Yes, there are a few GPO's that are individually wired, they are C2016/2, 16/2MF, 2015/2V and 15/2V. In a weather proof option we have the WSC227/1/2
The cover for a C2015/20 is a C2015/20C.
Yes it is and the part number is C2015/20-RD.
The part number for Stainless Steel cover to suit is a C2015/20C.
Not available, but Clipsal 2015/15 is available in red but it's horizontal.
The part no is 2015H2. It is 2 x single horizontal switched sockets side by side with a single frame.
The cut out for the C2016/2 is 30mm (H) X 200mm (W).
The dimensions for part number C2016/2 are:
159mm (L) 47mm (H) 28mm (D)
Mounting centres for part number C2016/2 are 122mm.
What Padlock Device can be used on the 9001KR9R E-stop Pushbutton?
NOTE: These attachments will not work when the operator is supplied with a 2 1/4 inch diameter mushroom.
157/1P is a plastic Wall Box that will suit P2025/2.
The measurements for the C2016/2 are 48mm (H) x 160mm (W) x 28mm (D) with a mounting centre of 122mm
Unfortunately, No mounting block available.
EUSERC is an acronym for Electric Utility Service Equipment Requirements Committee. Formed in 1983, the purpose of the organization is to promote uniform electric service requirements among the member utilities, publish existing utility service requirements for electric service equipment and provide direction for development of future metering technology. There are approximately 80 utilities involved in EUSERC from 12 states. Not all EUSERC member utilities accept all metering devices that meet EUSERC specifications. So, although a device may meet EUSERC specifications, it may not be accepted for use by a specific utility company. Always check with the utility company for approval before using any metering device.
Standard 2 gang flush box will suit - part number 157/2
The part number for Brushed Aluminium cover to suit is P2004/2M -BA
The PDL version of the 2015XX is a PDL694XXWH.
Yes there is a P2025/2 with neons. The part number is P2025/2N.
The part number for the plaster bracket to suit the 2000/2 is 2155PRM/2.
There is no mounting block available for the 2025H2
No, the C2000 is 48mm x 160mm x 28mm with 122 mounting centres
Yes, the part number is a 2015D15
The part number for mounting clip is a 154/2.
No, it will trip on a phase unbalance.
CTA-ID : 2005929
C120 torque is 3.5 N-M.
CTA-ID : 2055521
The part number for a surround /cover for the 2025H2 is - 2000H2
The part number for metal wall plate 2000/2 will be 2155PRM2.
Please see page 28 of catalog 6729
dimensions 78mmH X 77mmW
What is the altitude derating for a TeSys D-Line contactor?
Digest 177 Section 18 : Contactors and Starters, IEC
North American Products
The contactors are fully rated up to 3000 meters. Following are derating multipliers for altitudes above 3000 meters for both voltage and current:
3500m x 0.90
4000m x 0.80
4500m x 0.70
5000m x 0.60
3500m x 0.92
4000m x 0.90
4500m x 0.88
5000m x 0.86
For example, an LC1D80 at 5000 meters:
- The maximum rated operational voltage is 1,000V (IEC947-4) and 690V (UL/CSA). At 5000 meters it becomes 1000V x 0.6 = 600V (IEC947-4) and 690V x 0.6 = 414V (UL/CSA).
- The maximum rated operational AC3 current is 80A. At 5000 meters it becomes 80A x 0.86 = 68A.
The part number is 3155H4 at this stage anticipated release is December 2016.
The part number for Iconic cover to suit is 3015/4C.
The wall box for the 2025H2 is the 2157H2
Some of the key features are:
- 2 gang
- 84 mm (2 sets)
- With sliding nuts for accurate alignment of accessory
- Precision stamped from 0.9 mm strip bright electrogalvanised, for 2000H2 series
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2157H2
Why will LA1SK11 adder deck not fit on CA2SK11 relay?
No, LA1SK11 mounts only on the CA2SK20 relay.
CTA-ID : 2014524
What is the part number of a replacement button cap for an XB4BA21?
Use a ZBA2 black cap or otherwise the black cap from a universal ZBA9 kit
CTA-ID : 2015097
What is the part number for a diode for a CA3KN relay?
LA4KC1B or LA4KC1E is the diode and zener diode for the CA3KN relay.
CTA-ID : 2015604
Not available in slimline use C2000 range part code C2016/2