Quantcast

Speed Control Relay 24-240V Ac/Dc

Speed Control Relay 24-240V Ac/Dc

Speed Control Relay 24-240V Ac/Dc

Item Number: RM35S0MW

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

Harmony Control Relays

Product or component type

speed control relay

Sustainable offer status

Green Premium product

Warranty

18 months

Physical

Connections - terminals

screw connectors

[In] rated current

5 A

Width

35 mm

Marking

  • CE : EMC 89/336/EEC
  • CE : 73/23/EEC

Insulation resistance

  • > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5
  • > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1
  • > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5
  • > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1
  • > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5
  • > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1

Connections - terminals

  • screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
  • screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
  • screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
  • screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end

Mounting support

35 mm symmetrical DIN rail conforming to EN/IEC 60715

Electrical durability

100000 cycles

Mechanical durability

30000000 cycles

Standards

  • NF EN 60255-6
  • IEC 60255-6

Product certifications

  • C-Tick
  • GOST
  • UL
  • GL
  • CSA

Ambient air temperature for storage

-40...70 °C

Ambient air temperature for operation

-20...50 °C

Relative humidity

95 % at 55 °C conforming to IEC 60068...2-30

IP degree of protection

  • IP20 (terminals) conforming to IEC 60529
  • IP30 (casing) conforming to IEC 60529

REACh Regulation

Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

X

Environmental Disclosure

ENVPEP1504008EN

Circularity Profile

ENVEOLI1504008EN

California proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Material

Contacts material

cadmium free

Others

Relay type

speed control relays

Relay name

RM35S

Relay monitored parameters

  • overspeed
  • underspeed

Time delay range

0.6...60 s adjustable on energisation delay (tolerance: 0...10 % of the full scale value)

Switching capacity in VA

1250 VA

Minimum switching current

10 mA at 5 V DC

[Us] rated supply voltage

24...240 V AC/DC

Maximum power consumption in VA

5 VA AC

Measurement range

  • 0.05...0.5 s
  • 0.5...5 min
  • 1...10 min
  • 1...10 s
  • 0.5...5 s
  • 0.1...1 s
  • 0.1...1 min

Utilisation category

  • AC-12 conforming to IEC 60947-5-1
  • AC-13 conforming to IEC 60947-5-1
  • AC-14 conforming to IEC 60947-5-1
  • AC-15 conforming to IEC 60947-5-1
  • DC-12 conforming to IEC 60947-5-1
  • DC-13 conforming to IEC 60947-5-1
  • DC-14 conforming to IEC 60947-5-1

[Uc] control circuit voltage

24...240 V

Contacts type and composition

1 C/O

Reset time

  • 50 ms contact S2 in memory mode on time delay
  • 1 s supply Un in memory mode on time delay

Maximum switching voltage

250 V AC/DC

Supply voltage limits

20.4...264 V AC/DC

Maximum power consumption in W

3 W DC

Output contacts

1 C/O

Nominal output current

5 A

Run-up delay at power-up

0.05 s

Hysteresis

5 % of threshold

Measurement accuracy

+/- 10 % of the full scale value

Repeat accuracy

  • +/- 0.5 % for input and measurement circuit
  • +/- 0.5 % for time delay

Measurement error

  • +/- 0.1 %/°C with temperature variation
  • < +/-="" 1="" %="" over="" the="" whole="" range="" with="" voltage="">

Input frequency

0.0017...20 Hz

Response time

15 ms max (on crossing the threshold)

Polarity

reversible polarity on DC supply

Threshold setting

10...100 %

[Us] rated supply voltage

11.5...12.5 V

Maximum supply current for sensors

  • 40 mA for < 24="" v="" ac="" at="" 25="">
  • 40 mA for < 24="" v="" dc="" at="" 25="">
  • 50 mA for 24...240 V AC
  • 50 mA for 24...240 V DC

Impulse duration

  • >= 5 ms high state
  • >= 5 ms low state

Input compatibility

  • 3-wire sensor (E1) PNP or NPN, 12 V, 50 mA
  • NAMUR sensor (E2), 12 V, 1.5 kOhm
  • voltage input (E1), 0...30 V, 9.5 kOhm, high state >= 4.5 V low state <= 1="">
  • volt-free contact input (E1), 12 V, 9.5 kOhm

Overvoltage category

III conforming to IEC 60664-1

[Ui] rated insulation voltage

250 V conforming to IEC 60664-1

Control circuit voltage limits

- 15 % + 10 % Un

Supply frequency

50/60 Hz +/- 10 %

Operating position

any position without derating

Tightening torque

0.6...1 N.m conforming to IEC 60947...1

Housing material

self-extinguishing plastic

Status LED

  • 1 LED green for power ON
  • 1 LED yellow for inhibit
  • 1 LED yellow for relay (R)

Operating rate

<= 360="" operations/hour="" full="">

Compatibility code

RM3

Immunity to microbreaks

50 ms

Electromagnetic compatibility

  • emission standard for industrial environments conforming to EN/IEC 61000-6-4
  • emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3
  • immunity for industrial environments conforming to NF EN/IEC 61000-6-2

Vibration resistance

  • 0.35 mm (f= 5-57.6 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1
  • 1 gn (f= 57.6-150 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1

Shock resistance

15 gn for 11 ms conforming to IEC 60255-21-1

Pollution degree

3 conforming to IEC 60664-1

Dielectric test voltage

2 kV AC 50 Hz

Non-dissipating shock wave

4 kV

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

130.0 g

Package 1 Height

4.4 cm

Package 1 width

7.4 cm

Package 1 Length

9.4 cm

Unit Type of Package 2

S03

Number of Units in Package 2

48

Package 2 Weight

7.181 kg

Package 2 Height

30.0 cm

Package 2 width

30.0 cm

Package 2 Length

40.0 cm

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • CAD Files and Packs

  • Technical Data Catalogues

  • Installation Instruction

  • Product Environmental

  • End of Life Manual

  • Technical illustration

  • Application Solutions

  • eTechPub

  • Certificates (MSDS)