MASTER YOUR CASTLE with your new build or reno project
Enter competition
DETAILS PRIZES T&CS

Building or Renovating?

Master your castle with the ultimate electrical and smart home package, valued at $20,000, for your new build or reno project.

Click on the link below to enter your details for your chance to WIN!

Complete your details

Your Details

Enter the prize draw

Thanks for entering

The lucky winner will be notified by phone and email on 27th November 2019.

Why not spread the word and increase your chances of winning? Each social media share will earn you an extra entry into the draw and bring Clipsal by Schneider Electric another step closer to empowering a community in need.

The competition has now closed.

The winning entry will be drawn Tuesday 27 November 2019 at 2.00pm (AEST).
The winner’s name will be published in The Australian newspaper on Saturday 1st December 2019, but will also be contacted via email and phone on the day of the draw.

We've got the winner!

 

What do you need to 'Master Your Castle'?

Clipsal's Master Your Castle promotion gives you the chance to go into the running to win an ultimate home electrical and smart home package. Whether you are building your dream home or renovating your much loved house, winning this house lot of Clipsal products will help you master your castle.

Default
Receive a Clipspec consultation to design the ultimate customised electrical package, tailor-made for your home.

Walk through your house plans with an expert and select $15,000 worth of Clipsal electrical products. Choose from: LED downlights, exterior wall lights, floodlights, switches, dimmers, power points, bluetooth speakers, motion sensors, smoke alarms, ceiling fans, smart home solutions, or anything else Clipsal has to offer. Then receive $5,000 towards the installation of your selected products.

