bend solid galv cond 25mm

Series 1247 Machine Cast Fittings, Solid BEnds, 25Mm Galvanised Cast Iron

Catalogue Number: 1247/25
bend solid galv cond 25mm
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
Range of product
Series 247
Material
cast iron
Surface treatment
galvanised
Diameter
25 mm
Connector type
thread connector
Operating angle
90 °
Length
101 mm
Inner radius
50 mm
Standards
  • AS 2052
  • AS 1721
    • REACh Regulation
      Free of Substances of Very High Concern above the threshold
      REACh free of SVHC
      Yes
      EU RoHS Directive
      Pro-active compliance (Product out of EU RoHS legal scope)
      Toxic heavy metal free
      Yes
      Mercury free
      Yes
      RoHS exemption information
      Yes
      China RoHS Regulation
       Pro-active China RoHS declaration (out of China RoHS legal scope)

      Frequently Asked Questions

      hide show

      Whati s pitch thread for part number 1245/25?

      Pitch thread is 1.5mm

      Does the 1240/25 series come with gaskets?

      No, they are light duty. Buy the 1240HL25 to obtain a heavy duty lid and gasket , or if gasket is required for retro fit then buy 1240GT
      For more information on this product range please visit the Clipsal web site on the link provided
      https://www.clipsal.com/Trade/search-results?q=1240

      What is the thread type on a 1235/25?

      The thread type on a 1235/25 is BS - British Standard.

      For more information, please refer to the link:
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=1235/25 

      Is there 125x125 mini trunking available.

      no, biggest mini trunking size available is 150x75

      What is the part number for a plug to suit the 240/25?

      The part number for a plug to suit the 240/25/3 is a 220/25.
       

      What is part number for lid to suit 1239/20/4?

      Part number 1239L20 will suit any of 1239/20 series.

      Is there an extension ring to suit the 343?

      Yes, there is the 93ER and also the 249/12 or 249/25.

      SRT 8 or 10kVA reports Error P.11 or DC Bus Soft Start or event codes 124/125

      Issue: The UPS reports P.11 or DC Bus Soft Start - event 124/125



      Product Line: SRT 8-10kVA Models 

      Resolution:
      Clear the Alarm. Turn the output ON again. If the problem persists, Brain dead the UPS. If the alarm reoccurs, perform a UPS Firmware upgrade to the latest 04.7 revision that addressed these issues. For complete upgrade instructions please refer to FA164737.
       
      Release Notes (UPS 04.7):
      ========================
      1. Improved system performance of transitions between Online and Bypass operation modes.
      2. Improved system behaviour for three phase input configurations to reduce transitions to battery under certain input feed conditions.
      3. Improved system behaviour to eliminate false detection of DC bus under voltage alarm under certain conditions.
      4. Improved system handling for certain AC input conditions during system start-up.

      Could not remove directory \usr\Cfg message when upgrading M241/251 firmware

      • When upgrading using Controller Assistant and USB cable, error message "Could not remove directory \usr\Cfg" is displayed.
      • When upgrading using SD card "Delete "/usr/*" (line 1) returned cleaning error" appears in SCRIPT.log file.

      This is because some corrupted files can not be deleted.
      To delete these files " Format "/usr" " should be added to SD card script.

      In firmwares starting from v4.0.2.52 " Format "/usr" " is added automatically by Controller Assistant when generating SD cards.
       

      What is the dimension of 1260025 TMX-4E hollow wall anchor cavity fixing with screw?

      The dimension of 1260025 TMX-4E is 14mm (diameter) x 47mm (length). 1260025 is cavity fixing including fully threaded screw with combi-head and Phillips cross-slot.
      Benefits
      • Captive fixing – stays fixed even when the screw is not tightened
      • Anti-rotation design
      • Pre-assembled screw
      • High load values
      • Fire-resistant
      • Ideal for overhead cavity fixing
      Material and Operative Data:
      Material cavity fixing Expanding part: electroplated sheet metal
      Screw: electroplated steel
      Material mounting tool: Steel and plastic
      Temperature range:  –40°C to 80°C
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=1260025
      User-added image

      Unity help incorrectly states that the outputs on the BMXDDI1602 are isolated.

      Goals and Symptoms
      Unity help incorrectly states that the outputs on the BMXDDI1602 are isolated.

      Facts and Change
      BMXDDI1602

      Causes and Fixes
      • Unity help incorrectly shows that the outputs on the BMXDDI1602 are isolated. 



       
      • The wiring diagram from the user manual correctly shows the outputs as not being isolated. 


       

      How to calculate Energy readings from the raw Integer register data on an Energy Meter

      Issue
      The energy values are stored across two 16-bit integer registers on an energy meter. 

      Product Line
      Energy Meter

      Environment
      Reading and converting Modbus register values

      Resolution
      The Energy Meter stores energy across two 16-bit integer registers.

      Register #1 and Register #2 (Modbus address 257/258 for Register #1 and 259/260 for Register #2). Register #2 is the High WORD and Register #1 is the Low WORD. 

      The Multiplier/Divisor table states that both of these registers must be divided by 32 to obtain the real value from the raw data.
      The Multiplier/Divisor should NOT be applied to both registers. It is applied to the final value of both registers.

      To calculate the Energy the registers must first be arranged as the register list states [2] is the High word and [1] is the Low word.

      To make [2] the High word it needs to be shifted to the left 16 bits.
      To accomplish this multiply the value in [2] by 65,356.
      You will then add this value to the value in [1].
      The final value will be divided or multiplied by the correct scaling value. Please see the example listed below.

      For this example we will assume an Energy Meter with 300 amp CTs. According to the Integer Multiplier/ Divisor table, 300 amp CTs will give a divisor value, (d), of 32 and a multiplier value, (m), of 0.03125.
      We will assume the following register values.
      Register #1 = 29,586
      Register #2 = 31

      Using Divisor Table
      kWh = ([R2]*65,536+[R1])/d
      kWh = (31*65,536+29,586) / 32
      kWh = 64412.56

      Using Multiplier Table
      kWh = ([R2]*65,536+[R1]) * m
      kWh = (31*65,536+29,586) * 0.03125
      kWh = 64412.56

      *Note the divisor will not always be 32 and the multiplier will not always be 0.03125. For the correct values please see the Integer Multiplier Table.
       

      What is the dimension of 1264/2M, 25mm (male) to 20mm (female) brass reducer?

      Dimensions of 1264/2M are as follows:
      A = 25mm
      B = 21mm
      C = 16mm


      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=1264/2M