Spare Coils



Qty UoM EAN Colour



Range of product

TeSys D



Product or component type

contactor coil

Product compatibility

  • LC1D150
  • LC1D115
    • Warranty

      18 months


      Mechanical durability

      8 Mcycles

      Ambient air temperature for operation

      -5-60 °C

      Net weight

      0.3 kg


      Device short name


      Control circuit type

      DC standard

      [Uc] control circuit voltage

      24 V DC

      Average resistance

      147 Ohm at 20 °C

      Inductance of closed circuit

      3.03 H

      Maximum operating rate

      1200 cyc/h 60 °C

      Coil technology

      without built-in suppressor module

      Control circuit voltage limits

    • operational: 0.75...1.2 Uc (at <55 °C)
    • drop-out: 0.15...0.4 Uc (at <55 °C)
      • Time constant

        25 ms

        Inrush power in W

        270-365 W (at 20 °C)

        Hold-in power consumption in W

        2.4-5.1 W at 20 °C

        Unit Type of Package 1


        Number of Units in Package 1


        Package 1 Weight

        288 g

        Package 1 Height

        6.2 cm

        Package 1 width

        11.4 cm

        Package 1 Length

        17.2 cm
        Show all specifications

        Documents & downloads

        hide show
        Filter items
        • All

        • Product Brochures

        • Technical Data Catalogues

        • Installation Instruction

        • Product Environmental

        Frequently Asked Questions

        hide show

        What do the LA4D timing modules require for mounting on LC1D40A through LC1D65A contactors?

        Product Line:
        Tesys D line Contactors and Accessories

        Mounting this module to TeSys LC1D40A through LC1D65A contactor requires the use of the LAD4BB3 wiring adaptor. This adaptor can be fitted only to contactors with no coil suppressor.

        What is the replacement AC coil for LC1D/LC2D40, D50, D65, D80, and D95?

        AC Coil information for LC1D/LC2D40, D50, D65, D80, and D95

        Product Line:
        Tesys D Replacement Parts

        TeSys™ D AC Coils


        Is 240 volt replacement control coil available for LC1D11500?

        Identifying replacement coil part number

        Product Line:
        IEC contactors and starters

        Products sold and used in the United States

        Replacement control coil needed for older style Tesys Contactor

        Yes, order LX1D8U5 for 50 hertz, LX1D8U6 for 60 hertz or LX1D8U7 for 50/60 hertz. Average coil consumption is 300 VA inrush 22 VA sealed for 50 hertz, 300 VA inrush 22 VA sealed for 60 hertz and 280 to 350 VA inrush 2 to 18 VA sealed for 50/60 hertz.

        CTA-ID : 11321

        What is the 240v coil to fit an LC1D1506

         The 240v coil is an LX1D8U7

        What is the maximum UL/CSA AC voltage rating of the LC1D power contacts ?

        Identifying maximum voltage of an LC1D contactor

        Product Line:
        TeSys D Contactors

        IEC contactors and starters used in North America


        IThe maximum voltage per UL and CSA is 600VAC. 

        Does LC1D80BD have internal bi-directional diode?

        LC1D80 and LC1D95 bi-directional diode

        Product Line:
        TeSys™ D Contactors

        Contactor Accessories

        LC1D80 and LC1D95 does not have an internal bi-directional peak limiting diode on their DC coils. LA4DC3U (Screw connection of wire to the contactor coil terminals 24–250 Vdc, 3p-4p) must be ordered separately.

        The LC1D09 to LC1D38 have an internal diode by default on their DC coils.

        Where are the control coil terminals for TeSys LC1D09 to LC1D38 contactor?

        Determine the control coil terminal marking and location on LC1D09 to LC1D38 contactor

        Product Line: 
        Tesys D Contactors

        IEC contactors

        The coil terminals are marked A1 and A2, you can see them on the front of the contactor on the white part (control section).  They are next to the auxiliary contact (13/14, 21/22) terminals.

        What is the altitude derating for a TeSys D-Line contactor?

        What is the altitude derating for a TeSys D-Line contactor?

        Product Line:
        Digest 177 Section 18 : Contactors and Starters, IEC

        North American Products

        The contactors are fully rated up to 3000 meters. Following are derating multipliers for altitudes above 3000 meters for both voltage and current:

        3500m x 0.90
        4000m x 0.80
        4500m x 0.70
        5000m x 0.60

        3500m x 0.92
        4000m x 0.90
        4500m x 0.88
        5000m x 0.86

        For example, an LC1D80 at 5000 meters:
        - The maximum rated operational voltage is 1,000V (IEC947-4) and 690V (UL/CSA). At 5000 meters it becomes 1000V x 0.6 = 600V (IEC947-4) and 690V x 0.6 = 414V (UL/CSA).
        - The maximum rated operational AC3 current is 80A. At 5000 meters it becomes 80A x 0.86 = 68A.


        What is the part number for a 3 pole 18amp 24VDC coil contactor with front mounted auxiliary with 1 N/O & 1 N/C contact?

        The part number for a 3 pole 18amp 24VDC coil contactor with front mounted auxiliary with 1 N/O & 1 N/C contact is - LC1D18BD & LADN11

        For further information, visit the link below:-
        User-added image
        User-added image

        What is the difference between the LAD4TB and LAD4TBDL bi-directional peak limiting diode?

        Identifying the difference between LAD4TB and LAD4TBDL

        Product Line:
        IEC contactors and starters

        Products sold and used in the United States

        Identifying the difference between two similar part numbers

        The LAD4TB is for 24V AC coils for the Tesys Series LC1D09 through LC1D38 contactors when supplied with G7 voltage code. The LAD4TBDL is 24 vdc bi-directional diode offered as a replacement if for some reason the diode supplied with the Tesys LC1D09 through LC1D38 contactors when ordered with BD or BL voltage code breaks or is no longer working.


        Can a GV2AF3 or GV2AF4 interconnection block work on a contactor with a DC coil?

        Mounting adaptor for GV2 and LC1D contactor

        Product Line:
        Motor Starters and Protectors

        TeSys GV Manual Starter and Protectors
        Tesys D Contactors
        The GV2AF3 clip has to be moved to the DC position to accommodate the contactor with a DC coil.