TERMS AND CONDITIONS

  1. Information on how to enter and the prizes forms part of these Terms and Conditions.

  2. Participation in this promotion is deemed acceptance of these Terms and Conditions.

  3. The Promotional Period commences on Friday 29 March 2019 10.00am (AEST) and closes on Wednesday 20 November 2019 at 9.00pm (AEST).
  4. Entry is open to Australian residents over the age of 18 only.
  5. There is a limit of one entry per person, unless the promoter offers additional entries via a social media promotion, in which case, additional entries will be automatically added on the participants behalf by the promoter.
  6. Employees (and their immediate families) of the Promoter(s) and associated agencies are ineligible to enter. Immediate family means any of the following: spouse, ex-spouse, defacto spouse, child or step-child (whether natural or by adoption), parent, step-parent, grandparent, step-grandparent, uncle, aunt, niece, nephew, brother, sister, step-brother, step-sister or first cousin.
  7. To enter, individuals must, during the Promotional Period:
    1. Visit the ‘Clipsal at Home’ web page, or any of its linked pages and fill in all required fields of the competition form that will appear as a pop up option.
    2. Or sign up at the Clipsal stand at the Sydney HIA Home Show 5-7 th April: ICC Sydney, Darling Harbour.
    3. Or sign up via ROKT lead generation promotion.
    4. Or opt in using the Clipsal Smart Home Selector tool.
  8. There is one major prize to be won, consisting of the winners choice of Clipsal home electrical and smart home products. The major prize has a total value of approximately $20,000, including approx. $15,000 worth of Clipsal home electrical or smart home products and $5,000 towards the cost of installing the products. The $15,000 worth of Clipsal products is chosen by the winner. The winner will be contacted by a Clipsal Consumer Support Agent within two weeks of the prize being drawn to arrange a compulsory consultation with a Clipspec Consultant, at which time a customised prize package (up to the value of $15,000) will be created. The $5,000 towards the cost of installing the products will be awarded to the winner in the form of prepaid VISA gift cards, with the intention that it will be used to pay the electrical contractor conducting the install at the appropriate time.
  9. The winner will be selected via registered electronic draw Approval No: 1224 at Schneider Electric Adelaide Office: 33 – 37 Port Wakefield Road Gepps Cross on Wednesday 27 November 2019 at 2.00pm (AEST).
  10. The winners will be notified by telephone and in writing by a Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  11. The winners name will be published in The Australian newspaper on Saturday 30th November 2019.
  12. By entering the competition and agreeing to these terms and conditions, the winner automatically consents to approval of a case study showcasing the Clipsal solutions selected for installation. This will involve an interview with a Clipsal representative (either in person or via phone) and photographs/videos being taken of their home (at no cost to them). The results of this will be presented in the form of a written story with video imagery to accompany which can be used in any form of media or promotional purposes for an unlimited amount of time (see clause 21).
  13. The Promoter reserves the right, at any time, to verify the validity of entries, registrations and entrants (including an entrant’s identity, age and place of residence) and to disqualify any entrant who submits an entry or registration that is not in accordance with these Terms and Conditions or who tampers with the entry/registration process. Errors and omissions may be accepted at the Promoter's discretion. Failure by the Promoter to enforce any of its rights at any stage does not constitute a waiver of those rights.
  14. Subject to the unclaimed prize draw clause, if for any reason a winner does not take a prize by the time stipulated by the Promoter, then the prize will be forfeited.
  15. If any prize is unavailable, the Promoter, in its discretion, reserves the right to substitute the prize with a prize to the equal value and/or specification, subject to the relevant authorities.
  16. Unclaimed Prize Draw: The winners are given 3 months to claim their prize. Should it necessary a redraw will take place for all unclaimed prizes on Friday 28th February 2020 at Clipsal by Schneider Electric Adelaide Office (33-37 Port Wakefield Road, Gepps Cross, SA 5094) at 2.00pm (AEST). The winner will be notified by telephone and in writing by a Schneider Electric or Clipsal by Schneider Electric Representative. The Promoter’s decision is final in relation to all aspects of this promotion and no correspondence will be entered into.
  17. The redrawn winners name will be published in The Australian newspaper on Friday 6th March 2020.
  18. The Prize is not transferable or exchangeable and cannot be taken as cash.
  19. If a Prize is not available for any reason, the Promoter may substitute an alternative prize to at least the value and of a similar standard as the Prize that is not available.
  20. The promoter makes no representation or warranty about the fitness for purpose or merchantable quality of the Prize.
  21. Entrants consent to the Promoter using their name and/or image in the event they are a winner in any media for an unlimited period without remuneration for its promotional and publicity purposes.
  22. The Promoter may, subject to any written directions from a regulatory authority, modify, suspend, terminate or cancel the promotion, as appropriate.
  23. The Promoter collects personal information in order to conduct the promotion and may, for this purpose, disclose such information to third parties, including but not limited to agents, contractors, service providers, prize suppliers and, as required, to Australian regulatory authorities. Entry is conditional on providing this information. The Promoter may, for an indefinite period, unless otherwise advised, use the information for promotional, marketing, publicity, research and profiling purposes, including sending electronic messages or telephoning the Eligible Entrant. Eligible Entrants should direct any request to opt out, access, update or correct information to the Promoter. All entries become the property of the Promoter.
  24. The Promoter’s and judges’ decision is final and no correspondence will be entered into.
  25. If this promotion is interfered with in any way or is not capable of being conducted as reasonably anticipated due to any reason beyond the reasonable control of the Promoter, including but not limited to technical difficulties, unauthorised intervention or fraud, the Promoter reserves the right, in its sole discretion, to the fullest extent permitted by law (a) to disqualify any entrant; or (b) subject to any written directions from a regulatory authority, to modify, suspend, terminate or cancel the promotion, as appropriate.
  26. Nothing in these Terms and Conditions limits, excludes or modifies or purports to limit, exclude or modify the statutory consumer guarantees as provided under the Competition and Consumer Act, as well as any other implied warranties under similar consumer protection laws in the State and Territories of Australia (Non-Excludable Guarantees). Except for any liability that cannot by law be excluded, including the Non-Excludable Guarantees, the Promoter (including its respective officers, employees and agents) is not responsible for and excludes all liability for any personal injury or any loss or damage whether direct, indirect, special or consequential arising in any way out of the promotion or use of a Prize.
  27. The Promoter is Schneider Electric (Australia) Pty Ltd (ABN 42 004 969 304) of 78 Waterloo Rd, Macquarie Park, NSW 2113.
box wall deep 1g wide s/nut

