164/6

Modena 8000 WAll Boxes Metal, For Poured Concrete, Single Height, 6 Gang

Catalogue Number: 164/6
164/6
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Range of product
Series 164
Product brand
Clipsal
Shape
rectangular
Number of gangs
6 gangs
Cable entry number
36
Material
steel
Surface treatment
electro-galvanized
Length
280 mm
Width
97 mm
Depth
58 mm
Location of connection
rear
Sustainable offer status
Green Premium product
REACh Regulation
Free of Substances of Very High Concern above the threshold
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure
ENVPEP110719EN

Frequently Asked Questions

hide show

What is the replacement for the Merlin Gerin Current Transformer 16456?

The Part code is METSECT5CC020.
https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=METSECT5CC020

What is the wall box to suit the B8/30/4

 The wall box part number is 164/4

What is the alternate code for a 164/3

There is no plastic box the same size as 164/3, you can use PDL144Mt side by side would do the same

What is the wall box to suit the B4/30/2 ?

 The part number for the wall box is 164/2

What are the dimensions of the 164/5 wall box?

The dimensions of the 164/5 wall box are 234mm wide x 97mm high x 58mm deep.

Some of the key features are:
  • Fixed nut
  • 5 gang
  • Standard size
  • for poured concrete
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=164/5

What is the wall box to suit the B6/30/3 ?

 The part number for the wall box is 164/3

What is the wall box to suit the B10/30/5 ?

 The part number for the wall box 164/5

What are the dimensions of wall box 164/4 and the part number to suit?

The 164/4 which is the wall box to suit part number B8/30/4.

dimensions  188mm x 97mm x 58 mm

What are the dimensions of the wall box to suit the B12/30/6 Multi-Gang Switch?

The wall box to suit the 12/30/6 Multi-Gang Switch is a 164/6.

The dimensions of the wall box is a 164/6 are 278mm(W) X 97mm(H) X 58mm(D).

Some of the key features are:

  • 30 series rocker type
  • B-Style
  • Switch arrangement 6 horizontal and 2 vertical
  • Fascia size: 303 mm Width x 120 mm Height
  • 12 number of switch apertures


For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=B12/30/6

What are the dimensions of wall box to suit 14/30/7

Dimensions of wall box 324mm x 97mm x 58mm Part no 164/7

What is the part number for the wall box for the 14/30/7 and dimensions?

The part number for the wall box for the 14/30/7 and dimensions are - 164/7 & dimensions - W324mm x H97mm x D58mm

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=14/30/7

User-added image

What is the replacement for 16468 CT?

The replacement for 16468 CT is METSECT5MF025
 

What is alternative for Schneider part no 18426

Alternative part no is A9N18426

for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=A9N18426

What is the part code for a 3P B-curve 10Amp MCB

 The part code is 18416

What is the current transformers with accuracy class 0.5rated power: 3 VA?

 The part code is 16455

What is the replacement for 16066 Timer?

The replacement for 16066 Timer is A9E16066.

A9E16066
iRTB relay-delays de-energizing a load upon closing-1C/O - Uc 24-240 VAC/24VDC

For more information see:
https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=A9E16066

What is the din rail mounted timer - wanted to time for 30mins

 The part code is 16066

What is the new version of the Merlin Gerin 16066?

The part number is A9E16066.

What is the alternative for the Merlin Gerin Surge Arrestor 16566?

The Part number is A9L40100
https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=A9L40100
 

What wall clip is used for Prestige large format plates?

The 154/2 is the clip to suit any Prestige large format plate 115mm x 115mm

Part number for a C clip to suit prestige range?

The part name is 154/2

Is there a 154 C-clip that does thicker than 10mm plasterboard/ gyprock?

Yes the 154/1 does plasterboard/gyprock thickness's between 19-25mm.

What is the difference between the Surge Arresters reference 15597 and 16447

The difference between the Surge Arrester references 15597 and 16447 is as follows:

1.) 15597 is a PF20 3Pole Fixed type Type 2 LV Surge Arrester.
2.) 16447 is a PRD20 3Pole Withdrawable type Type 2 LV Surge Arrester. 

Both are suitable to be used in low risk level and for use in TNC Earthing systems.

The difference is that 15597 at its end of life needs to be replaced as it is Fixed type, while 16447 at its end of life can be reused by simply replacing the cartridge as it is Withdrawable type, and the other major advantage is that the wiring does not get disturbed.

What is the part number for the replacment to 16451?

The replacement to the 16451 is new part number - METSECT5CC005
For further information please visit the link:
 https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=METSECT5CC005
 
User-added image

What are the dimensions for part number 162/4?

The dimensions are 186mm (w) x 194mm (h) x 58mm (d)

for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=162/4

User-added image

What is the part number of the wall clip suitable for large format Prestige P2000 plates?

The part number for the wall clip suitable for large format Prestige P2000 plaes is 154/2.

Do you have the a longer version of the standard mounting screws for your power points?

Yes the part number for the longer screws is a 355A. They are 50mm long apposed  to the 355 which is 32mm long. Both screws are M3.5 X 0.8 Pitch.

What is the replacement for the 16066?

The replacement part number for the 16066 is A9E16066
See data sheet for more information....https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=a9e16066
User-added image

Single Phase Symmetra Installation Clearances



Issue

What are the recommended front and rear clearances for the installation of a single phase Symmetra UPS system that is in tower form factor?



