Quantcast

Surface Switch, 1 Gang, 1 Pole, 250VAC, 16A, WS Series, M80 - Square

Resistant Grey | Surface Switch, 1 Gang, 1 Pole, 250VAC, 16A, WS Series, M80 - Square

Surface Switch, 1 Gang, 1 Pole, 250VAC, 16A, WS Series, M80 - Square

Item Number: WS226-RG

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

  • Weathershield
  • Series WS

Product brand

Clipsal

Surface finish

brilliant

Sustainable offer status

Green Premium product

Physical

Control type

sliding type

Fixing mode

by screws

Device mounting

surface

Standards

  • AS/NZS 3133
  • AS 60529
  • IEC 60669-1

REACh Regulation

Free of Substances of Very High Concern above the threshold

REACh free of SVHC

Yes

EU RoHS Directive

Compliant

Toxic heavy metal free

Yes

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

 Pro-active China RoHS declaration (out of China RoHS legal scope)

Environmental Disclosure

ENVPEP130201EN

Others

Package 1 Bare Product Quantity

1

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

6.7 cm

Package 1 Width

9.2 cm

Package 1 Length

9.0 cm

Package 1 Weight

184.0 g
Show all specifications

Frequently Asked Questions

hide show

Why does my Weather protected Sunset Switch not turn on when power is first applied?

Unlike other sensors during the ‘warm up’ period when power is applied for the first time, or re-applied after a power failure, the Sunset Switch will remain idle for this short period. The load will not be turned on during this period even if the ambient light level is below the switching threshold.
Two Wire designs typically have 3.5 minutes (approx) and Three Wire Designs typically have 90 seconds (approx) for the Warm-up time.
 

What is the temperature range of the WS226?

The operating temperature of the Weathershield products is -25ºC to +75ºC.
For temperatures outside of these limits, and for information on the heat generated by the electrical components, please contact your Clipsal representative.
image.png
Please go to the following links below and check under the Documentation Tab for more information.

Australia - https://www.clipsal.com/products/detail?CatNo=WS226&itemno=WS226-RG&backto=/search?q=WS226&tab-document-1=0
New Zealand - https://www.pdl.co.nz/products/detail?CatNo=WS226&itemno=WS226-RG&backto=/search?q=WS226
 

What IP rating is the WS226

It is rated IP66

image.png
Please go to the following links below and check under the Documentation Tab for more information.

Australia - https://www.clipsal.com/products/detail?CatNo=WS226&itemno=WS226-RG&backto=/search?q=WS226&tab-document-1=0
New Zealand - https://www.pdl.co.nz/products/detail?CatNo=WS226&itemno=WS226-RG&backto=/search?q=WS226&tab-document-1=0

Are the buttons on the WS226/2PB momentary or latching?

The buttons on the WS226/2PB are latching only, not momentary.

image.png

Please go to the website via the following links below and check under the Documentation Tab for more information.

Australia - https://www.clipsal.com/products/detail?CatNo=WS226/2PB&itemno=WS226/2PB-RG&backto=/search?q=WS226/2PB&tab-document-1=0
New Zealand - https://www.pdl.co.nz/products/detail?CatNo=WS226/2PB&itemno=WS226/2PB-RG&backto=/search?q=WS226/2PB&tab-document-1=0

What is the dimensions of a WS226 series product?

The dimensions of the WS226 range is 85mm x 85mm x 64mm Deep.


Please go to the website via the following links below and check under the Documentation Tab for more information.

Australia - https://updates.clipsal.com/ClipsalOnline/Files/Brochures/I0000131.pdf
New Zealand - https://www.pdl.co.nz/products/detail?CatNo=WS226