46 mm mounting centre
  • Suits universal wall construction
  • Horizontal and vertical mounting
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=157/2



 

What is part number for mounting block to suit 31/2VX?

The part number for mounting block to suit is a - 448

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=448

User-added image

Is there a double GPO where the outlets are a little further apart?

What is the part number for the bitsa box?

The part number for the bitsa box is 357TB.
Some of the key features are:
  • Tool boxes
  • 12 compartment transparent box with assorted screws, screws and quantities included
  • Includes: 357WF30 (100), 357/20 (150), 357WH12 (350), 357P30 (200), 357P20 (300), 357WH25 (100), 357PH50 (50), 357/63 (50), 357WHP32 (100), 357PH45 (100), 357/35 (100), 357/40 (100)
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=357TB


 

What is the part number of the wallbox to suit 25/2V, 250V AC, 10A large size (115mm x 115mm) double outlet?

Following wallboxes suit 25/2V outlet:
257D2 - Moulded Plastic Wall Box, with 20mm cut-outs one end and 25mm cut-outs at other, impact resistant, deep type.
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=257D2
User-added image
157/2 - 2 Gang Metal Wall Box, with sliding nuts for accurate alignment of accessory, horizontal/vertical mounting, precision stamped from 0.9mm strip bright electro-galvanised.
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=157/2
User-added image
164/2 - 2 Gang Metal Wall Box, single height, with fixed nuts, precision stamped from 0.9mm strip bright electro-galvanised, for poured concrete.
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=164/2
User-added image

Changing the Language of the Symmetra PowerView RM Display


Issue

I need to change the language displayed by my PowerView RM display interface


Product Line

Symmetra Power Array
Symmetra RM
Symmetra LX
Symmetra PX
Smart-UPS VT
Smart-UPS RT 15/20 kVA
PowerView display interface


Environment

All serial ranges


Cause

The display defaults to using the English language.  The user may opt to display the information in a different language.


Resolution

You can change the language by downloading new firmware into the PowerView RM interface. French, German, Italian, and Spanish are available on the enclosed CD. Support for additional languages may be available on the CD or at the APC Web site (https://www.apc.com). Product documentation in these languages also appears on the CD or at the APC Web site.  To change the language of the interface, perform the following steps in the order given.


1. Disconnect the PowerView RM from the UPS.

2. Disconnect the data cable from the RJ-45 port of the PowerView RM.

3. Connect the programming cable (included, APC part number 940-0082) between PowerView RM and the UPS data cable:
a. Attach the RJ-45 connector to the port on the rear of the PowerView RM interface.
b. Connect the female DB-9 connector of the programming cable to a serial port on the computer. The downloading computer must have access either to the file on the CD provided with PowerView RM or to the APC Web site.
c. Attach the UPS data cable to the female RJ-45 connector on the programming cable.

4. Locate the language program file to be downloaded into PowerView RM. Each language program file appears on the CD under the folder of its language(Français, Español, etc.) with a .bin extension. Program files for additional language support or code updates may be available on the APC Web site.

5. Place the PowerView interface in programming mode by pressing simultaneously the three keys on the right (Escape, Help, and Enter) for about three seconds, until the interface emits a long beep. The LCD will display the Programming screen. To leave the Programming screen before starting a file transfer (step 6), press Esc until it beeps (about one second).

6. Start HyperTerminal or another terminal emulation program on the computer. Set the communication parameters to 8 bits, no parity, no flow control, 1 stop bit, and 19,200 bps. After establishing a connection, use the Xmodem protocol to transfer the language program file from the CD or your download folder to PowerView RM. When the file transfer is complete, the PowerView RM interface will reset itself and display the Startup screen in the new language. If the file transfer fails, the interface will reset itself. Retry the file transfer by repeating steps 5 and 6.

7. Quit the terminal session. Disconnect the programming cable and reconnect the UPS data cable to the PowerView RM RJ-45 port.

8. Affix the PowerView RM to the UPS.