Product Line

Symmetra LX
Symmetra Power Array



Environment

All serial ranges



Cause

To ensure proper airflow and access for maintenance, Symmetra LX should be installed with the proper front and rear clearances.  



Resolution

The recommended front clearance is 48" and the recommended rear clearance is 12".  There is no recommendation for side clearance as long as there is access to the front and rear of the system for maintenance.



 

Unexpected Average/Peak Calculations if StruxureWare Central and Monitored NetBotz Clocks Not Synced.

Issue:
Unexpected Average/Peak Calculations if StruxureWare Central and Monitored NetBotz Clocks Not Synced.

Product Line:
StruxureWare Central / StruxureWare Data Center Expert.
NetBotz

Environment:
StruxureWare version 7.x an higher.
NetBotz any version.

Cause:
If the time on your NetBotz appliance(s) is ahead of the time of your Central, the Central will determine that there is no data to calculate the virtual sensor value so the value will report unplugged. An average or sum of 2 sensors in this case may show only 1/2 the actual value assuming one appliance is synced and the other is not.

Resolution:
To avoid such issues, make sure the NetBotz appliance time is synced to the StruxureWare Central time. Please be aware that this is UTC time and is not based on time zone. Using the DCE server as an NTP server (if enabled) can assist in this resolution as well.
 

How to send a Master Reset to an EGX100, EGX300, EGX200 or EGX400.

Issue
Master Reset to an EGX100, EGX300, EGX200 or EGX400 gateways are needed to be done remotely through register write.

Product Line
EGX100
EGX200
EGX300
EGX400

Environment
Master reset using register write

Resolution
A master reset to an Ethernet Gateway (EGX) will reset all settings to the manufactures default settings including the IP address.
For the EGX100 and EGX300, the default IP address is 169.254.0.10. For the EGX200/400 it is 10.10.10.10.

Modbus Tester software or some other Modbus TCP/IP program (like Modscan) can be used to send the master reset register write.

For the EGX100 and EGX300 use address 254 and write decimal 9030 to register 2800.
For the EGX200 and EGX400 use address 254 and write decimal 17476 to register 8000.

Once you have sent this register command to the EGX you will have to cycle power to reboot the processor.


 

Comment peut-on reinitialiser une carte VW3A59310 dont la configuration prealable utilisait le FDR ?

Goals and Symptoms

Comment peut-on réïnitialiser une carte VW3A59310 dont la configuration préalable utilisait le FDR ?

Facts and Changes

La VW3A58310 était utilisée avec la fonction FDR.
On souhaite ensuite l'utiliser sans FDR (conf adresse IP par pocket et ScanI/O pour la commande). On a alors le symptôme suivant :
Affichage : nSt
ETA = 16#0040
Aucune commande n'est prise en compte : après l'envoi de CMD = 16#06 l'ETA est inchangé à 16#0040
Aucune

Causes and Fixes

Lorsqu'une carte Ethernet à été configurée au préalalble avec la fonctionnalité FDR et si elle se trouve reliée à un serveur qui ne possède pas cette fonction, le problème est le suivant :

La carte ( client ) envoit en permanence des requêtes FDR au serveur et reste en attente sans tomber en défaut. Tant qu'il n'y a pas de retour du serveur la carte refuse toute communication.

La solution consiste à dévalider la fonction FDR de la carte via le keypad et de rentrer les paramètres suivants ( menu 8 ) :

P01 : 0
P02 : 1
P03 : 0
P04 : x
P05 : 15

Faire un power off / power on ( un mars et ça repart ).

Error When Installing ION Enterprise 5.6 SP1

Goals and Symptoms

Summary
When running build 552 of ION Enterprise 5.6 Service Pack 1, the installer quits with the following error message:


This message appears when a user is attempting to run the latest version of the 5.6 SP1 installer on a server that is already running ION Enterprise 5.6 SP1 Build 549.

The specific build version may be viewed by selecting Help > About from any ION Enterprise application (e.g. ION Management Console, ION Vista, ION Designer). The about box on a server running ION Enterprise 5.6 SP1 Build 549 will appear as shown below:

Facts and Changes

Keywords
Error -1646 Uninstallation of the patch package is not supported

5.6 SP1 install

Causes and Fixes

Cause
It is not possible to update Service Pack 1 build 549 to Service Pack 1 build 552 by running the build 552 Service Pack 1 installer.

Resolution

Run the ION Enterprise 5.6 SP1 hotfix, which is attached to RESL190756. That hotfix incorporates all of the changes that were introduced between build 549 and build 552.

More Information

To verify that the hotfix has been installed on a server, go to the SetupLogs folder and look for a file named Hotfix_Setup.log. This file is created by the hotfix installer.


Last Revised: January 29, 2008

Public

All content © 1992-2008 Schneider Electric


Legacy KB System (APS) Data: RESL190866 V1.0, Originally authored by DeCr on 01/30/2008, Last Edited by DeCr on 01/30/2008
Related ranges: ION Enterprise V5.6

Is there a C clip for 13mm gyprock as the 154 doesn't fit ?

No, The 154 is designed to suit  up to 12mm and then the 154/1 suits from 19-25mm . If These are not suitable then 155 series may be used