Single Switch Socket Outlet, 250V, 15A, Skirt Mount

Single Switch Socket Outlet, 250V, 15A, Skirt Mount

Single Switch Socket Outlet, 250V, 15A, Skirt Mount

Item Number: 16/15-WE

Retail
$76.04
RRP (Inc. GST)
Colour White Electric (WE)
  • White Electric 1 PCE
  • Black 1 PCE

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Range of product

Standard Series

Surface finish

glossy

Sustainable offer status

Green Premium product

Physical

Control type

ON/OFF button

Number of gangs

1 gang

Pin number

3

Number of power socket outlets

1

Actuator

  • rocker
  • switch
    • Mounting position

      horizontal

      Fixing mode

      by screws

      Local signalling

      without light indicator

      [Ue] rated operational voltage

      250 V AC

      [In] rated current

      15 A

      Depth

      14 mm

      Length

      98 mm

      Width

      45 mm

      Fixing center

      78 mm

      Standards

    • AS/NZS 3100
    • AS/NZS 3112
    • AS/NZS 3133:approval number S/1
      • EU RoHS Directive

        Compliant

        Mercury free

        Yes

        RoHS exemption information

        Yes

        China RoHS Regulation

        Product out of China RoHS scope. Substance declaration for your information

        Environmental Disclosure

        ENVPEP120506EN

        Material

        Material

        plastic

        Others

        Unit Type of Package 1

        PCE

        Number of Units in Package 1

        1

        Package 1 Weight

        62 g

        Package 1 Height

        30 mm

        Package 1 width

        50 mm

        Package 1 Length

        100 mm

        Unit Type of Package 2

        BB1

        Number of Units in Package 2

        5

        Package 2 Weight

        0.346 kg

        Package 2 Height

        76 mm

        Package 2 width

        96 mm

        Package 2 Length

        120 mm

        Unit Type of Package 3

        CAR

        Number of Units in Package 3

        100

        Package 3 Weight

        13.1 kg

        Package 3 Height

        250 mm

        Package 3 width

        214 mm

        Package 3 Length

        338 mm
        Show all specifications

        Documents & downloads

        hide show
        Filter items
        • All

        • Product Brochures

        • Technical Data Catalogues

        • Specifications

        Frequently Asked Questions

        hide show

        What is the part code for the replacement rubber seal for PDL 14/15 Tuff light

        The part code is PDL20/8

        Is there a skirting mount double power outlet rated to 15A, 250V?

        Unfortunately not, we do not have skirting mount double power outlet rated to 250V 15A .

        In 15A , 250V, skirting mount, we have the following options:

        16/15 -  Single Power Outlet 250V 15A, Skirting Mount, Plate size 98 x 41mm at centre.
        For further information, please visit
        https://www.clipsal.com/Trade/Products/ProductDetail?catno=16/15

        16/2MF1510 - Double Power Outlet 250V 15A and 10A combination, Skirting Mount, suits ducting (156.5 x 44mm).
        For further information, please visit
        https://www.clipsal.com/Trade/Products/ProductDetail?catno=16/2MF1510

         

        Is a blanking plate available for 16/2?

        No. Unfortunately,there is no blank plate available for 16/2.

        What is the current transformers with accuracy class 0.5rated power: 3 VA?

         The part code is 16455

        What is the part code for a 1P 32A relay

         The part code is 15515

        Is there a mounting block for the 16/2?

        No, there is not.

        How to perform MSET on a BPH motor using Lexium 17/15 Servo Drive?



        Issue:  Although the BPH motors that are used with the Lexium 17 and 15 range of Servo drives are factory MSET, occasionally there may be a need to MSET this in the field due to commutation error being reported. 


        Product Line: Lexium BPH


        Environment:


        Cause: Due to an incorrect offset value set in the drive, the drive may report a F25, commutation error.


        Resolution: This resolution discusses the MSET procedure for a BPH motor with a Lexium 17/15 series drive.

         
        Proper commutation and position feedback are required to interface a particular servo drive and motor combination. When using Schneider Electric BPH motors and Lexium drives, this setup (or “characterization”) process has been completed and verified for the user at the factory. Occasionally there may be a need to MSET the BPH motor and this is detailed in this procedure.
         
        Perform the following steps, as described, and in the order presented, to complete the MSET procedure. 
         
        1.    Disconnect the Motor from the Mechanical Load
        2.    Electrical Connections
        A.   Verify that the required electrical connections for drive power, logic power, motor power and resolver are as described in the Lexium drive user manual.
        B.   Apply 24VDC logic and AC input power to confirm proper drive startup sequence and self-checks.
         
         Follow this MSET procedure only if the drive firmware is ver 5.51 and above.
         
         Connect to the drive using Hyperterm…
         
        1. Type OPMODE followed by Enter – note down the Opmode (xx) the drive is set to.
         
        1. Type OPMODE 2 followed by Enter – switch to digital torque mode
             C.     Type 'EN' followed by Enter.

             D.     Type "Zero" followed by ENTER - Motor shaft will jump to nearest pole. MPHASE value is automatically set.
         
          
        1. Type SAVE
         
        1. Type OPMODE xx followed by enter ( where xx is the default value that was originally set for the application.)
         
             G.    Type COLDSTART (the drive will reboot)
        This completes the MSET procedure.

        What would be the part number for an Earth Clip, 16/20 mm.

        203M.
        Pressed Metal Conduit Fittings, Earth Clips, Water pipe adjustable earth clip 15 - 20mm or 1/2 - 3/4 inch.
        Please see following link under the documentation tab for full catalogue.
        https://www.clipsal.com/Trade/Products/ProductDetail?catno=203M

        What are the dimensions of the 164/5 wall box?

        The dimensions of the 164/5 wall box are 234mm wide x 97mm high x 58mm deep.

        Some of the key features are:
        • Fixed nut
        • 5 gang
        • Standard size
        • for poured concrete
        For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=164/5

        What is the wall box to suit the B10/30/5 ?

         The part number for the wall box 164/5

        What is the new code for the Merlin Gerin 16065 Time Delay Module ?

        Code =  A9E16065

        What is the replacement for 16065?

         Replacement for 16065 is A9E16065.
        Show More