hide show
Product name
Product or component type
differential thermal overload relay
Device short name
Relay application
motor protection
Product compatibility
  • LC1D95
  • LC1D80
    • Network type
    • DC
    • AC
      • Thermal protection adjustment range
        55-70 A
        [Ui] rated insulation voltage
      • power circuit: 1000 V conforming to IEC 60947-4-1
      • power circuit: 600 V conforming to CSA
      • power circuit: 600 V conforming to UL
        • Network frequency
          0...400 Hz
          Mounting support
        • plate, with specific accessories
        • rail, with specific accessories
        • under contactor
          • Tripping threshold
            1.14 +/- 0.06 Ir conforming to IEC 60947-4-1
            [Ith] conventional free air thermal current
            5 A for signalling circuit
            Permissible current
          • 0.72 A at 500 V AC-15 for signalling circuit
          • 0.06 A at 440 V DC-13 for signalling circuit
            • [Ue] rated operational voltage
              690 V AC 0...400 Hz
              [Uimp] rated impulse withstand voltage
              Phase failure sensitivity
              tripping current 130 % of Ir on two phase, the last one at 0
              Control type
            • red push-button: stop
            • blue push-button: reset
              • Temperature compensation
                -20-60 °C
                Connections - terminals
              • power circuit: screw clamp terminals 1 cable(s) 4-35 mm² flexible without cable end
              • power circuit: screw clamp terminals 1 cable(s) 4-35 mm² flexible with cable end
              • power circuit: screw clamp terminals 1 cable(s) 4-35 mm² solid without cable end
              • control circuit: screw clamp terminals 2 cable(s) 1-2.5 mm² flexible without cable end
              • control circuit: screw clamp terminals 2 cable(s) 1-2.5 mm² flexible with cable end
              • control circuit: screw clamp terminals 2 cable(s) 1-2.5 mm² solid without cable end
                • Tightening torque
                • control circuit: 1.7 N.m - on screw clamp terminals
                • power circuit: 9 N.m - on screw clamp terminals
                  • Height
                    123 mm
                    75 mm
                    121 mm
                    Net weight
                    0.51 kg
                    Compatibility code
                    Protective treatment
                    TH conforming to IEC 60068
                    IP degree of protection
                    IP20 conforming to IEC 60529
                    Ambient air temperature for operation
                    -20-60 °C without derating conforming to IEC 60947-4-1
                    Ambient air temperature for storage
                    -60-70 °C
                    Flame retardance
                    V1 conforming to UL 94
                    Mechanical robustness
                  • vibrations: 6 Gn conforming to IEC 60068-2-6
                  • shocks: 15 Gn for 11 ms conforming to IEC 60068-2-7
                    • Dielectric strength
                      6 kV at 50 Hz conforming to IEC 60255-5
                    • IEC 60947-4-1
                    • ATEX D 94/9/CE
                    • UL 508
                    • CSA C22.2 No 14
                    • EN 60947-4-1
                    • IEC 60947-5-1
                    • EN 60947-5-1
                      • Product certifications
                      • BV
                      • DNV
                      • ATEX INERIS
                      • GL
                      • GOST
                      • CCC
                      • UL
                      • CSA
                      • RINA
                      • LROS (Lloyds register of shipping)
                        • Sustainable offer status
                          Green Premium product
                          REACh free of SVHC
                          EU RoHS Directive
                          Toxic heavy metal free
                          Mercury free
                          RoHS exemption information
                          China RoHS Regulation
                           Pro-active China RoHS declaration (out of China RoHS legal scope)
                          Environmental Disclosure
                          Circularity Profile
                          18 months

                          Documents & downloads

                          hide show
                          Filter items
                          • All

                          • CAD Files and Packs

                          • Product Brochures

                          • Movies

                          • Technical Data Catalogues

                          • Technical Leaflet

                          • Handout

                          • Installation Instruction

                          • End of Life Manual

                          • Product Environmental

                          • Data Bulletin

                          • Operating Manuals

                          • Declaration of Conformity

                          • Certificates (MSDS)

                          • White Paper

                          • Marine Certificate

                          Frequently Asked Questions

                          hide show

                          What are the wiring terminals on the IEC LRD* overload relays?

                          Product Line:
                          Tesys D line Overload Relays
                          The normally closed overload contact are terminals 95 & 96; and the normally open overload contact are terminals 97 & 98.
                          T1 T2 and T3 are the load terminals. 

                          The normally closed control circuit contact will open when there is a fault, this contact is typically used in series with the control circuit. 

                          The normally open trip signal contact closes when a fault occurs which is typically used to control a pilot light, or alarm. 


