Package 1 Bare Product Quantity
1
Relay type
motor temperature control relay
Product specific application
for 3-phase supply
Relay monitored parameters
- phase failure detection
- phase sequence
- test/reset button
- motor temperature via PTC probe
- selection (with or without memory)
Time delay type
fixed 0.3 s
Switching capacity in VA
1250 VA
Measurement range
- 208...480 V voltage AC
- 0...20 Ohm short-circuit detection
Contacts type and composition
2 NO
[Uc] control circuit voltage
24...240 V
Reset time
10000 ms output
Maximum switching voltage
Minimum switching current
10 mA at 5 V DC
Maximum switching current
Supply voltage limits
- 20.4...264 V AC
- 20.4...264 V DC
Power consumption in VA
0...4 VA at 24...240 V AC
Maximum power consumption in W
0.5 W DC
Control circuit frequency
50...60 Hz +/- 10 %
Resistance across terminals
602 mOhm
Nominal output current
5 A
Measurement voltage limits
176...528 V AC
Run-up delay at power-up
500 ms
Voltage range
176...528 V
Response time
> 50 ms (input Y1 (contact Y1-T1) and push-button)
[Uc] control circuit voltage
<= 3.6="" v="" of="" temperature="" control="" circuit="" (t1-t2="" terminals="">
Short-circuit current
0.007 A temperature sensing circuit (T1-T2 terminals short circuited)
Maximum resistance
1500 Ohm for temperature sensor at 20 °C
Tripping threshold
3100 Ohm +/- 10 % for temperature control circuit
Reset threshold
1650 Ohm +/- 10 % for temperature control circuit
Overvoltage category
III conforming to IEC 60664-1
[Ui] rated insulation voltage
400 V conforming to IEC 60664-1
Supply frequency
50/60 Hz +/- 10 %
Operating position
any position without derating
Tightening torque
0.6...1 N.m conforming to IEC 60947...1
Housing material
self-extinguishing plastic
Operating rate
<= 360="" operations/hour="" full="">
Utilisation category
- AC-12 conforming to IEC 60947-5-1
- AC-13 conforming to IEC 60947-5-1
- AC-14 conforming to IEC 60947-5-1
- AC-15 conforming to IEC 60947-5-1
- DC-12 conforming to IEC 60947-5-1
- DC-13 conforming to IEC 60947-5-1
Immunity to microbreaks
20 ms at 20.4 V
Electromagnetic compatibility
- emission standard for industrial environments conforming to EN/IEC 61000-6-4
- emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3
- immunity for industrial environments conforming to EN/IEC 61000-6-2
Directives
- 73/23/EEC - low voltage directive
- 89/336/EEC - electromagnetic compatibility
Vibration resistance
- 0.35 mm (f= 5-57.6 Hz) conforming to IEC 60068-2-6
- 1 gn (f= 57.6-150 Hz) conforming to IEC 60255-21-1
Shock resistance
15 gn for 11 ms conforming to IEC 60255-21-1
Pollution degree
3 conforming to IEC 60664-1
Dielectric test voltage
2 kV, 1 min AC 50 Hz
Non-dissipating shock wave
4 kV
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Unit Type of Package 2
S03
Number of Units in Package 2
48
Package 2 Weight
6.969 kg
