Frequently Asked Questions
Yes, the extra switch in the 15X is removable. Any 230v rated 30 series mec will fit in it's place.
On the XVP range of illuminated beacons and tower lights, it is technically possible to mix lighting units using incandescent lamps and lighting units using LED lamps.
Such mixing is not recommended because the electronic components in the LED lamps may be heated by the incandescent lamps.
If this solution is chosen, it is vital to use incandescent and LED lamps that fit onto a BA 15d base fitting.
Difference between the XVAC211 and the XVAC21
They are the same cover and base units, but the XVAC21 does not include a gasket .
Harmong Tower Lights and Beacons
XVB 70mm Diameter (2.75 inches)
The XVBC9B terminals are not polarity sensitive.
On the XVB indicating bank, how can a custom length of support be ordered?
Push Buttons and Operator Interface
22 mm Push Buttons
Use the conduit adapter part number XVBC00 and the desired length of .5`` (1/2) conduit.
XVP wiring installation
Tower Lights and Beacons
50mm Diameter Harmony® XVP
The terminals are numbered 1 through 5 to correspond to the units in succession up the stack. So the first unit is #1, second unit is #2.
See the attached instructions, page 14.