                          What overload to suit LC1D95U7 need to be 80-104A

                           Part code for the overload LRD3365

                          How to use LRD01…35 LRD33•• & LRD43•• and LRD33** as an indepentent relay?

                          The LRD relays has a solid tag to be used with LC1D** contactors. If you are not using LC1D contactors then using the following accessories you can terminate cable directly.

                          For LRD01…35 use the following part: LAD7B106
                          For LRD33•• & LRD43•• (3) use the following part: LA7D3064

                          What is the overload for the LR2D Everlink range 23-32 Amps?

                          The correct code is LRD332.

                          What is the reference for the separate mounting kit for LRD4369 overload relay

                          The LRD43xx type of thermal overload relays are directly mounted to the contactors LC1D115 & LC1D150 only. There is no separate mounting kit for the LRD43xx.

                          If a separate mounting is required for the contactors LC1D115 or LC1D150 type, then LRD336xx shall be selected as these range of overload relays have indepentdent mounting and have similar setting range and are of Class 10A.

                          Will the Compact NSX breaker be for sale in the USA or Canada?

                          Where can I buy a Compact NSX breaker?

                          Product Line:
                          Circuit Breakers

                          This breaker is popular overseas and there is interest in the US

                          There are no plans for a general release of the Compact NSX breaker line in North America, since the NSX is not UL Listed to UL489. (UL 489 is the standard commonly required in the US.) In the US, the Powerpact Circuit Breakers should be used (Powerpact breakers are UL, CSA and IEC-rated).

                          If an existing piece of equipment has an NSX breaker which needs replacing, we have made a few catalog numbers available for sale in the US. The list of numbers will vary based upon need. Contact your local authorized Schneider Electric distributor for assistance on your specific NSX catalog number.

                          For support on these breakers, Please see the following link to Global Operations where you can select other Countries:

                          How Can the LC1D50AU7 Contactor be mounted?

                          Two ways -  the LC1D50AU7 can be DIN Rail mounted and Plate mounted.

                          See the attached datasheet for further information.

                          What overload can be used with an LC1D65AU7?

                          You can use the Everlink range which is LRD313 - LRD365

                          What is the replacement for the old thermal overload relay LR2D3359?

                          The part number is as follows: LRD365

                          What is difference between LC1D50U7 and LC1D50AU7?

                          Following are the differences between the LC1D50U7 and the LC1D50AU7:

                          LC1D50AU7 has everlink terminals.
                          LC1D50AU7....is slightly larger case and accommodate LRD3XX overloads
                          LC1D50U7 contactors accommodate LRD33XX overloads.


                          What is the part number of a 23A -32A overload to fit LC1D40U7 contactor?

                          LRD3353 is a 23A -32A overload to fit LC1D40U7 contactor. 
                          For further information, please visit https://www.schneider-electric.com/en/product/LRD3353/tesys-lrd-thermal-overload-relays---23...32-a---class-10a


                          What is the replacement overload similar to LR2D1301

                          LR2D1301 discontinued 30/11/2003. Use a LRD01.

                          Is the LR9D5369 overload still available

                           Yes it is

                          What is the part number for a non everlink overload with same rating as the LRD350?

                          Part number for a non everlink overload similar current rating is the LRD3357, see data sheets on both



                          User-added image LRD3357            User-added imageLRD350

                          What is the part number for a class 20 version of the LRD340

                           The part code LRD340L

                          What is the overload for LC1D65AU7 Contactor, when rating is 20-25A ?

                          17-25 Amps = LRD325
                          23-32 Amps =LRD332

                          What is the difference between A9D32620 and A9D33620 RCBO Acti 9 devices?


                          A9D33620 = SI (Super Immunised)
                          A9D32620 = Type A (AC or pulsating DC)

                          Type A RCBO = Tripping is ensured for residual sinusoidal alternating currents and residual pulsating direct currents, whether suddenly applied or slowly rising.
                          Type Si RCBO = With all the features of a Type A device, “Si” type Super Immunised earth leakage protection range has been specially developed to be used with loads or in environments causing disturbances. Examples are lightning or switching surges, harmonics generated by increasing number of loads and constant load leakage current from electronic ballasts, speed drives, computers, etc. The Si increases safety and allows improved continuity of supply.

                          Can the Masterpact NT or NW type breaker be used at 400Hz or at 200Hz?

                          The Masterpact NT and NW style breakers are standard power distribution breakers and are not tested or UL listed for use at 200 Hz or 400 Hz. They are not recommended for use at any frequency except standard 50 or 60 Hzpower.

                          CTA-ID : 2053361

                          What is the replacement for LR2D3357?