164

Mounting Accessories WAll Boxes Metal, Poured Concrete, 1 Gang, Deep Wide

box wall deep 1g wide s/nut
Colour:
Colour: Per UOM Std.
  • 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
  • Standard
  • Sliding nut
  • 1 gang
  • Suits universal wall construction
  • 84 mm mounting centret
  • Deep wide type
  • Knockouts: 1 x 25 2 x 20 Back, 1 x 20 1 x Type 1 Top, 1 x 25 1 x Type 1 Bottom, 1 x 25 2 x 20 1 x Type 1 LH Side, 1 x 25 2 x 20 1 x Type 1 RH Side
Range of product
Series 164
Product brand
Clipsal
Shape
rectangular
Number of gangs
1 gang
Cable entry number
14
Material
steel
Surface treatment
electro-galvanized
Length
97 mm
Width
56 mm
Depth
58 mm
Location of connection
rear
Sustainable offer status
Green Premium product
REACh Regulation
Reference contains Substances of Very High Concern above the threshold
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure
ENVPEP110719EN
Circularity Profile
N/A

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

  • Product Environmental

  • Installation Instruction

  • Specifications

  • Certificates (MSDS)

Frequently Asked Questions

hide show

What is the maximum motor cable length for an ATV312?

Issue:
What is the maximum cable distance from an ATV312 drive to the motor?

Product line:
ATV312, Altivar 312, ATV320, Altivar 320

Environment:
All models

Cause:
n/a

Resolution:
The ATV312 shows that an output filter or choke is required for any cable distance between the drive and motor exceeding 164 feet (50 meters).  Above 164 feet, there is a change with shielded vs non-shielded.

Shielded cables
From 164 feet to 330 feet (100 meters) you can use the LR filter cell or a motor choke.

Unshielded cables
From 164 feet to 660 feet (200 meters) you can use the LR filter cell or a motor choke.
 

What are the minimum and maximum cable specifications for Remote I/O ( RIO )?

Maximum drop length is 164 feet.
Minimum drop length is 8.5 feet.
Maximum trunk length is 8400 feet using RG11 and 4600 feet using RG6.
Maximum overall attenuation for the network is 35 db.
Minimum distance between taps is 8.5 feet.
Minimum distance between the RIO head and the self terminating "F" adapter is 18 inches.
Minimum distance between the self terminating "F" adapter and splitter 8.5 feet.


What is the maximum motor lead length you can run the ATV320 drive without a load reactor?

Issue:
What is the max cable length you can run the ATV320 drive without a load reactor?

Product Line:
Altivar 320

Environment:
All

Cause:
Motor cable length distance without a load reactor. 

Resolution:
The ATV320 drive can run up to 164 feet without load reactor.  
You can go up to 328 feet with shielded cable or up to 656 feet with an unshielded cable.
See the table in the attachment.

Addressing and length of the cam table in CSY84 and 164

Goals and Symptoms

Additionals informations for the management and the addressing of the profils cams tables in CSY84 and 164.

Causes and Fixes

Informations on the parameters of the adjust mode for a cam profil or corresponding parameters of the TRF_RECIPE for cam profil.

· Address table: (%MW or %KW)
Designate the first address of the cam table. Must be always an even value.

· Length for a transfer M+S (Master and Slave):
The tables M and S must be adjacents. The M table must be always before the S table and it's advised to manipulate the whole tables M and S. Avoid to manipulate for example the master table and a part of the slave table.

For a M+S transfert the value to put in the parameter length :
If N pts = the dots curve number put in the configuration
=> Length = N x 4


Nota:
The last occupied address is:
Address table + Length - 2
The first next available address is:
Address table + Length

Example:
Address table = %MW2000
Length = 19996
2000+19996-2=21994
So:
The master and then slave tables begin at %MF2000 and finish at %MF21994.
Next available even address = %MW21996.


· Length for a transfer M or E
The M and S tables are not obligatorily contiguous. It isn't mandatory to have the master table before the slave one.
It is possible to handle all or a part of the table. But always start from the first address ( of the master or slave table ).


If N dts = the dots number of the curve declared in configuration
=> Length = N x 2
With 2 <length< ( N x 2 )
Example:
If 4999dts we can read or write from 1 to 4999dts => 2 <Length< 9998

Nota:
The last occupied address is:
Address table + Length - 2
The first next available address is:
Address table + Length

Example:
Address table = %MW0
Length = 9998
0+9998-2=9996
So:
The master or slave table begin at %MF0 and finish at %MF9996.
Next available even address = %MW9998


Legacy KB System (APS) Data: RESL179776 V1.0, Originally authored by JeCa on 09/18/2006, Last Edited by JeCa on 09/18/2006
Related ranges: Modicon Premium